combustion system Articles

  • What`s the Best Air Pollution Control Technology for My Process?

    Air pollution control equipment is not something that business owners address by saying, “Let’s do the right thing for the environment and install an oxidizer!” In fact, the scenario is more likely to be “We need to increase productivity (always a good thing!), but that will put us over our annual emissions limits. Do we know what we will need? Where do we start? Who can ...

  • Top 5 incineration myth busters

    There are a lot of myths and misconceptions out there when it comes to incinerators and with many people feeling uncertain of what they actually need when in a position to purchase a incinerator, it is sometimes difficult to tell fact from fiction.  Every day we have multiple phone calls from existing and potential customers asking the same ...

  • Fire Codes: A Foundation of Safety for a Rapidly Changing World

    Chief among these safety features is fire protection. There are myriad codes and regulations relating to fire safety in commercial buildings, from standards on portable fire extinguishers to the installation of stationary pumps for fire protection — the U.S.- based National Fire Protection Agency (NFPA) alone has more than 300 consensus codes that have been adopted in whole or in part ...

  • LED Applications for Oil and Gas Refining and Processing

    Oil and gas processing facilities are unsafe due to the existence of hazardous compounds during operations. When addressing such issues, companies in the sector may deploy explosion proof lighting systems to prevent the ignition of sparks created from the electrical equipment. The adoption of LED technology in oil and gas refineries has helped reinforce key safety measures associated with ...


    By Larson Electronics LLC

  • The ‘ins and outs’ of air quality monitoring

    The National Institute for Health and Care Excellence (NICE) recently issued draft guidance on ‘Air pollution - outdoor air quality and health.’ In the following article Jim Mills, Managing Director of Air Monitors Ltd, explains why there will need to be more funding for monitoring if the mitigation measures mentioned in the guidance are to be implemented effectively. Jim also ...


    By Air Monitors Ltd.

  • Redundant combustion plant for Novartis

    Type     HOFGAS®- IFM4c/2200/1500/60/180 Commissioning     2004 Site     Novartis (Basel, CH) Situation In order to prevent production failure due to missing redundancy in the flue gas clean up, Novartis required an additional system. During different production processes exhaust air load with organic components is formed. ...


    By Hofstetter BV

  • Understanding the dangers of combustible dust

    Paper shredding is growing into a big business. Recycling and the green movement certainly planted the seeds, but regulators have added the fertilizer. Industry-changing laws have been passed to govern document security in accounting, healthcare and banking, and shredders of many varieties are becoming the tools of those trades.Five or six years ago Warde Comeaux knew only a few people who ...

  • Application of combustion analyzers in safety instrumented systems

    The combustion process has always been considered having the potential for a hazardous event which could lead to personnel injury or loss of production. To mitigate this risk, the process industry is now implementing Safety Instrumented Systems which can identify hazardous operating conditions and correctly respond in such a way to bring the combustion process back to a safe operating condition ...

  • Environmentally safe combustion of corrosive solvents

    Type     HOFGAS®- IFM4c/350/100 Commissioning     2002 Site     EMS DOTTIKON (Dottikon, CH) Situation By September 2002 EMS Dottikon AG had started the operation of the new production plant for pharmaceutical substances. As a result of the drying process 0..100Nm³/h off-gas is expelled batch wise. The main compound is ...


    By Hofstetter BV

  • Size reduction of substitute combustibles (RDF)

    The new pilot installation of SITA Wiebe GmbH, Bielefeld/Germany, processes highly calorific commercial and industrial waste to become quality-assured substitute combustibles for cement industry and/or power plants. Basic items of this ultra-modern processing installation are two one-shaft size reduction machines of type WLK 30 Super-Jumbo of WEIMA Maschinenbau GmbH, Ilsfeld. The total output of ...


  • High temperature combustion of landfill gas

    Type     Compact plant HOFGAS® - Efficiency 250 Commissioning     December 2001 Site     Storkohmo landfill, Kokkola (FIN) Situation Storkohmo landfill is located 400km north of Helsinki on Finland's west coast near the city of Kokkola. Based on local legislation requirements ( reduction of green house gas emissions ) the ...


    By Hofstetter BV

  • Catalytic combustion of fuels and existing ways for its implementation

    The new technology of flameless high-temperature combustion of fuel on the basis of catalytic method has the advantages consisting of the ecological cleanliess of process, the growth of volume thermal stress of furnace space and the reduction of specific quantity of metal and boiler cost. Application of catalytic boiler plants allows to bring in the maximum produced heat to the customers. Thus, ...


    By Inderscience Publishers

  • Horizontal Mixers for Secondary Combustibles - Case Study

    The manufacture of secondary combustibles from household waste, industrial waste and special waste in accordance with statutory requirements is to be a huge challenge for system suppliers in the coming years. Currently, at times, extremely differing substances are treated in such a way that they can be loaded into conventional furnaces. The most important requirement is the detailed control over ...


    By AVA - Huep GmbH u. Co. KG

  • The bioethanol blending with gasoline promotes its full combustion

    There are actively proceeding world discussions about oil and alternative energy sources. First of all should be mentioned bioethanol, as the most capacious product. Today oil and gas are the main power sources in the world and therefore reduction of their use is the main priority in work of many countries governments. These days many farmers invest in construction of the enterprises for ...


    By GlobeCore GmbH

  • Corrosion Problems Arisen from the Use of Alternative Combustibles

    Introduction Metal Corrosion has been a subject of growing important in cement furnaces during the past few years. This development is mainly a result of the tendency to use alternative fuels with ...


    By Castolin Eutectic

  • Why high temperature combustion of landfill gas?

    Due to the accumulation of knowledge and the tightening of environmental law, the landfill technology has increasingly become concerned with the management of trace compounds in landfill gas. With landfill gas, contamination is through sulphur, chlorine, fluorine, halogenated hydrocarbons and heavy metals. Other trace elements such as volatile organic compounds (VOC), impose environmental ...


    By Hofstetter BV

  • Paint booths, or areas using combustible gases: why a requirement for combustible gas monitor might be necessary

    Paint booths save time and ensure a smooth and professional application of paint in a range of industries, including automotive, aerospace, home decor, furniture, and more. Combustible gases and fluids in the paint booth environment can pose a health hazard if something goes wrong. Explore the hidden dangers of paint booth fluids and gases, and learn how a ...

  • Improving Fuel Efficiency - Fred Weber, Inc. Realizes Significant Fuel Savings Using Combustion Catalyst Systems

    To see and hear the two Caterpillar 988Fs loading the crusher at Fred Weber's North Stone Quarry in Maryland Heights, Mo., one might think they are just like any other large wheel loaders working on any other quarry or construction job site in the Midwest. They look, sound and run like any well-maintained 988Fs would as they move quickly between the piles and the plant, but these are different; ...

  • Analytical and experimental study on bending vibration of internal combustion engines shafting system based on wave equations

    This paper proposes a new analytical approach to study the bending vibration of N step shafting system. Changes of the shaft step properties under rotary condition are governed by two–dimensional wave equations. The source of the bending vibration is first analysed. Then strain and stress equations of the spinning shaft are established. After Hamilton principle is applied, a two–dimensional wave ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you