condition monitoring analyzer Articles

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • Asset condition estimation and depreciation

    Vitens is one of three water companies in The Netherlands, with 2.3 million connections, 5.4 million customers, 47,5000km of pipes and 96 treatment works that provide 330M.m3 a year of potable water at a cost of €1.32/m3 ($1.72/m3). Each day the company receives calls from customers reporting leaks. The maintenance division provides information on the pipe material and diameter, and the business ...


    By Innovyze

  • Biotreatment of Odors from the Zimpro Sludge Conditioning Process

    Management of odor emissions generated during thermal sludge conditioning is a well known disadvantage of the “Zimpro” process. Traditional methods of using chemical oxidation and high temperature destruction result in the formation of secondary products, such as chlorine gas, organic halocarbons or nitrogen oxides. In this study, biotrickling filter technology was evaluated at the Villa Hills ...


    By PRD Tech, Inc.

  • "Non-Chemical Water Conditioning at Schick: A Pollution Prevention Case Study"

    Untitled Document Overview Since 1994, the Schick company of Milford has ...


    By Dolphin WaterCare

  • Method 301 Evaluation of Candidate conditional methods case study

    A new metal emissions measurement and validation system has recently been developed that has the potential to significantly improve our understanding of metal emissions from a wide range of source categories. This system consists of: A continuous emission monitoring system (Xact-CEMS) An instrumental analyzer procedure (Xact-IAP) A sampling and analysis measurement method ...


    By Cooper Environmental

  • Case study - Trinity River Authority verifies condition of C303 Pipeline

    Service: Assess and Address Client: Trinity River Authority of Texas Project Date: November 2012 - ongoing Location: Trinity River, TX Type of Pipeline: Water Transmission Main Diameter: 30-inch (750mm) and 54-inch (1350mm) Pipe Material: ...


    By Pure Technologies

  • Nuclear reactor coolant removal monitored by hydrogen measurements provided by Systech`s 542 programmable gas analyzers

    NNC Limited is using Systech's 542 programmable gas analyzers to monitor hydrogen off-gas in test rig for Dounreay Fast Breeder Reactor decommissioning. Decommissioning nuclear reactors is not only a matter of dealing safely with the radioactivity issues, non-nuclear contamination can be equally difficult to remove safely and economically. NNC Limited is currently developing a system to remove ...


    By Systech Instruments Ltd

  • Biofuels Gas Monitoring

    The Customer The Company is one of the world’s leading developers and producers of advanced fuels and green chemicals. The Process The Company uses a gasification process that breaks down wood chips, waste and other feedstock using plasma technology. The process produces a uniform synthetic gas (syngas) that is used to power their turbine engines. ...

  • Application of combustion analyzers in safety instrumented systems

    The combustion process has always been considered having the potential for a hazardous event which could lead to personnel injury or loss of production. To mitigate this risk, the process industry is now implementing Safety Instrumented Systems which can identify hazardous operating conditions and correctly respond in such a way to bring the combustion process back to a safe operating condition ...

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Organics Monitoring: A Practical Guide

    Preventing product loss, lowering waste treatment costs, and reducing system maintenance and energy consumption through organics monitoring in the chemical, refining, food, and wastewater treatment industries. Summary Process water and steam condensate contamination includes organic, inorganic, and biological components. Sources of organic contamination include process ...


    By GE Analytical Instruments

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • Monitoring Tools for Watershed Assessments

     Weston Solutions, Inc. (WESTON®) has designed and implemented a watershed-based monitoring program with the San Diego County Copermittees. The monitoring program includes three elements: Mass Loading Station (MLS) Monitoring, Stream Bioassessment Monitoring, and Ambient Bay and Lagoon Monitoring. The core program includes the collection and analysis of stormwater runoff during three storm ...


    By Weston Solutions, Inc

  • Weather Data for Noise Monitoring

    “Weather conditions are the single largest variable factor in how sound travels over large distances,” says Steve Bilawchuk principal partner and engineer at ACI Acoustical Consultants Inc. “Wind speed and wind direction are of crucial importance.” ACI is an acoustical engineering consulting company based in Alberta, Canada, which uses ...

  • Effects of highway construction on stream water quality and macroinvertebrate condition in a Mid-Atlantic Highlands watershed, USA

    Refining best management practices (BMPs) for future highway construction depends on a comprehensive understanding of environmental impacts from current construction methods. Based on a before-after-control impact (BACI) experimental design, long-term stream monitoring (1997–2006) was conducted at upstream (as control, n = 3) and downstream (as impact, n = 6) sites in the Lost River watershed of ...

  • Long-term effects of hydrometeorological and water quality conditions on algal dynamics in the Paldang dam watershed, Korea

    The primary goal of this study is to shed light on some important factors that control algal bloom in a large-scale regulated river system. Long-term impacts of environmental conditions on algal dynamics were investigated in the Paldang dam watershed, Korea. Dam inflow, water temperature, chlorophyll-a, TN, PO4-P and TP data collected at five major dams located on the North Han ...


    By IWA Publishing

  • Responses of groundwater vulnerability to artificial recharge under extreme weather conditions in Shijiazhuang City, China

    Artificial recharge is becoming one of the most important ways to deal with water shortage and induced environmental geological problems, but it also brings potential groundwater contaminant risks, especially under extreme weather conditions. A classic method, DRASTIC, and groundwater flow simulation model have been used to analyze the response of groundwater vulnerability to artificial recharge ...


    By IWA Publishing

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you