condition monitor Articles

  • The future is condition monitoring

    It’s been a big month here at Hansford Sensors. We kicked off November by celebrating our 10thanniversary, during which time we were playfully predicting what our company may look like in another decade. While our thoughts on this are strictly hypothetical at this stage, thanks to the release of a new report we now have a better idea of the state of the condition monitoring ...


    By Hansford Sensors

  • Volvo dealer in Sweden compares air quality indoor and outdoor - Case Study

    Two AQMesh pods were used to measure NO, NO2, O3 and CO during May and June 2017 at the largest combined Volvo, Ford and Renault car dealer in Stockholm, Sweden, located on the highway between Stockholm city centre and Arlanda airport. The objective was to measure the air quality outside and inside the combined showroom and workshop, demonstrating the importance of measuring common ...


    By AQMesh

  • What are the main indicators of water quality?

    “Water is the driving force of all nature;” so said Leonardo da Vinci. The survival of our planet depends on the availability of water and the condition that it is in. It is therefore vital to make sure that it is able to provide a hospitable environment for those that live in it, and is free from harmful levels of substances for those that drink it. Not ...


    By Aquaread Limited

  • New Condition Monitoring Frame Agreement

    Arise Windpower and Brüel & Kjær Vibro enter into a frame agreement for remote condition monitoring of wind turbines Arise Windpower are very pleased to have entered into a Frame Agreement with Brüel & Kjær Vibro for the supply of condition monitoring solutions for wind turbine applications. "We believe that using one common condition monitoring system ...


    By Brüel & Kjær Vibro GmbH

  • Global monitoring of marine fuels and machine condition

    The “Shipping, Marine and Ports World” has published in its Dec 2012-Jan 2013 issue, an article written by Dr. Helene Gutman (CTO, Xenemetrix Ltd.). The article presents: The use of EDXRF analytical method systems that enable fleet management to optimize bunkering and machine maintenance.   The new sulfur emission regulations for ocean going vessels present a serious challenge ...


    By Xenemetrix Ltd.

  • Online condition monitoring of electrical power system imbalance

    Symmetrical components are of great importance in many applications in electrical power systems, such as power protection and condition monitoring. This paper presents a computer-based algorithm for online symmetrical components estimation. The proposed algorithm uses the samples of the phase variables (currents or voltages) to estimate the magnitude and phase angle of each phase phasor at each ...


    By Inderscience Publishers

  • New Condition Monitoring and Analysis System VDAU-6000

    Brüel & Kjær Vibro announces the world-wide release of the new VDAU-6000. This state-of-the-art condition monitoring system provides an economical alternative to rack-based systems for condition monitoring of rotating machinery, in particular auxiliary machines and balance-of-plant applications. The high density 16-channel parallel processing functionality also lends itself to the ...


    By Brüel & Kjær Vibro GmbH

  • Asset condition estimation and depreciation

    Vitens is one of three water companies in The Netherlands, with 2.3 million connections, 5.4 million customers, 47,5000km of pipes and 96 treatment works that provide 330M.m3 a year of potable water at a cost of €1.32/m3 ($1.72/m3). Each day the company receives calls from customers reporting leaks. The maintenance division provides information on the pipe material and diameter, and the business ...


    By Innovyze

  • Current Bridge Conditions in the United States.

    Bridges have been used throughout history to solve problems related to crossing an obstacle or getting past difficult terrain. They are essential for moving goods, people and connecting the country. Currently, most of the nation’s bridges are in poor condition and continue to deteriorate as time passes. Roughly 66,000 bridges ...


    By EnTech Engineering, Inc

  • Landfill site improvement condition for PPC permit

    The installation is a landfill site licensed for the disposal of inert waste. It lies in a potentially sensitive location on the flood plain of the River Great Ouse, near Milton Keynes and it is therefore important to the client to ensure good environmental monitoring is undertaken. The site is divided into two sections, (the north western area and the south eastern area) by the River Great Ouse, ...


    By ESI Consulting

  • Diatoms for assessing the ecological condition of inland freshwater bodies

    The ecological responses of diatoms to pollution and nutrient enrichment, caused by domestic and municipal sewage, in the five fresh water ponds have been examined. It was observed that diatoms were completely absent in P3 and some species were also absent in P1 and P2. Similarly, diatom diversity was lower in P1 and P2 than in P4 and P5. However, diatom abundance was higher in P4. The Biological ...


    By Inderscience Publishers

  • Some reflections on the conditions for favouring Integrated Sustainability Assessments

    Integrated Sustainability Assessment (ISA) should be both transformational and humble. This paper examines the political and institutional conditions that will be required to create an appropriate policy analysis framework that will embrace ISA. This will mean better connections between agencies that deliver and departments that ponder and finance. Such a combination will not be easy as there is ...


    By Inderscience Publishers

  • The Measurement and Prediction of Conditions within Indoor Microenvironments

    Biocontaminants, such as dust mites and microfungi, can live in building habitats with a spatial scale of only a few millimetres. With the recent development of very small size microchip-based sensors, it is now practicable to measure the humidity at different locations within these microenvironments. In the laboratory study described here, sensors were used to measure the conditions in a number ...


    By SAGE Publications

  • Integrated condition assessment for Navy system of systems

    Although the US Navy has made great strides in integrating technology to monitor and assess the condition of sub–systems, little is understood about how to fuse this data in order to construct a higher level awareness of the ship's overall readiness or current state. Drawing upon systems theory and systems–based approaches, we identify principles of hierarchy, control, suboptimisation, and ...


    By Inderscience Publishers

  • Variability of PM10 concentrations dependent on meteorological conditions

    The influence of atmospheric exchange conditions on near-surface PM10 concentrations is analysed for four cities in the South-West of Germany in the period from 2001 to 2005. For each city, the PM10 data originates from roadside stations and Urban Background (UB) stations, that is, two types of official urban air quality monitoring stations characterised by different emission situations. The ...


    By Inderscience Publishers

  • Effect of different water conditions on dissolution of nanosilver

    This study evaluates the time-dependent dissolution of nanosilver (nAg) in common electrolytes and natural waters. nAg was synthesized via Tollens’ method using sodium citrate as stabilizer; its morphology, UV–Vis spectrum, and particle size were characterized. The dissolved silver was monitored over time using filtration, centrifugation, and inductively coupled plasma atomic ...


    By IWA Publishing

  • Biotreatment of Odors from the Zimpro Sludge Conditioning Process

    Management of odor emissions generated during thermal sludge conditioning is a well known disadvantage of the “Zimpro” process. Traditional methods of using chemical oxidation and high temperature destruction result in the formation of secondary products, such as chlorine gas, organic halocarbons or nitrogen oxides. In this study, biotrickling filter technology was evaluated at the Villa Hills ...


    By PRD Tech, Inc.

  • Mobil plastics europe uses condition monitoring to meet an ever increasing market demand – a compass case story

    US-based Mobil began operations in Europe in 1980with the opening of their first Orientated Polypropylene (OPP) production line at the Virton Latour site in Belgium. Since then, it has grown to become a leading producer of OPP films, with further plants opened in Brindisi, Italy and Kerkrade, The Netherlands. With the demand for plastics far exceeding the level of worldwide production, Mobil ...


    By Brüel & Kjær Vibro GmbH

  • Developing Reference Conditions For Phytoplankton in The Baltic Coastal Waters

    For the implementation of the Water Framework Directive reference conditions have to be established for the various quality element. In this report we outline a number of approaches that can be pursued for establishing reference conditions for phytoplankton at a regional level and discuss the problems associated with their application. This report does not exhaust the topic of establishing ...


  • Dust monitoring

    Generally, two different approaches are used to measure the amount of dust deposited on a surface; Determination of the soiling of a surface, by a change in its properties; Determination of the quantity of dust deposited, by weight. WHAT IS DUST? Dust is a generic term used to describe fine particles that are suspended in the atmosphere. Dust comes from a wide variety of sources, including soil, ...


    By Queensland Laboratory

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you