construction waste reduction Articles

  • Construction Waste Recycling

    Construction Waste Recycling,Construction Waste Plant | Machine Construction waste recycling and demolition materials produced at a construction location are increasingly significant. The environmental advantage of recycling can be considerable. A great deal of this energy savings result from reduced utilization of natural ...


  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • Halving construction waste to landfill by 2012

    Government and industry have proposed halving the amount of construction,demolition and excavation waste sent tolandfill by 2012 (“1/2W2L”), as a result of waste reduction, reuse and recycling. How might this be achieved and what will the impact be? Policy targetsIn England, the Government’s Waste Strategy and draft Sustainable Construction Strategy both propose the target of 1/2W2L. ...

  • Major waste reduction and recycling success for Severn Trent

    Severn Trent Water have made significant progress in their drive to reduce waste to landfill volumes and increase recycling through the introduction of a processing plant from County Tyrone company, CDE Ireland.The plant, which is provided to Severn Trent Water on a rental contract by Biffa is processing a variety of waste materials and since it has been introduced Severn Trent Water have seen a ...


    By CDEnviro

  • Waste Minimisation and Recycling: Fletcher Construction Australia

    A test project involving simple, practical waste minimisation and recycling measures, has helped Fletcher Construction cut its waste removal cost by more than half. The measures did not involve any capital cost, but they have resulted in substantial savings to both the company and the environment: savings of 55% were achieved on waste removal costs through recycling and input reduction, which ...


  • Waste quantification models for estimation of construction and demolition waste generation: a review

    Quantification is crucial for construction and demolition waste management. Accurate estimation can be satisfied by developing waste quantification model that is applicable for regional or nation–wide C&D waste generation. This paper presents a review on quantification models for C&D waste from literatures and how they correlate. Most studies combine the empirical waste assessment data or waste ...


    By Inderscience Publishers

  • Reduction of Waste from Synthetic Rubber Testing and Unreacted Styrene: Kemcor Australia

     Kemcor Australia has used cleaner production processes to reduce waste from synthetic rubber testing and unreacted styrene in small batch production, with significant cost savings. Background Kemcor Australia is a leader in the production of olefins, poly-olefins and synthetic rubber, and is part of the Altona (Victoria) chemical complex, the largest centre for primary ...


  • Major waste reduction & recycling success for severn trent water

    Severn Trent Water have made significant progress in their drive to reduce waste to landfill volumes and increase recycling through the introduction of a processing plant from County Tyrone company, CDE Ireland. The plant, which is provided to Severn Trent Water on a rental contract by Biffa is processing a variety of waste materials and since it has been introduced Severn Trent Water have seen a ...


    By CDEnviro

  • Evaluation of construction waste in Xanxerê: possibilities for a more sustainable end

    This research aims to study new strategies of reduction and destination of construction waste, as well as acknowledge what is being done with the waste produced in the city of Xanxerê, Santa Catarina, in order to propose actions for a better destination of the waste. In order to do so a field research was carried out, with the use of a supporting questionnaire, interviewing authorities, ...


    By Inderscience Publishers

  • Size reduction of substitute combustibles (RDF)

    The new pilot installation of SITA Wiebe GmbH, Bielefeld/Germany, processes highly calorific commercial and industrial waste to become quality-assured substitute combustibles for cement industry and/or power plants. Basic items of this ultra-modern processing installation are two one-shaft size reduction machines of type WLK 30 Super-Jumbo of WEIMA Maschinenbau GmbH, Ilsfeld. The total output of ...


  • Size-reduction of thermoplastics reinforced by long and continuous filaments

    Material utilization of thermoplastics reinforced by long and continuous filaments to produce high-value, long-filament reinforced extrusion components requires a gentle size-reduction of the materials to be utilized into lumps of grinding stock in order to achieve a large as possible filament length. The properties of the components to be produced out of this grinding stock are determined by the ...


  • Building a lower carbon construction industry

    Dominic Burbidge, Senior Client Manager Carbon Trust Advisory takes a cradle-to-grave view of the construction sector value chain Carbon reduction is a complex challenge for all organisations, not least those in the construction industry. Taking a cradle-to-grave view of the construction sector value chain means considering all aspects of the design, construction, use and demolition of ...


    By Carbon Trust

  • Environmental impact of higher recycled content in construction projects

    Construction clients, policy bodies and planning authorities are increasingly setting requirements for projects to measure and increase reused and recycled content. They are asking project teams to adopt the most significant opportunities for cost-neutral good practice within the chosen design, by identifying the top 5-10 substitutions specific to the project where one product can be replaced by ...

  • Fuel a small part of construction`s greenhouse impact

    The best way for Canadian construction to reduce its energy consumption will not necessarily be found in how it powers its work, says a leading energy research analyst. "The energy consumed in construction products is 35 to 40 per cent of the grand total of energy consumed in Canada. The ‘stuff’ that construction needs to make 'stuff is energy intensive," said John Nyboer, executive ...

  • Simple Separation: Diverting Wood And Cardboard at Construction Sites

    Diverting Wood And Cardboard At Construction Sites Residential home construction in Wisconsin generates 128,000 tons of residuals annually, according to a 1998 study by Camp, Dresser & McKee. Ten builders are participating in a project to demonstrate how easily major components of this waste stream can be recycled. The Metropolitan Builders Association (MBA) of Greater Milwaukee, the ...


    By BioCycle Magazine

  • Management of Hazardous Wastes

    ' Management of hazardous waste is a growing concern in many countries. The long-term impacts and costs of improper disposal can be very high and the emphasis must be on prevention. A comprehensive management system should include (i) policies, institutions and effective regulations and (ii) adequate and acceptable disposal facilities (either public or private). This note outlines the key ...


    By The World Bank

  • Mixed waste composting trends

    It's been about 25 years since vendors started marketing systems to process mixed municipal solid waste via composting in the U.S. Today, there are 13 plants, most fulfilling their niche in the communities they serve - whether managing MSW in high tourism areas, or processing residual organics from materials recovery facilities. Table 1 provides summary data on the 13 facilities. While we did not ...


    By BioCycle Magazine

  • Turning waste into power

    Economic, social and environmental factors dictate the necessity to manage waste to a new level. Wastewater plants, landfills, farms and food plants are all the owners of biomass that can be digested to produce biogas and turned into power. Biogas can be burned directly in boilers for heat recovery and used for manufacturing, heating or cooling; this is the simplest method of direct biogas ...


    By Hurll Nu-Way

  • Chrome plating process achieves cost reduction through zero liquid discharge - Case Study

    A global manufacturer of automotive components was faced with rising costs related to waste disposal from a Chrome plating process used in a plant in Poland. The plant manufactures shock absorbers for passenger vehicles. The plating of the shocks adds corrosion resistance, increased surface hardness, and improves cleaning ability and overall appearance. Project Goals: ...


    By PRAB, Inc

  • Waste Recycling Plant, Recycling Plant

      Waste Recycling Plant,Recycling Plant The present construction waste recycling already have some technical basis, regardless with the laboratory research or market applications have certain results. Shibang ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you