contaminated plastic washing Articles

  • Taylor made washing lines for wet recycling of conterminated plastics

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, located in Sinsheim/Germany manufactures and sells complete washing lines for the recycling of plastics waste. Prior to re-pelletizing the plastic waste must be size reduced, washed and if necessary foreign materials separated. NEUE HERBOLD washing lines, produce granules or flakes with a high quality even at today's ...

  • Tailor-made washing lines for wet recycling of conterminated plastics

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, located in Sinsheim/Germany manufactures and sells complete washing lines for the recycling of plastics waste. Prior to re-pelletizing the plastic waste must be size reduced, washed and if necessary foreign materials separated. ...

  • Decontamination of soil contaminated with petroleum grease

    Contamination modifies the engineering properties of soil, thereby restricting its further use either as a construction material or as a supporting medium. Due to the scarcity of land, it becomes imperative to reuse the land for infrastructure developmental activities. Out of numerous soil contaminants, automobile grease is one of the most prominent. Considering the cumulative impact of ...


    By Inderscience Publishers

  • Continuous water recycling for reusable plastic containers

    Abstract The pilot study and full scale installation of UF-RO based System to recycle around 75% of wastewater from plastic pallet washing facility is described. The installed System had several issues that had to be resolved. Cooling tower was installed to cool water to below 85 o F. Ion exchange Systems were installed after the UF membranes to remove iron and silica. Multiple filtration ...

  • Micro-plastics and the Specac Diamond Compression Cell

    The Environmental Audit Committee has called for a global ban on microbeads, minuscule plastic balls used by the cosmetic and cleaning industries for their abrasive properties (exfoliating face-wash, shower gel, toothpaste, etc). According to ...


    By Specac Limited

  • Suggested Practice for Remediation of Highly Infectious Biological Agent Contamination in Indoor Environments

    Untitled Document PURPOSE This suggested practice describes those basic procedures to be followed, and precautions ...

  • Unique sponge system contains water contaminants in storm drains

    Untitled Document SmartSponge technology captures oil and hydrocarbons from stormwater runoff, preventing its discharge into receiving waters. Water quality is being ...


    By Baum Publications Ltd.

  • A world first for plastic sorting thanks to TOMRA Sorting UK

    Overview In late 2010, ECO Plastics issued TOMRA Sorting UK (TOMRA) with one of the most demanding sorting challenges it had ever encountered. In order to supply a large independent bottler with recycled plastic for all its plastic packaging in the UK, ECO Plastics needed to provide a consistent supply of super-clean recycled PET (rPET) flakes to a level that had never been achieved before. ...


    By TOMRA Sorting (TITECH)

  • Plastics pellet manufacturer eliminates blend problems with uniquely designed rotary blender

    Having no internal moving elements, blender achieves 100% discharge eliminating process problems. To remain competitive in a widening world economy, manufacturers have to provide quality products at world market competitive prices. This has forced American manufacturers to rethink their approach to manufacturing. Particularly, rethink the cost effectiveness of their ...

  • Air pollution and odour control treatment plant of contaminated air during industrial drums and package remediation process

    Customer EuroVeneta Fusti srl is an italian market leader in industrial drums and package recovery, remediation and reuse. Sited in Triveneto, in Mira next to Venice, EuroVeneta Fusti operates old drums collection, processing, regeneration and new ratification of industrial packages (such as ...


    By F.G.M. engineering srl

  • Sorting of PET flake by material & color simultaneously at ECO Plastics, UK case study

    In late 2010, ECO Plastics issued TOMRA Sorting UK with one of the most demanding sorting challenges it had ever encountered. In order to supply a large independent bottler with recycled ...


    By TOMRA Sorting (TITECH)

  • The Magnetic Duo

    (From Resource Recycling) The combination of high gradient magnetic separation using rare earth roll magnets and eddy current separation has proved to reliably remove aluminum flakes mixed with PET. Recycling of plastic beverage containers made from polyethylene terephthalate (PET) has been a growth industry for the past two decades. Recycled PET can be used in such diverse products as ...

  • Pet Recycun6 Plant Opens in Germany

    German plastics recycling company TM Recycling has invested about €10 million ($13.4 million) to build a new PET plastics recycling facility. Construction of the plant is associated with the formation of PFR Nord GmbH in Hohenwestedt TM Recycling, along with AFA Nord GmbH, are a part of the German company Mensing Group, headquartered in Germany. The facility has been operating since June ...

  • Turnkey solution for Gaskell Bros

    Gaskell Bros, based at Winwick near Warrington, have experience in both the quarrying and recycling sectors. Their site, originally a quarry, is now used for landfill and recycling.The majority of material brought in is building, demolition, and public service waste from the surrounding Liverpool, Manchester, and Leigh areas. Gaskell directors Mike Broad and Mark Gaskell saw an opportunity for ...


    By CDEnviro

  • Industrial container recycling simplified by oil skimmer

    Barrel Reconditioning Industries (BRI) of Cottage Grove, MN builds recycling systems for both metal and plastic containers, including lubricating fluid drums and barrels. A typical BRI system consists of several integrated machines or stations, including a solvent preflush and a high pressure water wash. The water wash presents two distinct problems. First, oil and grease contaminated wash water ...


    By Abanaki Corporation

  • Latest CDE plant installed in Trinidad

    In November 2006 a CDE Sand Washing Plant was installed with the Sampete Group based in Wallerfield Armia, Trinidad. Before this installation the raw material had been stockpiled as waste, compromising the efficiency of several limestone quarries in the east. It provided a considerable challenge for traditional systems as it is overburden mixed with clay-bound material which is extremely plastic ...


    By CDEnviro

  • Extraction of many emission sources in extensive factory premises - Case Study

    Example: Packaging Similar tasks: Coating, Automobile industry, paint production Different production processes lead to decentralised ventilation of emission sources. These decentralised ventilations are consolidated within a central air pollution control system. A producer of plastic, cardboard and composite material packages uses a range of printing units, laminating machines ...

  • Regeneration of used oil

    Used oil regeneration technologies Over time, oil accumulates oxidation products, contaminants and impurities which drastically reduce its quality. Contaminated oil can no longer meet quality requirements and must be changed. Waste oil is collected and regenerated to retain valuable basic materials. Oil cannot be recycled at petroleum processing plants with ...


    By GlobeCore GmbH

  • A Citizen`s Guide to Chemical Dehalogenation

    What is chemical dehalogenation? Chemical dehalogenation is a chemical process to remove halogens (usually chlorine) from a chemical contaminant, rendering it less hazardous. Halogens are a class of chemical elements that include chlorine, bromine, iodine, and fluorine. Polychlorinated biphenyls are halogenated compounds that once were used in high voltage electrical transformers because they ...

  • Case study - Nottinghamshire Recycling

    DUO Equipment delivered and installed a new full washing and water management plant for Nottinghamshire Recycling Ltd (NRL). Based in Worksop, Nottinghamshire, NRL is a sustainable waste solution provider processing C & D waste, green waste, wood and recycled aggregates. The new washing and water management plant (which includes a Gennaretti centrifuge system) will provide NRL with the ...


    By DUO (Europe) plc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you