continuous gas analyser manufacturer Articles

  • FTIR analyser improves anaesthetic gas detection at Torbay Hospital

    A unique gas measurement technology has enabled South Devon Healthcare’s Pharmacy Manufacturing Unit (PMU) at Torbay Hospital to conduct highly effective and detailed analysis of anaesthetic gases in a variety of hospital locations. The primary function of the PMU’s quality control department is to check active ingredient levels and sterility in manufactured pharmaceutical ...


    By Gasmet Technologies Oy

  • Systech`s gas analysers used in custom built glove boxes - Case Study

    For precise monitoring of oxygen and other gases in glove box systems, Pyramid Engineering use the EC900 oxygen analyser and 542 binary gas analyser. Since 1990, Pyramid Engineering Services have been developing their range of glove boxes. They provide a perfectly controlled environment for handling and assembly applications in many industries. Originally designed to complement Pyramid’s ...


    By Systech Instruments Ltd

  • Geotech’s first GA5000 landfill gas analyser takes 100,000 readings for SUEZ environnement - Case Study

    Geotech’s first GA5000 analyser, manufactured three years ago, was recently spotted in the company’s calibration rig.  This portable landfill gas monitor was the first production unit of the newly launched GA5000 gas analyser range and has prompted Geotech to look into the analyser’s life since then. The analyser was on its sixth service since manufacture, under ...

  • Continuous Mercury Monitoring Benefits Cement Plants

    Antti Heikkilä from Gasmet Technologies highlights the challenges faced by mercury monitoring in cement kilns, and explains how a new continuous mercury monitoring system addresses these issues and provides process operators with an opportunity to improve environmental performance and demonstrate compliance with forthcoming legislation. Background The production of cement ...


    By Gasmet Technologies Oy

  • Compliance to standards in continuous emissions monitoring case study

    Customer: Glass Manufacturer Application: Continuous Emissions Monitoring Service (CEMS) for Glass Manufacturing Background: A glass factory is required to ...


    By Ecotech Pty Ltd

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...

  • Planning for a Gas Monitoring System

    Do you need a gas monitoring system? Then you already know which gases you want to monitor, you probably have an idea of measurement ranges and accuracy requirements, and perhaps you have a budget for the system. But which other aspects have to be considered, and how do you actually design the system? Whether it is about air quality monitoring, continuous emissions monitoring or process control, ...


    By Opsis AB

  • Bioremediation/natural attenuation continues after ISCO treatment

    Scientists and engineers from the private sector and EPA are evaluating the potential for in situ bioremediation and/or natural attenuation to successfully treat residual soil and ground-water contamination after source-area in situ chemical oxidation (ISCO) treatment. The studies were prompted by concerns that the two treatment technologies may be incompatible due to detrimental impacts on ...

  • Planning for a Gas Monitoring System

    Do you need a gas monitoring system? Then you already know which gases you want to monitor, you probably have an idea of measurement ranges and accuracy requirements, and perhaps you have a budget for the system. But which other aspects have to be considered, and how do you actually design the system? ...


    By Opsis AB

  • Danger and Detection of Hydrogen Sulphide Gas in Oil and Gas Exploration and Production

    A rig worker smells rotten eggs near the well head, rubs his itchy eyes as he investigates the frosty pipe connections. After a few moments, he believes all is fine as he no longer smells the tell-tale hydrogen sulphide odour. In this scenario, we can only hope the worker recognises the danger and quickly leaves the site. Oil fields, especially mature ones, can produce hydrogen sulphide gas ...

  • AMETEK Land reintroduces continuous emissions monitoring system for smaller combustion processes

    AMETEK Land announces the reintroduction of the FGA 900 Series, its compact and fully integrated continuous emissions monitoring system (CEMS) for flue gas measurements on processes burning natural gas and biomass.  ...


    By AMETEK Land

  • Are environmental monitoring manufacturers pulling a fast one with back-to-base servicing?

    Geotech's users of environmental monitoring equipment are not alone in their frustration at having valuable equipment unavailable when they require servicing.  Is this just a money-making scam?  What do users get for their money?  By combining maximum possible local support with a 100-point factory full service schedule, Geotech believe they have the best balance of user ...

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • U.S. Natural Gas Exports: Friend or Foe?

    U.S. natural gas production is booming. According to the Energy Information Administration (EIA), production grew by 23 percent from 2007 to 2012. Now—with production projected to continue growing in the decades ahead—U.S. lawmakers and companies are considering exporting this resource internationally. But what are the climate implications of ...

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • Innovation drives flue gas treatment - Case study

    Sharing a common goal, experts in emissions monitoring and emissions abatement have formed a working partnership to develop innovative new materials for treating pollutants in flue gas emissions. ...


    By Gasmet Technologies Oy

  • Sonic nozzles for gas calibrators, when simplicity provides accuracy!

    Gas analyser’s calibration is a task required in many applications according to either legislation or quality systems management. This is the case for Air Pollution Monitoring or Continuous Emissions Monitoring devices installed in cabinets, for continuous analysis in remote locations. Measurements in traces range are performed and analytical devices specifications need to be validated and ...


    By LNI Swissgas SA

  • Wastewater treatment plant monitors Greenhouse Gas emissions - Case study

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • The Portable FID for Stack Emissions: lightweight, compact, ergonomic, safe

    POLLUTION S.r.l. manufactures POLARIS FID analyser, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you