continuous emissions monitoring technology building Articles

  • Green Technology for Healthy Air and Energy Conservation: New Technology for Continuous, Indoor Air Quality Monitoring

    Continuous monitoring for indoor, Volatile Organic Compounds (VOCs) has been carried out by VOC Technologies (VOCTEC) during and after construction of Epler Hall, a newly-built green building on the PSU campus. Epler is a 6-story building devoted largely to student apartment residences, with classroom and office space on the first floor. Epler has no central heating/ventilation system. Epler’s ...


    By VOC Technologies

  • Green Buildings: Economics and Policies

    Introduction Green building has received increased attention over the past decade from both environmental economists and policymakers. While there is no single definition of “green buildings” or its related policy, researchers and organizations tend to emphasize resource efficiency in building and reducing the impacts of buildings on human health and the environment. ...


    By Oxford Journals

  • Metal Coating Emission Control

    The use of regenerative thermal oxidizers is expanding into applications where they wouldn’t have been considered years ago, says Mike Scholz As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking ...

  • Reducing Odor and VOC Emissions

    The Montgomery County Regional Composting Facility (MCRCF) in Silver Spring, Maryland is designed to process 400 wet tons/day of lime amended biosolids from the Blue Plains Wastewater Treatment Plant (WWTP) in Washington, D.C. Recently, political pressures forced operations to cease at the MCRCF. Although the aerated static pile composting plant’s fate has not been completely decided, its owner, ...


    By BioCycle Magazine

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • Importing environmental technologies to China

    By mid-2007, the Shuikoushan Non-Ferrous Metal factory in Hunan Province faced a crisis. As part of its 11th Five-Year Plan (2005-2010), the Chinese government was closing down high-polluting factories–and the Shuikoushan factory was among those at risk. The 110 year-old state-owned factory, with a gross annual income of more than US $1 billion and 12,000 employees, was emitting high levels of ...

  • Wireless monitoring for a safe indoor environment

    This article discusses the benefits of wireless technology for continously monitoring the indoor environment. In striving for the construction of energy efficient and cost-effective buildings, the imperative issue of the buildings Indoor Air Quality (IAQ) is often overlooked. This can often lead to a unhealthy indoor environment and even to conditions such as Sick Building Syndrome (SBS) or other ...


    By PPM Technology

  • Reduce carbon and energy cost with Building Energy Management Systems

    Building Energy Management Systems can achieve the cost and carbon saving benefits businesses are seeking. One of the most efficient methods of reducing energy consumption is a Building Energy Management System (BEMS), yet many organisations overlook BEMS  in their energy efficiency plans because of ...


    By ENER-G

  • EMEP/EEA air pollutant emission inventory guidebook 2016

    1 Guidebook Introduction 1.1 Introduction The joint EMEP (1)/EEA Air Pollutant Emission Inventory Guidebook (the 'Guidebook'), following the 'Guidelines for Reporting Emissions and Projections Data' under the United Nations Economic Commission for Europe (UNECE) Convention on Long-range Transboundary Air Pollution (LRTAP) (2), provides concise guidance on how ...

  • Vibration monitoring and analysis in aircraft engine test cells

    Snecma, part of the SAFRAN group, is dedicated to the production of engines for both air and space. Working alone or in partnership, Snecma designs, develops and produces engines for civil and military aircraft, launch vehicles and satellites. The company is organised in three divisions: Commercial Engines – Snecma and GE Transportation team up to produce the bestselling family of CFM56 ...

  • IoT Technology Increases Municipal Waste Management Efficiency

    You’ve probably come across an overflowing trash bin at least once or twice if you live in a major city. That’s because cities generate more waste than other areas of residency. For example, the City of Chicago accounts for nearly 70% of all waste generated in the state of Illinois, which isn’t all that surprising knowing that population density tends to be higher in cities. ...


    By One Plus Corp.

  • Aerojet builds on tradition of EH&S performance and supports innovation in mobile waste data collection

    Aerojet, a GenCorp Inc. company, is a major space and defense contractor specializing in missile and space propulsion. Since its founding in 1942, Aerojet has been widely recognized as a leading force in the development of crucial technology and products that have protected America from potential enemies. In recent years, Aerojet has also played a leadership role in the implementation of ...


    By IHS

  • Your guide to science and technology at Rio+20

    How will science and technology fare at the Rio+20 summit? Aisling Irwin looks at scientists' demands and assesses their chances. Is this the last chance for scientists to save the planet? The UN Conference on Sustainable Development — Rio+20 — enters its final phase of negotiations next week at a summit to be attended by more than 130 heads of state. At stake ...


    By SciDev.Net

  • Corus installs gem steam traps to improve energy conservation and reduce co2 emissions

    Corus’s Trostre Steel Works in Llanelli, South Wales has installed Thermal Energy International’s GEM Venturi orifice steam traps as part of the plant’s continuous improvement programme into energy conservation and CO2 reduction.  A leading supplier of high quality light gauge steels, the site produces over 400,000 tonnes a year of packaging steels for the UK market. As ...

  • TDLS for a Cleaner Environment - Case Study

    In this case study for Axetris Laser Gas Detection (LGD) products, Urs F. Boegli – Senior Application Engineer - looks at the historical perspective on the development of environment regulation and emission control technology. The European Community has published several directives to harmonize the legislation on industrial emissions. These include the Large Combustion Plant Directive ...


    By Axetris Ag

  • Case study - JJO wood waste – biomass

    A UK leading producer of kitchens and bathroom furniture invest in the future of no costs for the disposal of wood waste and no oil or gas bills for heating of the total company site premises. J J O PLC – manufacturer of Colonial Kitchens, Colonial Bedrooms, eco Kitchens and eco Bathrooms. Founded over 100 years ago and now the leading supplier to many of the best outlets within the ...


    By Mawera (UK) Ltd

  • Solutions for Automotive Testing

    In recent years, the field of research, development and testing of vehicles has created a need for integrated testing systems which cover the entire vehicle including engine and driveline. These systems also need to be capable of being deployed globally in a supportive structure. As a means of responding to these market requirements, building on our strengths in vehicle emissions measurement ...


    By HORIBA Europe GmbH

  • The Gasmet story from an academic idea to a global business

    In this article, Dr Petri Jaakkola, founder and Chairman of Gasmet Technologies Oy explains how an idea shared by a group of researchers at the University of Oulu in Finland, during the early 1970s, developed into one of the world’s leading gas monitoring instrumentation manufacturers. Early history – technology development At first, the Finnish researchers understood ...


    By Gasmet Technologies Oy

  • Understand the Capabilities of Bio-Oxidation

    Biological air-pollution control technology* has been used extensively in Europe for decades and, to a lesser extent, in North America for the past two decades. Most installations in the U.S. have been on air-emission vent streams that were not subject to numerical limits (i.e., ...


  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you