construction vibration monitoring equipment Articles

  • Construction and Civil Infrastructures Monitoring Systems

    Civil infrastructures are usually monitored through its whole life cycle. SHM (Structural Health Monitoring) technologies enable the estimation of the structural state and detection of structural change that affects the performance of a structure. Two discriminating factors in SHM are the time-scale of the change (how quickly the state changes) and the severity of the change. These factors ...

  • Noise and vibration compliance management made simple

    Noise and vibration from large projects has the potential to cause nuisance in the community and trigger complaints. If not managed properly this can cause delays, increase project costs, and lead to litigation. Construction Sentinel Construction Sentinel is a web-based subscription service that provides everything you need to meet your ongoing noise and ...

  • Noise and vibration compliance management made simple

    Noise and vibration from large projects has the potential to cause nuisance in the community and trigger complaints. If not managed properly this can cause delays, increase project costs, and lead to litigation. Construction Sentinel Construction Sentinel is a web-based subscription service that provides everything you need to meet your ongoing noise and ...

  • Noise and vibration compliance management made simple

    Noise and vibration from large projects has the potential to cause nuisance in the community and trigger complaints. If not managed properly this can cause delays, increase project costs, and lead to litigation. Construction Sentinel Construction Sentinel is a web-based subscription service that provides everything you need to meet your ongoing noise and ...

  • Safeguarding neighbours from construction noise

    The project to modernise Twickenham railway station would affect residential properties standing only a few feet away from the station. Over the past few years, regular improvement works on the tracks have caused disturbance to residents, who already live with high background noise, and the area has a history of frequent noise complaints.  The authority wanted to make sure that ...

  • Marine Monitoring to Maximise the Performance of Marine Machinery

    Considering the cost of putting to sea, it is well worth investing in vibration monitoring equipment that can help engineers to protect and maximise the performance of marine machinery. Here, we discuss the challenges facing engineers and offers advice on how to successfully install and use vibration sensing equipment on marine vessels. As machinery has become more complex and mankind has ...


    By Hansford Sensors

  • Case Study: Glastonbury Festival - Noise Monitoring At Glastonbury Festival

    In 1970, an entrance fee of just 1.00 would have permitted you, and about another 1500 'free spirits' to enjoy a weekend of listening to the likes of Quintessence, Marc Bolan and T-Rex, while at the same time savouring the undoubted 'delights' of free raw milk!! Almost three decades later, and at slightly greater expense, you and over 100,000 other people can now enjoy the delights and unique ...

  • British American Tobacco Survey – Case Study

    Project Highlights Envirochem carried out environmental perimeter monitoring during the demolition of warehouses at the British American Tobacco site in Southampton. Airborne Dust, noise and vibration levels were all monitored using state of the art equipment. Project ...

  • Interview with John O`Higgins, chief executive of Spectris

    Environmental issues - a growing concern among organisations Presently, organisations are seriously contemplating environmental issues and are taking necessary steps towards improving their products and processes. Large companies are now focusing on reducing their carbon footprint and ensuring that their products are environment-friendly. Even in niche segments, organisations are ...

  • Multilevel Systems

    Untitled Document Introduction A multilevel system is a groundwater monitoring device which allows ...


    By Solinst Canada Ltd.

  • Amassing Wind Information

    Wind is a variable resource, but not an indecipherable one. Second Wind encourages harnessing the full range of wind sensing technologies that are available today. When it comes to wind information, much attention is focused on the choice of wind measurement technology and data collection practices in wind resource assessment and project design. Right now, wind data plays a limited role in the ...


  • Brüel & Kjær accelerometers - 65 years of excellence

    The Thirties Already before the two young engineers Per V. Brüel and Viggo Kjær graduated as Masters of Electrical Engineering in 1939, they had decided to start a company together. However, they felt it was necessary to learn more and get some practical experience before actually going ahead, so P.V. Brüel became assistant to professor P.O. Pedersen in the newly created ...

  • Measuring Road Traffic Noise

    As part of an overall measurement programme to monitor road traffic noise in Århus (Denmarks second largest city), the Local Authority set up a noise measurement station on one of the major approach roads to Århus Harbour. This noise measurement station continually measures noise levels and can give a round-the-clock picture of noise level variations. Like most other districts, Århus Local ...

  • Gas cell selection for analysis of electronic gases

    APIMS and FTIR remain the preferred analytical tools for monitoring impurities in the electronic  specialty gases used by the semiconductor industry, although other tools such as CRDS are currently finding application in selected cases. FTIR spectroscopy offers the advantage of the simultaneous measurement of all gaseous species that exhibit dipole moment changes during vibrations at ...


    By CIC Photonics, Inc.

  • Multilevel Groundwater Assessment of Confining Unit in a Bedrock Sequence near Sarnia, Ontario

    Untitled Document INTRODUCTION Two sites in southern Ontario were studied through instrumentation ...


    By Solinst Canada Ltd.

  • Controlling Stack Emissions in the Wood Products Industry

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...


  • Typical process weighing applications

    Process weighing relates to the weighing of a powder material as part of a production process. The technology includes continually monitoring a material in a silo, discharging material by weight or rate, or even weighing products on the move. This article gives an overview of most of the typical process weighing applications that are used in all sorts of industries: level or inventory measuring ...


    By Hardy Process Solutions

  • Catalytic Oxidizers…What You Should Know.

    Within the U.S., depending upon specific plant operations, geographic locations, etc.,  many companies concerned with controlling VOC emissions have been operating air pollution control systems for years.  However, due to business expansion, plant modifications or recent changes in EPA guidelines, an increasing number of companies are now finding it necessary to install new emission control ...


    By The CMM Group, LLC

  • Wastewater Treatment in Turbo Mode

    Sulzer turbocompressors type ABS HST are successful in wastewater treatment. Today, 2000 units are installed around the world—for example, in municipal plants like in the city of Sögel, Germany. Here, the turbocompressors not only reduced the operating costs but also helped the plant to cope with load fluctuations. The secret behind this success is an advanced design with proven ...


    By Sulzer

  • High-strength wastes boost biogas production

    Water and wastewater treatment plants (WWTP) are significant consumers of energy. The U.S. Environmental Protection Agency estimates the industry uses the equivalent of 56 billion kilowatt hours (kWh) of electricity, representing three percent of the nation’s energy consumption, and is responsible for creating 45 million tons of greenhouse gas emissions each year. Energy intensive processes, such ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you