combustive air Articles
-
Karlstad Project - Case Study
With Heden Etapp 3 Karlstad Energi is phasing out the last fossil fuel boiler from production. The new biomass boiler is 88MW and 22 MW flue gas condensation. Our delivery is a condensation plant with combustion air moistening and pre-heating and condensate purification with membrane ...
-
Gas to Air Unit, Automotive, Aluminium Furnace, USA 2008 - Case Study
Econotherm GA 360 smooth pipe heat exchanger. 500 kW combustion air pre-heater. High particulate matter exhaust from furnace. Low fouling, easy cleaning and maintenance, high reliability. Unit positioned outside main factory premises. Customer advised it was not possible by consultants (acid ...
-
Lahti, Finland Project - Case Study
Lahti Energia in Finland is now building a new 150 MW biomass fired boiler. For this project Radscan shall deliver complete condensation plant including combustion air humidification, condensate polishing and make-up water treatment. Montage start in February 2018, takeover in January ...
-
Carbon Trading in the European Union: `Calculation` vs `Measurement`
This paper describes the main provisions for Monitoring and Reporting under the European Union’s Emission Trading System (EU ETS). For the largest installations, the ‘Calculation’ approach is based on the measured fuel consumption, fuel carbon content and oxidation factor (completeness of combustion). The latest phase of the EU ETS attempts to put the alternative ...
-
Applications guide to mass flow measurement in the pulp & paper industry
Rising costs and tighter emission control requirements have created a need for information that is more useful and precise. Sierra thermal mass flow meters fill this need and support cost-effective mill management in die following applications: Increased Boiler Efficiency Mills need to measure the How of combustion air to the recovery or power boiler to provide accurate air flow signals during ...
-
Air quality and health research in a province producing oil and gas
The Canadian province of Alberta is a major world producer of oil and gas. It is therefore vested in issues of air quality and health, which are in turn driven by fossil fuel combustion. The scientific community within the province provides the capacity to address these issues and in order to remain current needs to be actively engaged in research. Air quality is generally very good in Alberta. ...
-
Calciner Tempering for Phosphate Production
Backward Curved Blower In this Calciner Tempering installation, we retrofitted backward-curved blowers to replace our customer’s existing fans for increased efficiency and longer fan life. Using 300 HP customer-supplied motors, we incorporated a flexible coupling drive, unitary base, and pie-split housing for easier maintenance access to the fan wheel and shaft. The high-efficiency ...
-
Moisture measurement of wood chips with M-Sens - Case Study
Customer: Biogas plant Product: Wood chips Moisture range: 20 – 60 % Installation: After the shredding machine Function: Measuring the moisture of wood chips APPLICATION In a biomass power plant, the combustion of biomass generates electricity and heat. The operator of a biofuel plant was looking for a solution that would provide him with information on the moisture content of the biomass ...
By ENVEA
-
Värtan Kvv8 Project - Case Study
Fortum Värme new plant - KVV8 at Värtaverket in Stockholm, with its 345MW is to our knowledge the largest biomass-fired boiler equipped with flue gas condensation. In favourable operating conditions a whopping 100 MW heat can be recovered by condensation. Radscan delivery is composed of condensation with combustion air moistening and pre-heating. Condensate purification up to boiler ...
-
Mugen-Honda Motorsports - Milton Keynes, UK - Case Study
Perhaps no other recent project best demonstrates our design capability more than this high performance engine test facility we developed and built from the ground up to support the highest level of motorsport. We produced a short video about this industrial engine facility project, which highlights: Our vehicle facility design/build philosophy Our customer working style Our proprietary ...
-
Low emission combustion of Oilgas
Type HOFGAS®- IFM4c/2300/150 Commissioning June 2001 Site Cistierna (ES) Situation Enervisa SA in Cistierna own a plant for the recycling of old oils. The oil is evaporated and condensed into high-grade fuel. The reclaimed fuel is used in diesel engines for production of electricity as well as in burners for the generation of process heat. A part of the oil vapour cannot be ...
-
Engine Test Facility Design Project - Mugen-Honda Motorsports | Milton Keynes, UK - Case Study
Perhaps no other recent project best demonstrates our design capability more than this high performance engine test facility we developed and built from the ground up to support the highest level of motorsport. We produced a short video about this industrial engine facility project, which highlights: Our vehicle facility design/build philosophy Our customer working style Our proprietary ...
-
Process Heater - Case Study
Project Details Customer Name: Centrica Storage The Brief: Provide heat for Rough storage field offshore rig Location of Installation: Rough Platform Products supplied: Water/Glycol Process Heater Project Duration: Typically 9 months The Solution Process Combustion was selected to provide a replacement heating medium heater for use on the Rough Storage off shore rig. The heater ...
-
Better combustion airflow monitoring at the Hunan Yiyang power plant
China has experienced tremendous growth in electricity demand over the past two decades. Coal-fired plant construction has exploded in the country to meet its seemingly insatiable appetite for electricity. Because most power plants in China use coal as fuel, it is imperative that new coal-fired plants be as clean and efficient as possible. This demand for cleaner plants has led to new and ...
-
Process Combustion Thermal Oxidisers - Tobacco Drying & Incineration Recuperative Thermal Oxidiser
Process Combustion have supplied several thermal oxidiser and process heater units for the tobacco processing industry. The thermal oxidiser provides heat into the tobacco drying loop using a recycle heat exchanger. An exhaust stream from the drying loop is supplied to the thermal oxidiser, where it reaches a temperature of 800°C to oxidise contaminents. Waste heat is also r ecovered to ...
-
Industrial Fan or Blower: What’s the Difference?
In the world of centrifugal fans and blowers for industrial process applications, “what’s the difference between a fan and a blower” is a trick question. That’s because there actually is no difference at all. That’s right. Whether you need an industrial fan or blower for your operation, the product designs are the same. How can that be? Well, the truth is that in ...
-
LATEST TECHNOLOGY: Low Cost INDUSTRIAL OXIDIZER SYSTEMS
SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else: (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator, (3) VERY SMALL FOOTPRINT - - usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring controls. ...
-
Case study: EPA region 9
ISTR Overview Neighborhood: Industrial Heating Tubes: 14 Target Temp: 325 ˚C Heating Period: 130 Days Target: 0.9 mg/kg for Benzene Contaminant: TPH-d TPH-mo Benzene Naphthalene BaP Geology: Silty Sand Clay Well to Poorly Graded Sand In Situ Thermal Remediation was used to successfully treat benzene, TPH-d, TPH-mo, BaP, and Naphthalene from a former gas plant in EPA Region 9. Gas Thermal ...
-
Case study - Carbon fibre: furnace & oven emission control
OverviewA carbon fiber company in China was faced with the challenge of selecting an emission control system for a new pilot line at their specialty fiber products facility. The line would include furnaces and three ovens, both of which would emit Carbon Monoxide (CO), Ammonia (NH3) and lethal amounts of Hydrogen Cyanide (HCN). ActionThe carbon fiber processor selected Anguil Asia because of ...
-
LATEST TECHNOLOGY: Small PAINT BOOTH OXIDIZERS with Heat Recovery
SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else: (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator, (3) VERY SMALL FOOTPRINT - - usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring controls. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you