continuous emissions gas monitoring Articles

  • What is the Difference between a gas analyser and a gas monitor?

    Technically, there does not have to be any difference at all. However, semantically, “analysis” might suggest something more scientific with higher precision and better performance than a simple “monitor” which possibly suggests a more indicative output where precision is of less importance. With that said, the two words “analyser” and “monitor” are ...


    By Opsis AB

  • Who Needs Continuous Emissions Monitoring?

    Continuous emissions monitoring (CEM) is about monitoring air pollutants generated by a specific activity and emitted to the ambient air, typically through a tall stack or other exhaust pipe. The “activity” can be some industrial process like a power plant or a waste incinerator, but it can also be on a much smaller scale such as a car equipped with an internal-combustion engine. ...


    By Opsis AB

  • Compliance to standards in continuous emissions monitoring case study

    Customer: Glass Manufacturer Application: Continuous Emissions Monitoring Service (CEMS) for Glass Manufacturing Background: A glass factory is required to ...


    By Ecotech Pty Ltd

  • In-situ continuous emissions monitoring & regulatory compliance

    As environmental scrutiny has risen and regulation has tightened in recent years, the importance of having accurate information on the environmental performance of your power plant has increased. After all, if you want to manage something, you need to be able to measure it. The analogy is obvious; you wouldn't start a diet without first investing in a set of scales. So it is with Continuous ...

  • Technical Challenges of Continuous Mercury Emissions Monitoring

    Many pollutants such as CO2, NOx and SO2 have been monitored continuously already for decades. In the last years the awareness for the need to measure mercury has also grown, and continuous mercury monitoring is becoming more and more relevant. Especially industries burning coal, oil or waste, share the responsibility to monitor their mercury emissions. All measuring techniques need to be able to ...


    By Gasmet Technologies Oy

  • Hydrogen Sulfide Continuous Emission Monitoring of Odor Control Systems

    ABSTRACT This paper discusses the use of the Sycamore Continuous Emissions Monitor (CEM) for monitoring Hydrogen Sulfide Gas concentrations within odor control systems. The CEM is configurable as a single, two or three point system and can measure from 5 ppb to 2 PPM, 0.1 – 20 PPM, and 0 – 200 PPM and is designed for monitoring of scrubbers, carbon adsorbers, biofilters and biotrickling ...

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • Veolia EAU - Continuous monitoring of odor and target gas emissions at a WWTP, with the RQ Box solution case study

    The site Wastewater treatment plant Aquapôle, located in Isère, France Operated by Société Dauphinoise d’Assainissement (SDA) Capacity of 500 000 population equivalent ISO 14001 approach Challenges To define a zero point for the odor footprint of the site in order to ...


    By Alpha MOS Environment

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • How to Monitor Mercury Emissions

    In recent years, mercury levels in the environment and in the food chain have risen substantially mainly due to human activities. As a long-range pollutant it can affect areas located thousands of kilometers away from its original source of emission. It’s no wonder then that the regulatory pressure to monitor mercury emissions grows stronger.  Before diving ...


    By Gasmet Technologies Oy

  • Laser gas detector systems for greenhouse gas emissions monitoring

    Two types of portable laser based gas detector for measuring emissions of the greenhouse gases carbon dioxide (CO2) and methane (CH4) from oil and gas operations are described. A scanning open path detector was developed within a Cooperative Research and Development Agreement (CRADA) with the USEPA. This system scans multiple paths across an area source in rapid succession, enabling calculation ...


    By Boreal Laser Inc.

  • Continuous Mercury Monitoring Benefits Cement Plants

    Antti Heikkilä from Gasmet Technologies highlights the challenges faced by mercury monitoring in cement kilns, and explains how a new continuous mercury monitoring system addresses these issues and provides process operators with an opportunity to improve environmental performance and demonstrate compliance with forthcoming legislation. Background The production of cement ...


    By Gasmet Technologies Oy

  • Marine Monitoring of Emissions of Air Pollutants

    Many of us who are not in the marine shipping business probably think of vessels as practical means of transportation, or, when it comes to cruising ships,  a place to spend your vacation. However, not all of us realize that large ships also are floating large power plants, with all aspects that come with power plants including potential contribution to air pollution. The ...


    By Opsis AB

  • Pneumatic Focusing Gas Chromatography: A 3-in-1 Continuous, Automated, Ambient-Fence line-Fugitive Emissions Instrument

    This project involved design improvements in both software and hardware, and commercialization of our Pneumatic Focusing Gas Chromatography technology for continuous monitoring of VOCs and Air Toxics and demonstration of its performance in year-long monitoring programs at an EPA Superfund site in Fargo North Dakota and an Oregon Department of Environmental Quality Air Toxics site in Portland ...


    By VOC Technologies

  • Wastewater treatment plant monitors Greenhouse Gas emissions - Case study

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • Monitoring Gas Emissions from Volcanoes to Predict Volcanic Activity

    To understand and predict the behaviour of volcanoes an increasing number of scientists are combining geological monitoring and geochemical models. By measuring and monitoring the prevalence of gases like CO2, scientists hope to be able to better predict the likelihood of volcanic eruptions. In 2010 Iceland’s Eyjafjallajökull volcano erupted, releasing 250 million ...


    By Edinburgh Sensors Ltd

  • Marine Monitoring of Emissions of Air Pollutants

    Many of us who are not in the marine shipping business probably think of vessels as practical means of transportation, or, when it comes to cruising ships, a place to spend your vacation. However, not all of us realize that large ships also are floating large power plants, with all aspects that come with power plants including potential contribution to air pollution. ...


    By Opsis AB

  • Planning for a Gas Monitoring System

    Do you need a gas monitoring system? Then you already know which gases you want to monitor, you probably have an idea of measurement ranges and accuracy requirements, and perhaps you have a budget for the system. But which other aspects have to be considered, and how do you actually design the system? ...


    By Opsis AB

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you