container press Articles

  • Strategically located balers reduce internal transports - Case study

    ABB Cewe-Control, a business unit within ABB, has 500 employees and a large production facility. Most components are delivered in boxes, resulting in daily accumulation of large amounts of cardboard. It is challenging and places high demands on handling used packaging material in a safe and cost effective way. Before three small dumpsters were placed indoors and a press container provided low ...


    By Orwak AB

  • Optimised material flow management – Start the presses - Case Study

    To provide the best light for people and the environment is the aim of Zumtobel Lighting GmbH. Established more than 60 years ago, the company from Dornbirn in Austria develops and manufactures high quality, individual lighting solutions for customers all over the world. The sustainable use of resources is an important factor for the company, not only with regard to its products, but throughout ...


    By HSM GmbH + Co. KG

  • Glass Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Tanzanian grass (hay) report on shredding and briquetting tests case study

    Date: 02.04.2011 Place: ASKET, Biomass Division in Gniewkowie Tested material: grass from Tanzania, rice husks, grass moisture content 12% 14% Technology: briquetting set BIOMASSER® SOLO-SET: shredder RK 7,5 kW, screen 15 mm, standard blades briquetting press BIOMASSER® SOLO type BS06 ...


    By ASKET

  • Red mud filtration - case study

    YEAR: 2010 COUNTRY: HUNGARY N° and MACHINERY MODEL EMPLOYED: 1 GHT 1500.P7 MEM Diemme® Filtration This company had to deal with ‘red mud’ disposal, coming from the Bayer Process of alumina production. The material is potentially very dangerous for the environment and the health of people living in close ...


    By Aqseptence Group GmbH

  • Easy baling of extra large cardboard - Case Study

    Whenever genuine spare parts are needed for the vehicles made by large automobile manufacturers, the Rudolph Logistik Group in Baunatal, near Kassel/Germany, ensures they are available. Their spare parts logistics is an ingenious operation! This is now also true of the way they deal with the huge amount of waste cardboard generated. The contract logistics specialists found an optimal disposal ...


    By HSM GmbH + Co. KG

  • B&C Nano Blog Post Quoted By Bloomberg BNA Daily Environment Report in the Article “9th Circuit Ruling Could Slow EPA Nanomaterial Conditional Registrations”

    On June 7, 2017, the Bloomberg BNA Daily Environment Report quoted “Appellate Court Vacates Conditional Nanosilver Registration” discussing the impacts of the recent 9th Circuit Court ruling. In a May 31 blog post, the law firm Bergeson & Campbell P.C., which represents industry clients, says the ruling could prompt the nano industry to press EPA to revisit its position that ...


    By Bergeson & Campbell, P.C.

  • France Bans Titanium Dioxide Food Additive Beginning in 2020

    On April 17, 2019, the Ministry of Ecological and Solidarity Transition issued a press release announcing that France will prohibit foods containing food additive E171 (titanium dioxide) from being placed on the market beginning January 1, 2020. The press release cites the April 15, 2019, opinion from the Agence nationale de sécurité sanitaire de l’alimentation, de ...


    By Bergeson & Campbell, P.C.

  • Rotary batch mixer yields high-quality blends for powder metallurgy

    GKN Sinter Metals Inc. is the world's largest manufacturer of parts made by powder metallurgy, a molding process that produces complex shapes with a range of properties. Powder metallurgy offers benefits in part fabrication over competing metal processes. It is faster than forging or casting and permits the use of more performance-enhancing alloys than die-casting. GKN Sinter Metals, Auburn ...

  • Corn Germ Oil Press Machine

    The correct installation method of corn oil extraction process: Before installing the equipment, the newly purchased corn oil extraction machine should be cleaned thoroughly. Remove the spindle and the cage, and polish the outer surface, inner surface and screw feeder of the screw with the abrasive cloth. All lubrication parts shall be lubricated with grease, and the type and brand of the ...

  • Document shredding as an economic mainstay for workshops for the disabled - Case Study

    Secure document shredding Document shredding is an important economic mainstay for the workshops for disabled persons at Lammetal Werkstätten GmbH. Now the company can continue to expand this service area with a “social commitment” thanks to two high performance shredders from HSM in Frickingen at Lake Constance / Germany. The Lammetal workshops could be ...


    By HSM GmbH + Co. KG

  • Maize (corn) straw report on shredding and briquetting tests case study

    Date: 28.04.2012 Place: ASKET, Biomass Division in Gniewkowo Tested material: maize straw, loose, moisture content 13% Technology: briquetting set BIOMASSER® DUO-SET: shredder TOMASSER® RK 7,5 kW, screen 15 mm, blades RB briquetting press BIOMASSER® DUO type BS210. ...


    By ASKET

  • A study on PbO in CRT funnel glass at high–temperature condition

    Glasses from the end–of–life Cathode Ray Tubes (CRTs) represent a pressing environmental problem, especially the funnel glass containing high lead concentration. To avoid lead contamination and re–utilise it, it is of great importance to study the separation process of lead contained in the funnel glass. In this study, the microstructure of scrap funnel glass and molten funnel glass were analysed ...


    By Inderscience Publishers

  • Corn Germ Oil Press Machine

    The correct installation method of corn oil extraction process: Before installing the equipment, the newly purchased corn oil extraction machine should be cleaned thoroughly. Remove the spindle and the cage, and polish the outer surface, inner surface and screw feeder of the screw with the abrasive cloth. All lubrication parts shall be lubricated with grease, and the type and brand of the ...

  • Corn Germ Oil Press Machine

    The correct installation method of corn oil extraction process: Before installing the equipment, the newly purchased corn oil extraction machine should be cleaned thoroughly. Remove the spindle and the cage, and polish the outer surface, inner surface and screw feeder of the screw with the abrasive cloth. All lubrication parts shall be lubricated with grease, and the type and brand of the ...

  • Corn Germ Oil Press Machine

    The correct installation method of corn oil extraction process:Before installing the equipment, the newly purchased corn oil extraction machine should be cleaned thoroughly. Remove the spindle and the cage, and polish the outer surface, inner surface and screw feeder of the screw with the abrasive cloth. All lubrication parts shall be lubricated with grease, and the type and brand of the ...

  • Disposal solution for the mail-order business - Case Study

    Channelled flow of cardboard Carpenters, forestry workers or road construction workers looking for hard-wearing but modern work clothes come to the right address at engelbert strauss. This familyowned business in Biebergemünd now belongs to Europe’s leading mail-order companies for work clothes. They deal with countless customer orders and deliveries, as well as a flow of ...


    By HSM GmbH + Co. KG

  • Rice straw report on shredding and briquetting tests case study

    Date: 29.06.2011 Place: ASKET, Poznañ Tested material: rice straw from Egypt Technology: briquetting set BIOMASSER® SOLO-SET: shredder RK 7,5kW, screen 15 mm, standard blades briquetting press BIOMASSER® SOLO type BS06. Shredding Rice straw ...


    By ASKET

  • Jail waste streams provide unusual challenges to typical industry equipment

    Arlat ‘TS’ Filter Screen proves itself equal to the challenge. Unusually high volume of solids and the wide variety of materials in waste streams from correctional institutions provide unique challenges to today’s typical wastewater equipment. In recent years, the state of Virginia has installed five ARLAT ‘TS’ Filter Screens in correctional institutions. They use the screens to remove ...

  • EPA issues notice for external peer review draft of recommended toxicity equivalency factors (TEF) for dioxin and

    the U.S. Environmental Protection Agency (EPA) announced plans to convene an independent panel of experts to organize and conduct an external peer review meeting to review the draft document titled “Recommended Toxicity Equivalency Factors (TEFs) for Human Health Risk Assessments of Dioxin and Dioxin-Like Compounds.” 74 Fed. Reg. 53233. The peer review meeting took place by teleconference on ...


    By Bergeson & Campbell, P.C.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you