containment enclosure Articles

  • Technical brief - FR standards for weather protection & containment enclosures

    Introduction The worldwide market for temporary enclosures has steadily increased over the last two decades as facility owners, engineers and contractors recognise the safety benefits and cost-effectiveness of installing temporary enclosures. Apart from minimising weather-induced delays to a project, scaffold sheeting enhances site safety by preventing debris and small objects from falling ...

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Why You Need to Monitor Dumpster Enclosures

    Everyone has seen a small bag of garbage or a piece of trash sitting right next to a dumpster, and you have probably thought, “Why couldn’t they have just put it into the dumpster?” People shy away from using dumpsters with dirty lids, broken handles, or a general mess around them. All the hand sanitizer in the world could not make them want to operate a filthy ...


    By DJProducts, Inc.

  • TIGG Activated Carbon Box Adsorbers Contain VOCs at MGP Site

    Tasked with the excavation, removal and solidification of soil containing coal-tar by-products generated by a former manufactured gas plant in New York, an experienced environmental remediation firm decided to use a method that proved successful in previous projects. TIGG activated carbon box adsorbers were used to contain VOCs at the former MGP site undergoing environmental remediation. By ...


    By TIGG, LLC

  • Flame Retardant Protection - Scaffold Sheeting

    Powerclad FR is a range of Flame Retardant versatile and cost-effective scaffold sheeting and open mesh products for temporary containment and weather protection enclosures. Our systems provide an unparalleled choice of materials to encapsulate a project, providing solutions to weather induced delays, enhancing site safety and security, minimising ...

  • Safety Monitoring in HF Alkylation Units

    How GasFinder works Boreal Laser’s GasFinder & GasFinder MC are open-path gas detectors that use an integrated transmitter/receiver unit and a remote, passive retro-reflector. In GasFinder (see below) the transceiver also houses the laser diode, drive electronics, detector module and micro-computer subsystems. The transceiver unit is contained in an IP65 enclosure and has connectors for power ...


    By Boreal Laser Inc.

  • H2S Safety in Sour Gas Operations

    How GasFinder works Boreal Laser’s GasFinder & GasFinder MC are open-path gas detectors that use an integrated transmitter/receiver unit and a remote, passive retro-reflector. In GasFinder (see below) the transceiver als o houses the laser diode, drive electronics, detector module and micro-computer subsystems. The transceiver unit is contained in an IP65 enclosure and has connectors for ...


    By Boreal Laser Inc.

  • Asbestos in Buildings: Practical Guidelines for Building Owners

    Practical guidelines for building owners Overview Friable asbestos-containing materials are present in many public and commercial buildings, schools and factories built before the mid-70's. Regulations in Ontario and some other provinces require building owners and property managers to put in place asbestos control programs, once they are aware of the presence of friable asbestos-containing ...


  • NivuFlow 750 - Transmitter with intuitive operation

    NivuFlow 750 is the successor to the well-known OCM Pro CF. The compact dimensions of the new transmitter allow to install the unit on DIN rails and in switching cabinets even under confined conditions. The connecting options using plug-in terminals on the transmitter front ensure quick and reliable wiring as well as to quickly exchange the transmitter without tools. The modern menu-based ...


    By NIVUS GmbH

  • Aerospace - Leading Aerospace manufacturing firm - case study

    Application The company designs and builds flight controls for aircraft and launch vehicles. Their product line includes thrust vector and steering controls for space vehicles as well as thruster valves, regulators and integrated manifolds for satellite propulsion. Manufacturing of most of these products requires either military spec plating or anodizing to ensure protection from extreme ...


  • VOC control efficiency compliance test case study

    Skyworks Solutions, Inc. (Skyworks) selected CK to perform a compliance emissions testing program to determine the control efficiency of a new Roto-Concentrator followed by a thermal oxidizer (RC/TOx) used to control volatile organic compounds/hazardous air pollutants (VOC/HAP) from multiple manufacturing processes. A facility air permit condition required compliance testing of the subject RC/TOx ...


    By CK Environmental, Inc.

  • Controoling chlorine costs

    The most widespread disinfectant used in the treatment of drinking water is chlorine, which can be applied in a variety of ways. History has taught us that, in bacteriological terms, chlorinating water is a proven way of disinfecting drinking water. After all, more than 75 years have passed since chlorine was used to disinfect drinking water for the first time. Many years of experience have shown ...


  • The Asbestos Management and Maintenance Program

    STEP ONE: ASSESSMENT AND SURVEYThe first step of the Asbestos Management Program is to do an asbestos survey to assess the location, identify the type of asbestos, the condition of the asbestos and identify a maintenance record. This asbestos inventory or assessment is usually carried out by an independent consulting firm. This assessment or survey will include: Identification and location of the ...


  • Continuous Oxygen Monitor Detects Leaks in Nitrogen Dewar Storage

    Extremely low maintenance oxygen (O2) monitor designed to continuously monitor confined spaces for low oxygen levels available from PureAire Oxygen Monitors. PureAire Oxygen Monitor is suitable in all environments containing nitrogen, helium, argon, or any cryogenic gases. PureAire is unaffected by temperature, humidity, barometric pressure, or any environmental changes. The instrument displays ...

  • Encoded photometric infrared spectroscopy

    General Principle The EP-IR system contains the encoder-spectrograph, as well as a real-time embedded micro-processor for signal analysis, data treatment, and Chemometrics (quantitative) analysis in a single small-footprint enclosure. Operation Principle An infrared polychromatic beam is emitted from an external source (e.g. glow bar) onto the sample. Then ...


    By CIC Photonics, Inc.

  • Case study - Canmaker achieves cost-effective compliance

    Overview JL Clark, headquartered in Rockford, Illinois, is no ordinary packager.  The company, celebrated its 110 year anniversary in 2014, is recognized around the world for its award winning metal lithography and exact graphic reproduction. Also recognized as a long-time positive corporate influence in the community, the management of the company was naturally concerned ...

  • RUGGED WIRELESS POINT-TO-POINT I/O NETWORK FOR REMOTE SENSING AND ACTUATION

    RUGGED WIRELESS POINT-TO-POINT I/O NETWORK FOR REMOTE SENSING AND ACTUATION SureCross DX70 from Banner Engineering provides robust and reliable RF communications A rugged, self-contained point-to-point wireless network that provides reliable configured I/O for remote sensing and actuation is available from Banner Engineering. The SureCross DX70 is designed for process and assembly/manufacturing ...


    By Banner Engineering Corp.

  • Drying plastic resin pellets in injection- Molding & Extrusion processes case study

    Application Moisture concentrations are measured in the dry purge air used to remove moisture from a hopper containing plastic resin pellets used in injection-molding and extrusion processes. Problem Moisture contaminates the plastic resin pellets causing several quality problems in the finished plastic products. Moisture causes clear ...

  • PCB clean-up on behalf of the United Nations

    The Environmental Services group of ABB won a contract from the United Nations (UNOPS) for the clean-up and of a PCB spill in Yugoslavia and for the disposal of the resulting PCB wastes. This project is the first clean-up of ...

  • Marine Monitoring to Maximise the Performance of Marine Machinery

    Considering the cost of putting to sea, it is well worth investing in vibration monitoring equipment that can help engineers to protect and maximise the performance of marine machinery. Here, we discuss the challenges facing engineers and offers advice on how to successfully install and use vibration sensing equipment on marine vessels. As machinery has become more complex and mankind has ...


    By Hansford Sensors

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you