construction dust monitor Articles

  • Why monitor dust in the workplace?

    Almost any place of employment can present a potential threat to health and safety from airborne particulates and aerosols. It is important to note, however, that dust hazards are not necessarily visible to the human eye and that the finest particles can represent the greatest threat because of their ability to travel deepest into the lungs. Effective monitoring is therefore key to the ...


    By Ashtead Technology Ltd

  • The invisible fine dust

    Air is lifeblood. Daily we inhale approximately 15.000 liter. Still, the air contains invisible pollutants, which vary in its composition and concentration depending on the location. Especially the respirable particles with a diameter of less than 2.5 µm (PM 2.5) were considered to be particularly dangerous. According to a current study conducted by the Max Planck Society, ...

  • TSI dust monitors and Lufft weather sensors make a great team

    Both aerosols and wind speed and direction influence air quality significantly. This is why TSI Incorporated, a world leader in particle measurements, cooperates with Lufft USA in order to provide complete systems to measure PM2.5 (fine dust), PM10 (particles with a maximum diameter of 10 μm) as well as total PM levels. TSI Incorporated offers a variety of aerosol ...

  • Casella BOUNDARY Guardian helps to control noise and dust on major London construction project - Case Study

    Casella‘s BOUNDARY Guardian is helping to ensure noise compliance and control of air quality at BSkyB’s campus redevelopment site, bringing peace of mind to site operators, the client and the local community. The BOUNDARY Guardian is a system for web-based remote monitoring of noise and/or dust emissions that ensures compliance ...


    By Casella

  • Construction site health and safety failures

    As what is largely agreed to be the world’s most dangerous industry, construction site Health and Safety failures constitute potentially severe harm to worker wellbeing, with the capacity to severely impact quality of life or – put bluntly – end it. Running contrary to this doom-laden approach though, improvements to the industry typically arise from assessing ...


    By SHEilds Ltd

  • Controlling Dust and Bioaerosols at a Biosolids Composting Faclity

    Studies at enclosed Longmont, Colorado project evaluate exposure level of employees. Operational changes reduce dust, endotoxin and A. Fumigatus by 90 percent. WHEN dealing with public health issues and composting, attention has been predominantly focused on potential exposure from the release of Aspergillus fumigatus (A. fumigatus) from composting facilities. Numerous studies were conducted to ...


  • Prevent hospital acquired infections during construction projects

    The issue of hospital acquired infections is a serious problem. According to several sources, three to four million hospital-acquired infections occur annually, with up to 80,000 fatalities. The costs of these infections are estimated to be between $4 billion and $5 billion per year (Air-Treatment Systems for Controlling Hospital acquired Infections, HPAC Engineering, April 2, 2008).Healthcare ...

  • Pt. 1 - IN the MIX - Construction Safety and Gas Detection

    This is part one in a 4 part series to be posted over the next 4 weeks. "Pointers for Construction Safety & Health compliance" Rob Sant Technical Products Manager, Certified Air Safety, Vancouver Washington Threats to our workers health and safety are numerous; an often overlooked hazard is the quality of the air they breathe. Whether simple nuisance odors like ...


  • Workplace Monitoring: Who, What, When, Why, How?

    In my previous articles in this series for SHP readers, I have focussed on the need for current attitudes to general health and safety processes to change and emphasised the importance of regular monitoring. The best way to combat those ‘hidden killers’ and protect our workforces is to increase awareness of the benefits of regular monitoring and detection.  Employees then need to ...


    By Casella

  • Silver Membranes in Monitoring Respirable Crystalline Silica

    Crystalline silica, most commonly found in the form of quartz, is a basic component of the earth; it’s found in soil, sand granite, and other minerals. During many industrial processes, crystalline silica is released as particles that are 100 times smaller than beach sand.1 Due to their size, these mineral particles cannot easily be cleared by human lungs. Instead, they persist in the ...


    By Sterlitech Corporation

  • WHO report on diesel fumes puts sharp focus on need for effective monitoring

    The World Health Organisation this month reclassified the dangers of diesel exhaust fumes, upgrading the risk from probably carcinogenic to a definite cause of cancer. The WHO report is based on the findings of research on workers in high risk areas, and puts a sharp focus on the need for effective monitoring in industries such as mining, rail, transportation, construction, power generation and ...


    By Shawcity Limited

  • British American Tobacco Survey – Case Study

    Project Highlights Envirochem carried out environmental perimeter monitoring during the demolition of warehouses at the British American Tobacco site in Southampton. Airborne Dust, noise and vibration levels were all monitored using state of the art equipment. Project ...

  • Putting infection control into practice in the workplace

    Healthcare workers are, like patients, subject to illness from a variety of airborne pathogens common to hospital settings. This risk increases during construction and renovation, as these endeavors release dust as well as disease-inducing microbes into the surrounding environment. Since more than one in five workplace illnesses in private industry occur in a hospital setting , hospitals ...

  • Did You Know that GRIMM Measuring Stations are Equipped with Lufft Weather Sensors?

    Do you already know our system partner GRIMM Aerosol Technology? Their aerosol measuring systems are in use all over the world where the focus lies on inorganic and organic aerosols as well as greenhouse gase. In the following article we present you three spectacular applications in the deepest jungle, on a frosty mountain peak and in a busy metropolitan area… About GRIMM Aerosol Technik ...

  • ATEX: Blower Technology And Explosion Protection

    Aerzen Combines Effective Reactions With Preventive Measures As specialist in blower and compressor technology for conveying air and gaseous media, the AERZEN Ex-protection within different ATEX-zones is a part of day-to-day business. Combustible dust, spatial distribution, oxygen share, ignition source and the closed reservoir are components of a dust explosion and ...

  • Closures of mine a new challenge for Romania

    AbstractThe mining activity is one of the oldest activity in Romania, dating from the year 100 B.C. The gold and silver ores represented one of the riches of our country. In time the economic content of metals diminuend, and the ore mines become non profitable. Due to this situation the best option of the State was the closure and ecological rehabilitation of the mines.The steps for the ...


  • Innovative safety control

    Specialists of the LAMSYSTEMS Company implemented innovative approach providing protection efficiency of the microbiological safety cabinet class II NEOTERIC. Microbiological safety cabinets are used for operator, product, and environment protection when ...


    By Lamsystems

  • Why instrument hire makes occupational safety sense

    Background Decisions concerning the acquisition of occupational safety monitoring instrumentation are often made by operational staff that may not have visibility of the full financial implications of their choices. The following article will examine the factors affecting these decisions and explain why a strategic decision to hire instrumentation can deliver substantial and wide-ranging ...


    By Ashtead Technology Ltd

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you