container weighing Articles

  • The StyroPress styrofoam densification test results - Case Study

    Two months ago a StyroPress styrofoam densifier was installed at a furniture company in Arizona. This unit has been monitored closely and we are now able to provide you with some of the results. This StyroPress EPS briquette system has now been compacting and densifying styrofoam for a couple of months. Feel free to contact us for the user and contact information should you have any questions of ...

  • Recommendations for Implementing a Calibration Program

    Introduction This article is limited to the principles of organization for calibration work in relation to cGMP and other pharmaceutical standards. Calibration and metrology methods related to actual calibration techniques, statistics, and theories are not explored in our discussions.1 Each class of instruments requires specific techniques and approaches to achieve stated accuracies. All ...


    By Prime Technologies, Inc.

  • Weighing Solutions for Agricultural Farmers

    PT Limited load cells are popular in the agricultural industry. Shear beam load cells are often used in feed out systems and are found under the tray or deck of trailers. They’re used to monitor the amount of feed being deposited for stock. Shear beams are also used in similar designs for fertilizer spreaders. ...


    By PT Limited

  • Specification and calibration requirements for industrial scales in pharmaceutical applications

    Introduction Performance and accuracy of industrial scales in pharmaceutical applications are covered by current Good Manufacturing Practices (cGMPs). Verification of proper operation of process scales is an important factor in finished product Quality Assurance (QA) programs. Incorrect weighing, additions of materials and components in validated processes of formulation, dispensing, and ...


    By Prime Technologies, Inc.

  • Genevac EZ2 Elite Evaporator and Powder Handling Suite

    Flow Sciences, Inc. was tasked with designing a modular containment unit that would house a Genevac EZ2 Elite Evaporator and allow for transfer of materials post-manipulation into a separate, connected balance enclosure for weighing. The Genevac equipment required a level, sturdy work surface ...


    By Flow Sciences Inc

  • Intensified ribbon blending of melamine compounds cuts cycle times 25% for furniture molder

    Melsur Corporation, the world's leading supplier of hard plastic melamine school furniture, molds components from a mixture of resin, wood flour and pigments. Each of the 32 color variations, 30 products and custom designs must be blended individually, a process that can take up to four hours, depending on product. Anything less than empirically defined cycle times alters the final color and ...

  • Siberian mining camp - Case study

    A Siberian gold mining operation required a sewage treatment system that met the following requirements: Able to withstand up to -70° Celsius (-94° F) Temperatures Able to withstand 100 mph winds Contained in 20’ C-Cans C-Can must not weigh more than 10 metric tonnes Containers must be sea-worthy System must be scalable, starting at a ...


    By Nomadic Systems Inc.

  • Takeda Pharma GmbH, Germany - Case Study

    “Takeda Pharma GmbH is controlling more than 30000 containers per year. NIR allows to save time without loosing safety.” Customer name Mr. Armin Groh, Laboratory Manager Quality Control Company / Institution Takeda Pharma GmbH, Germany Product lines ...


    By BÜCHI Labortechnik AG

  • What can I use to filter my mobile phase?

    If you are using mobile phase that contains salts or, generally, any components that are weighed out for its preparation, you will need to filter the solution before using with HPLC or UHPLC. The most common type of filtration is membrane microfiltration. We sell an extensive group of products for this and they are discussed very well in a blog ...


    By Restek Corporation

  • Choosing a Human Cremation System

    Human cremation is not at the top of most people’s conversation starters and unless people have experienced bereavement they probably don’t give the process a thought. It is a fact that some councils are running out of space for burials in urban cemeteries so ...


    By Inciner8 Limited

  • TopAir’s Weighing Station

    TopAir is the flagship brand of Statitech Ltd., an ISO 9002 certified manufacturer of cleanroom products for the electronic, semi-conductor, biomedical and defense industries. Established in 1999 and ISO-9002 certified, Statitech Ltd. specializes in the development, production and marketing of a wide variety of standard and custom-made cleanroom products including a weighing station, and has ...


    By TopAir Systems

  • Evaluation of Nature’s Broom Plus for remediation of used motor oil and hydraulic fluid - Case study

    Summary: In a nine week study, a bio-based oil absorbent, Nature's Broom Plus, was evaluated for its ability to stimulate the degradation of petroleum products in used motor oil and hydraulic fluid. There were three treatments: 1) controls containing only Nature's Broom Plus and de-ionized water, 2) Nature's Broom Plus contaminated with - 20,000 ppm of Havoline motor oil and de-ionized ...


    By Nature`s Broom, Inc.

  • Secondary Oil Containment at US Army Corps of Engineers - Big Bend Dam - Case Study

    Big Bend Dam takes its name from the unique bend in the Missouri River seven miles upstream from the dam. Construction of the dam began in 1959 and the embankment was completed in July 1963. Big Bend dam is 95 feet (29 m) high and 10,570 feet (3,220 m) in length. Power generation began at the facility in 1964 and the entire complex was completed by 1966. The hydroelectric plant generates ...


    By Albarrie Canada Limited

  • Tracking Air Pollution with Mini Micro Pulse LiDAR - Case Study

    Portable Monitoring Solution Offers Valuable Insight Into Haze Problem Poor air quality in large urban population centers has a negative impact on health and quality of life. To address these issues, the Institute of Urban Meteorology (IUM) in Beijing, China, is conducting fundamental research to better understand, forecast and mitigate atmospheric haze, i.e., air pollution. Over the past ...

  • Automated Methanol Extraction of High-Level Soil Samples Using the Teledyne Tekmar Atomx XYZ and Agilent 7890B GC/5977A MSD

    Abstract US EPA Method 5035 was used to determine the concentration of volatile organic compounds (VOCs) in high-level soil samples using purge and trap concentration. For this study, a Teledyne Tekmar Atomx XYZ purge and trap (P&T) system and Agilent 7890B Gas Chromatograph (GC)/5977A Mass Spectrometer (MS) was used to generate a working linear calibration curve, method detection limits ...


    By Teledyne Tekmar

  • Typical process weighing applications

    Process weighing relates to the weighing of a powder material as part of a production process. The technology includes continually monitoring a material in a silo, discharging material by weight or rate, or even weighing products on the move. This article gives an overview of most of the typical process weighing applications that are used in all sorts of industries: level or inventory measuring ...


    By Hardy Process Solutions

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you