containment technology Articles

  • The design and build of a process and wastewater treatment plant - Inlet: 900 mc/h - Case Study

    The client Ferrara Food, part of the S.F.I.R. group, is a company operating in the agro-industrial sector. More specifically Ferrara Food operates within the preserved food industry, specialising in tomato processing, from fresh product to semi-finished and finished products. Semi-finished products can be 200kg containers, or 1200kg bigbags, filled through an ...


    By IDRAFLOT

  • Understanding the 3 Types of Arsenic Removal Used for Wastewater

    With the onset of the Industrial Revolution and the development of internal combustion engines and new manufacturing technologies, fresh water became an essential raw material not only for production, but for cooling purposes in manufacturing processes. However, when fresh water is used in an industrial process, it creates industrial wastewater composed of a variety of chemicals and other raw ...

  • Advancements in Scaling Calculations and an in depth look at Antiscalant dosing for stressed waters and high recovery systems

    Abstract Over the past few decades the Reverse Osmosis (RO) industry has observed an increase in applications in challenging waters. Water sources that were never considered suitable for RO are now commonplace, including municipal waste streams, industrial waste, and even mining waste. Furthermore, regulatory restrictions, environmental obligations, solid waste expenses, and water supply ...


    By Avista Technologies

  • How a Specialized Automatic Control Valve Solved Flooding

    The Colombian area of Antioquia creates much of its clean power from hydropower plants along the Guadalupe River. The Guadalupe IV hydroelectric plant generates power with three vertical axis turbines that discharge water below the river level. To prevent flooding, however, the plant needed a solution that ensured the ejector ...


    By Singer Valve Inc.

  • Containment for Soil, Sediment, and Sludge

    Containment treatments are often performed to prevent, or significantly reduce, the migration of contaminants in soils or ground water. Containment is necessary whenever contaminated materials are to be buried or left in place at a site. In general, containment is performed when extensive subsurface contamination at a site precludes excavation and removal of wastes because of potential hazards, ...

  • Cost Containment: Beyond the Obvious

    Utilities today can implement a number of different initiatives to help them contain costs and maximize profits. Some of those, such as switching to a more efficient fuel source if possible, can produce obvious results that are relatively easy to calculate. But there are other initiatives, though less obvious, that can produce significant results at the bottom line. One such cost-containment ...

  • Spill Containment, Industrial & Environmental Solutions

    ULTRA-EVER DRY is a superhydrophobic (water) and oleophobic (hydrocarbons) coating that will completely repel almost any liquid. Ultratech EverDry uses proprietary nanotechnology to coat an object and create a barrier of air on its surface. This barrier repels water, oil and other liquids unlike any coating seen before. Technical Information:  ...


    By Interstate Products Inc

  • How To Avoid Penalties For Not Containing Spills

    "Chemical spills can cost your company millions of dollars not to mention the bad publicity that results from suffering a spill. Every business wants to avoid the possibility of an uncontained hazardous material spill if at all possible. To do this you need a spill containment system designed for the type of hazardous materials that your handle. Safe Drain ...

  • Geotube Containment and Dewatering technology was used to dispose of slurry waste from North River Mine - Case Study

    At the North River Mine in Berry, AL, two waste streams are created from the processing plant, coarse rock and fine rock particles. Coming from the processing plant, the fine rock particles are suspended in water forming a slurry. This slurry is normally disposed of via surface impoundments or injected into abandoned underground mine workings. The volume of this waste stream is very significant ...

  • Geotube Dewatering Technology contains and dewaters river sediments at large Water Treatment Plant in New Jersey - Case Study

    River sediments and filter backwash sludge are annually dredged and dewatered in Geotube containers for beneficial reuse. TenCate develops and produces materials that function to increase performance, reduce cost, and deliver measurable results by working with our customers to provide advanced solutions. And a unique high volume, low cost dewatering system from TenCate Geotube can ...

  • bucket molds china, pail mold, tub mold, painting container molds technology

    Bucket mould technical points A. How to avoid the bucket mould core eccentric, caused the bucket wall thickness not even? 1.optimal and equal cooling effects in different area of bucket mould cavity and ...


    By Focare Mould Co.,Ltd.

  • Analyzer underpins growth of container inspection company

    After a career as a customs officer in the Netherlands, Wim van Tienen was well aware of the toxic gas hazards presented by some freight containers, so in 2009 he started a company, Van Tienen Milieuadvies B.V., offering gas analysis and safety advice. The company grew quickly and now employs 23 staff. Wim attributes a large part of this success to the advanced FTIR gas detection and analysis ...


    By Gasmet Technologies Oy

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • Processing Wastewater Sludge Using Dewatering Containers

    The relative cost of dewatering equipment varies widely and is directly related to the processing rate. For smaller utilities that need to dewater sludge in batches, dewatering containers are an alternative that can be relatively inexpensive and simple when compared to other technologies on the market. The most common type of dewatering container is based on a roll-off box design, although any ...

  • Odor and Heat Contained Thanks to GTI Cover

    The Customer: A major American frozen food manufacturer with worldwide distribution. The Customer’s Needs: The frozen food manufacturer required a cover solution for its wastewater treatment system that would reliably contain odors and retain heat. The Solution: Geomembrane Technologies Inc. (GTI) designed, fabricated, ...

  • Buried Waste Containment - Soil Excavation, Emission Abatement

    Products & Equipment Used: Pneumatic Foam Unit 400/25 Bulk Storage & Dilution System (BSD) AC-645 Long Duration Foam AC-904 Long Duration Foam Application Summary: Uniroyal Chemical disposed of an extensive list of waste chemicals collected in unlined pits. This was normal before hazardous waste regulation in ...


    By Rusmar Inc.

  • Smurfit-Stone Container Corporation - Hopewell, VA

    Smurfit-Stone Container Corporation is one of the world’s largest manufacturers of packaging products ranging from consumer goods, printed displays and container board. The Hopewell, Virginia facility is dedicated to providing linerboard for corrugated container end products. Project DescriptionHPD was chosen to replace the existing three evaporator trains that were currently in ...

  • Continuous water recycling for reusable plastic containers

    Abstract The pilot study and full scale installation of UF-RO based System to recycle around 75% of wastewater from plastic pallet washing facility is described. The installed System had several issues that had to be resolved. Cooling tower was installed to cool water to below 85 o F. Ion exchange Systems were installed after the UF membranes to remove iron and silica. Multiple filtration ...

  • Containment for Ground Water, Surface Water, And Leachate

    Containment measures are often performed to prevent, or significantly reduce, the migration of contaminants in soils or ground water. Containment is necessary whenever contaminated materials are to be buried or left in place at a site. In general, containment is performed when extensive subsurface contamination at a site precludes excavation and removal of wastes because of potential hazards ...

  • SITE Technology Capsule - DARAMEND Bioremediation Technology

    GRACE Bioremediation Technologies’ DARAMENDTM Bioremediation Technology is an amendment-enhancedbioremediation technology for soils and sediments contaminated with a wide variety of organic contaminants includingchlorinated phenols, polynuclear aromatic hydrocarbons (PAHs) and petroleum hydrocarbons. The technology may be applied ex situ to sediment and soil and in situ to near-surface soils. The ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you