continuous emissions monitoring method Articles

  • In-situ continuous emissions monitoring & regulatory compliance

    As environmental scrutiny has risen and regulation has tightened in recent years, the importance of having accurate information on the environmental performance of your power plant has increased. After all, if you want to manage something, you need to be able to measure it. The analogy is obvious; you wouldn't start a diet without first investing in a set of scales. So it is with Continuous ...

  • Compliance to standards in continuous emissions monitoring case study

    Customer: Glass Manufacturer Application: Continuous Emissions Monitoring Service (CEMS) for Glass Manufacturing Background: A glass factory is required to ...


    By Ecotech Pty Ltd

  • X-Ray Fluorescence-Based Multi-Metal Continuous Emission Monitor

    ABSTRACT: Army demilitarization incinerators will need to comply with the Hazardous Waste Combustor National Emission Standard for Hazardous Air Pollutants that will regulate metals and metal compounds listed under the Clean Air Act Amendments. A large problem for these incinerator operations is limited knowledge of the type and quantity of emitted metals, so that compliance may be determined ...


    By Cooper Environmental

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • Innovative emissions monitoring uptake soars

    Firms in the UK’s waste and power sectors are proactively seeking Best Available Techniques for emissions monitoring, according to Enviro Technology. Over recent months there has been a surge in demand for sophisticated equipment, such as monitors of total gaseous mercury. The air quality and emissions monitoring specialist believes that a combination of factors, such as the recast ...

  • Continuous emission monitoring and control of packed tower odor control systems using the sycamore CEM

    ABSTRACT Packed-tower chemical scrubbers, with sodium hydroxide (caustic) and sodium hypochlorite (bleach), are commonly used to treat foul air from wastewater treatment processes. The available control mechanisms include a pH probe and controller for the sodium hydroxide feed, an oxidation reduction potential (ORP) probe with a controller toestablish the bleach feed, and proprietary ...

  • New laser-based dust emission monitoring system

    Abstract A new generation of continuous particulate matter concentration monitoring instruments is presented, covering a measuring range of 0 to 1000 mg/m3. The laser-based scattered light instrument gives an improved stability as well as excellent resolution in the low range. This enables high concentration measurement as well as especially low emission monitoring down to 0.01 mg/m3 with a ...


    By Sigrist-Photometer AG

  • Monitoring NH3, N2O, CO2 and CH4 emissions

    In France, as in other countries, there is a need to improve knowledge of greenhouse gas and ammonia emissions from livestock production with various management options. The aim of this study was to quantify the NH3, N2O, CO2 and CH4 emissions from two pig solid manure heaps, turned and not turned, in order to examine the effect of turning on gaseous emissions and to obtain additional information ...


    By BioCycle Magazine

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • Demonstrating Compliance through Integration of Continuous Monitoring Data with Environmental Management Information

    An essential ingredient for Emissions Management Information Systems (EMIS) to effectively manage compliance information is facility monitoring data, especially at a petroleum refinery where so much process data is already monitored to ensure optimum operating performance and safety conditions. EMIS solutions typically reside on corporate or facility servers that are readily available to ...

  • Method 301 Evaluation of Candidate conditional methods case study

    A new metal emissions measurement and validation system has recently been developed that has the potential to significantly improve our understanding of metal emissions from a wide range of source categories. This system consists of: A continuous emission monitoring system (Xact-CEMS) An instrumental analyzer procedure (Xact-IAP) A sampling and analysis measurement method ...


    By Cooper Environmental

  • Reducing Odor and VOC Emissions

    The Montgomery County Regional Composting Facility (MCRCF) in Silver Spring, Maryland is designed to process 400 wet tons/day of lime amended biosolids from the Blue Plains Wastewater Treatment Plant (WWTP) in Washington, D.C. Recently, political pressures forced operations to cease at the MCRCF. Although the aerated static pile composting plant’s fate has not been completely decided, its owner, ...


    By BioCycle Magazine

  • Double Duty Scrubber for TDI Fumes A case-history description of a relatively uncomplicated but effective method for handling large runaway emissions of TDI and solvent vapors.

    NKI (B. V. Nederlandse Kleurstofindustrie, a subsidiary of Morton-Thiokol, Inc. U.S .A.), and one of the major industrial firms in the Netherlands, had a problem with extremely toxic TDI (toluene di-isocyanate) emissions from one of their processes . On a batch basis in different reactors, the largest being 6.5 m cubed(1717 U.S . gallons), a solution polymerization of TDI with polyols in a ...


    By CR Clean Air Group, LLC

  • Proper Monitoring Essential to Reducing ‘Fugitive Emissions` Under Leak Detection and Repair Programs

    The Clean Air Act requires refineries to develop and implement a Leak Detection and Repair (LDAR) program to control fugitive emissions. Fugitive emissions occur from valves, pumps, compressors, pressure relief valves, flanges, connectors and other piping components. Comparison monitoring conducted by the U.S. Environmental Protection Agency's (EPA) National Enforcement Investigation Center ...

  • A new approach to SSM emissions management

    On October 16, 2009, the United States Court of Appeals for the District of Columbia Circuit (DC Circuit) mandated the vacatur of the “Startup, Shutdown, and Malfunction (SSM) exemption” allowed under General Provisions in Subpart A of the National Emission Standards for Hazardous Air Pollutants (NESHAP).1  Under the SSM exemption, NESHAP Subpart A previously stipulated that an ...


    By Trinity Consultants

  • Minimizing Refrigerant Emissions in HVAC Systems

    Managing the operation and maintenance of a facility's air conditioning equipment has always been a major responsibility, as chillers often represent the single largest electrical load in a facility. Since the annual cost of operating chillers is a major ...


    By IHS

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • Gas Detection and Monitoring Systems

    In greenhouse applications, the accurate measurement of a number of environmental parameters such as carbon dioxide concentration, temperature, light intensity, water, humidity, pH and nutrient levels using sophisticated sensors is used to create a controlled environment for optimising plant growth rates while minimising energy usage. Carbon dioxide concentration is also one of the best ...


    By Edinburgh Instruments Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you