continuous gas analyzer manufacturer Articles

  • Generator gas analyzer for monitoring of hydrogen cooled turbo generators

    Hydrogen cooled generators require safety measures that reliably prevent the formation of explosive gas mixtures during normal operation as well as maintenance periods. Thermal conductivity technology based gas analyzers are used for that task. A standardized CALOMAT 6 analyzer system - Set GGA - has been especially designed for this measuring task. Regarding redundancy and explosion ...

  • Inno-badge – an electronic dosimeter badge for continuous recording of a worker`s exposure to Phosgene gas

    Untitled Document Phosgene, also known as Carbonyl Chloride, is a widely used but highly toxic substance. At room temperature Phosgene gas is nearly colourless, and at low concentrations ...


    By Baum Publications Ltd.

  • Praxair Selects Baseline-MOCON’s New BevAlert Gas Analyzer To Improve Detection Sensitivity Of CO2 Impurities

    Lyons, CO — Praxair, Inc. has upgraded its carbon dioxide (CO2) gas analysis with the installation of multiple BevAlert™ Model 8900 at its plants across North America and select international locations.The BevAlert Model 8900 new gas chromatograph, from Baseline-MOCON, Inc., a subsidiary of MOCON monitors trace impurities in CO2 (and other gases) while setting new standards for analytical ...


    By AMETEK MOCON - Baseline

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • Portable lead analyzer to locate source of lead

    OBJECTIVE: To investigate the sources of lead in the environment in children with elevated blood, with the help of a Field Portable X-Ray ...

  • Titanium Demand on Rise for Additive Manufacturing Printing: How it’s Made? Titanium Plasma Atomization.

    Plasma atomization is used in many applications, including 3D printing. First developed in 1998, this technique has risen to become the industry standard process for creating reactive metal powders suitable for 3D printing. Learn how plasma atomization works and why you need an oxygen monitor to stay safe with plasma atomization.  How Plasma Atomization Works ...

  • Environics - Reducing calibration gas cost by up to 60%

    EPA's appendix 'M' 40 CFR 51 reduces calibration gas cost by 60%By: Terrence P. Dunn, President of EnvironicsOn May 30, 1995, the EPA published the final version of Method 205 for inclusion in Appendix M of 40 CFR Part 51 entitled, 'Verification of Gas Dilution Systems for Field Instrument Calibrations.' Continuous emissions monitoring systems (CEMS) require ...


    By Environics, Inc.

  • Developing Technologies to Detect Hydrogen Sulfide (H2S) Gas

    Abstract Hydrogen sulfi de (H2S) gas can cause nausea, headaches, unconsciousness, and death. Industries struggle to detect this deadly substance before it harms workers or communities. Safety system manufacturers have developed detectors that sense the H2S quickly and accurately. This paper illustrates, in general terms, considerations in effective placement of H2S detectors: ...

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Mercury Removal from Nerve Gas Ton Container Rinse Waters

    IE was retained by a United States Army subcontractor to perform a process determination with analytical verification for the treatment of the rinse water from decontaminated nerve gas agents. The Pentagon Munitions Deconstruction Committee (PMDC) fully reviewed and approved the process developed. The wastewater was generated from the rinsing of 2,000-pound (ton) containers in a punch/drain/rinse ...


    By Integrated Engineers Inc.

  • Process analytics in gas-to-liquid (GTL) plants – Case Study

    NG, FT and GTL Natural Gas (NG) is a vital component of the world's supply of energy. It is one of the cleanest, safest, and most useful of all energy sources. NG is colorless, shapeless, and odorless in its pure form. It is combustible, and when burned it emits lower levels of potentially harmful byproducts into the air than other fuels. NG is a mixture of hydrocarbon gases. While it ...

  • Electrofilter protection by fast monitoring of CO in flue gas – Case Study

    Electrostatic precipitators Many industrial operations produce exhaust gases that contain dust, fly ash (unburned constituents), fumes (including fine elemental particles such as cadmium, sulfur and lead) and mist (such as coal tar), which cause an unwanted impact to human health and the environment. One widely used method of removing such contaminants from a gas stream is to use an ...

  • New air quality rules challenge oil & natural gas industry

    EPA Administrator signed a suite of proposed new air regulations affecting both the Production/Processing and Transmission/Storage sectors of the oil and natural gas industry. The proposed rules mandate the use of emission controls as well as work practices through two different air regulatory programs – New Source Performance Standards (NSPS) and National Emissions Standards for Hazardous ...


    By Trinity Consultants

  • Maxum process gas chromatograph measures and optimizes synthetic rubber production – Case Study

    Rubber Rubber is a collective term for macromolecular substances of natural rubber (NR) or synthetic rubber (SR) origin. Natural rubber use dates back to the Mayas but was first recognized as technical material in 1851 by Charles Nelson Goodyear. He presented a new material produced from the milk of rubber trees, which had been treated with sulfur and vulcanized to strengthen the ...

  • Process analytics in methanol plants – Case Study

    Methanol is a clear liquid usually made from natural gas. It is a clean burning fuel, containing almost no sulphur or nitrogenous materials. It is a petrochemical that is used to make countless industrial and consumer products. In the future, methanol could be used as a source of hydrogen for fuel cells. Different concepts are in use to produce methanol looking always for higher plant efficiency ...

  • Nitrogen Demand Increases for Semiconductor: How Safe Are You?

    As users demand ever-smaller smartphones and better televisions, semiconductor manufacturing plants are tasked with developing new products faster and using new materials. Key to the continued success of the semiconductor industry are inert gases, which include nitrogen and argon. When used safely, both nitrogen and argon play a number of important roles within the semiconductor ...

  • Feed Forward Control

    The Customer The Company is a world leader in the development and production of herbicides, fungicides, and insecticides for the professional agricultural, commercial and consumer turf and ornamental markets. The Process Their manufacturing operations are anchored by large-scale chemical synthesis and their production is achieved through highly ...

  • Heating value

    The CustomerThis Chemical Company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The ProcessThe company uses flare stacks to dispose of the waste products ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you