concrete thermal resistivity Articles

  • The effect of reinforced concrete frames on the thermal performance of residential villas in hot climates

    This paper investigates the impact of reinforced concrete (RC) frames and structures on the thermal performance of a typical residential villa in Kuwait. In the approach, a simplified method to calculate the effective overall heat transfer coefficient and the overall thermal resistance of a construction was used in conjunction with a comprehensive building energy simulation program (ESP-r), to ...


    By Inderscience Publishers

  • Waste to energy – processing waste with a high thermal value to substitute combustibles

    With the taking effect of the TASi (Technical Regulations on Estate Waste) in 2005, non-treated waste must no longer be disposed of and deposited. Commercial and industrial residues with a high thermal value such as rejects from paper industry, punchings from rubber and plastics, and other mono-fractions which are characterized by homogeneity and constant combustible properties through mechanical ...


  • £16 million refurbishment of London Bridge Station

    Main Contractor: Costain  Groundworks: Substructure Protection Systems London Bridge Station Work at London Bridge railway station is part of the Government-sponsored Thameslink Programme. With completion scheduled before the end of 2018, the station will have more ...

  • 3-D Woven Technology: The “Next Generation” in Turf Reinforcement Mats

    The designers at Propex have taken the technology in their high performance turf reinforcement mats (HPTRMs) and used it to design the next generation of turf reinforcement mats (TRMs). These new netless, composite-free three-dimensional woven TRMs are designed to deliver superior, long-term performance, and are proven to outperform traditional methods like rock riprap, concrete paving and first ...

  • The essential functional features of the high-speed CNC grinder

    High-speed CNC grinder has very high requirements for the main functional parts. First of all, it requires to be a high spindle speed and power. Secondly, cnc hard turning lathes table requires a high feed rate and motion acceleration. What’s more, NC grinding’s ...


  • GEM provides fast payback for Italcables

    Metered tests carried out on Thermal Energy International’s GEM steam traps by Italcables, Italy’s largest producer of wire strands for pre-stressed concrete and post-tensioned structures, have shown steam savings of up to 30% compared to mechanical traps.  Now, Italcables has fitted GEM traps to its steam baths and kettle boiler used for ‘pickling’ and treating iron ...

  • Greening the Built Environment

    ASTM Standards and Products Form the Foundation of Sustainable Construction Efforts Today, a major focal point for the worldwide building industry is the growing demand for sustainable construction. Sustainable, or “green,” construction is focused on the more effective use of resources and ultimately the creation of healthier, energy efficient, more environmentally ...


    By ASTM International

  • ASTM’s Technical Information Resource

    All of ASTM International’s standards, papers and chapters, and books can be found, searched and subscribed to in one resource, ASTM Compass. A researcher investigates a new asphalt additive and tests with a standard from Committee C09 on Concrete and Concrete Aggregates. An ...


    By ASTM International

  • Protective Coatings

    Coatings An industrial coatings is a paint or coating defined by its protective, rather than its aesthetic ...


    By Ultimate Linings

  • Case Study - Source Area Remediation of PCE in Soil - Fair Lawn, New Jersey

    TRS Group, Inc. (TRS) was retained by Anderson Mulholland and Associates, Inc. (AMAI) to perform an Electrical Resistance Heating (ERH) remediation of DNAPL in soil at the former Topps Dry Cleaners property in Fair Lawn, NJ. The remedial goal of this project was a reduction of tetrachloroethene (PCE) in soil to less than 1 milligram per kilogram (mg/kg) in every soil sample. Final confirmatory ...


    By TRS Group, Inc.

  • UAE’s MISP center accelerates pre-commercial tech development

    Almost three years after launching the Middle East’s first CSP plant, Masdar joined with Masdar Institute to launch late last year the region’s first CSP research and demonstration centre. Masdar Institute Solar Platform (MISP) builds around a set of unique facilities including a 100kW beam-down concentrating tower and its solar field, a hot-oil loop and thermal energy system (TES), ...


    By FCBI Energy

  • Recycling asphalt shingles a boon for Minnesota C&D Recycler

    The Northeast Recycling Council estimates that more than 11 million tons of asphalt shingles are scrapped in the U.S. each year; 10 million from installation tear-offs and re-roofing jobs and another one million discarded as waste by asphalt shingle manufacturers. The U.S. Environmental Protection Agency estimates that shingle waste makes up 8 percent of the total building-related waste stream ...


    By Vermeer

  • Stainless Steel Sector Gets Its Sights on Sustainability

    Sustainable development continues to filter down into the business world. In April, the British Stainless Steel Association held its first conference on the theme. Delegates heard that stainless steel may have a vital role in solving environmental problems in applications such as renewable energy projects and more fuel-efficient vehicles. But they were also told that regulatory and competitive ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you