continuous gas meter Articles

  • Who Needs Continuous Emissions Monitoring?

    Continuous emissions monitoring (CEM) is about monitoring air pollutants generated by a specific activity and emitted to the ambient air, typically through a tall stack or other exhaust pipe. The “activity” can be some industrial process like a power plant or a waste incinerator, but it can also be on a much smaller scale such as a car equipped with an internal-combustion engine. ...


    By Opsis AB

  • Continuous monitoring of moisture present inside a process chamber

    Problem Statement Moisture inside a process chamber is a big silent killer during wafer production. When production yield goes down, it is hard to pinpoint the source of the problem. Most of the time wafers need to be sent to labs for analysis, while production is stopped. If the problem is related to a high level of moisture inside the reactor, there are several factors that can cause ...


    By CIC Photonics, Inc.

  • Continuous blender increases production, diminishes heat buildup

    CJB Industries, Valdosta, Ga., custom-formulates, processes, and packages chemicals and provides research, development, and engineering services. CJB's newest production line is for a high-loading solid that combines 50 percent liquid acid with 50 percent dry clay product, resulting in an 8- to 16-mesh dry corrosive granular material that resembles kitty litter. The customer for this material ...

  • Wastewater Plant Relies on Thermal Flow Meter for Co-Gen Power Gas Blending Process

    The Rahway Valley Sewerage Authority (RVSA), which operates a large wastewater treatment plant in New Jersey, embarked on a green co-generation waste-to-energy project to power a portion of its operations. The plant performs primary, secondary, tertiary and sludge treatment processes in serving over 250,000 residential customers and 3000 industrial and commercial customers in a 40-plus square ...


    By Modern Pumping Today

  • Gas Mass Flow Metering - Innovations Promise More Economical Choices- White Paper

    Introduction As the drive towards energy independence in the United States continues at full speed, oil and gas companies are turning to hydraulic fracturing to increase production. Increasingly stringent state and national regulations for flare gas in particular now require the installation of mass flow measurement instruments to measure waste and excess gases burned off as a result ...


    By Sierra Instruments, Inc.

  • TDLAS Gas Detection Instrumentation

    PKL Technologies Inc. manufactures tunable diode laser (TDLAS) based gas detectors and monitors. Spectra-1 open path gas sensors are used in a variety of environmental and safety remote sensing applications. Spectra-1 gas sensors have been designed in a compact, easy to use, robust and portable format. Spectra-1 has been developed using proprietary hardware and software, to produce a low cost ...


    By PKL Technologies Inc.

  • New Developments in Thermal Dispersion Mass Flow Meters

    Introduction This paper describes a newly developed microprocessor-based thermal dispersion mass flow meter that uses four temperature sensing elements in its flow sensor instead of the traditional two elements and automatically manages changes in gas selection, gas temperature, gas pressure, and outside temperature. This new mass flow meter is ideally suited for apportionment applications ...


    By Sierra Instruments, Inc.

  • Continuous measurement of Process oxygen for Claus sulfur recovery unit (sru) start-ups and shut-downs case study

    During start-up and shut-down, any time a sulfur recovery unit (SRU) transitions from ambient temperature through fuel gas warm up to the introduction of acid gas, measurement of 02 stoichiometry is critical. Historically, operators have manually taken samples using a portable electrochemical type Os analyzer. While giving more or less satisfactory results, the requirement for more stringent ...

  • Smart meters: Truly a cure for energy blindness?

    And now for a dose of reality.   No doubt smart meters are a good thing, but even their most ardent fans must admit that a degree of hoopla surrounds these little digital boxes. We hear that if consumers can just see how much power they use in real time, and what it costs, our energy woes will be no more.   Smart meters will even cure the blind. The energy blind that ...

  • Overcoming Natural Gas Sampling Challenges in Oil & Gas Applications

    It is a fact that in order to comply with various government rules and regulations, oil and gas companies have to continually take natural gas samples to prove the gas composition and amount of gas flowing in their oil fields. The challenge comes in trying to actually take an adequate gas sample representative of the gas flow. First, engineers must carefully consider where the ...


    By Sierra Instruments, Inc.

  • Advances in Thermal Dispersion Mass Flow Meters - Part 1 Principle of Operation

    Abstract This paper describes an advanced microprocessor-based thermal dispersion mass flow meter that uses four temperature sensing elements in its flow sensor instead of the traditional two elements and has a dry velocity sensor that uses no potting materials instead of the traditional potted velocity sensor. This unique new mass flow meter automatically manages changes in gas selection, ...


    By Sierra Instruments, Inc.

  • Sizing and Selecting the Proper Metering Pump: Part 1 of 2

    A typical agriculture or process application can consume large amounts of chemicals during daily operations. While the volumes may be large, though, they must also be very precise, with exact amounts delivered according to strict injection schedules. The pressures—from very high to very low—that the chemicals are injected at must also be governed precisely. This demand for ...


    By Modern Pumping Today

  • Digester gas - Stornoway Scotland - case study

    Scottish Island to be the first to utilise Anaerobic Digestion in waste treatment Comhairle nan Eilean Siar Stornoway, Isle of Lewis, Scotland “We were convinced by ENER-G’s ability to install a system that met with our requirements for a facility that is an innovative combination of waste treatments and includes the UK’s first dry Anaerobic Digestion facility” ...


    By ENER-G

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • LED Applications for Oil and Gas Refining and Processing

    Oil and gas processing facilities are unsafe due to the existence of hazardous compounds during operations. When addressing such issues, companies in the sector may deploy explosion proof lighting systems to prevent the ignition of sparks created from the electrical equipment. The adoption of LED technology in oil and gas refineries has helped reinforce key safety measures associated with ...


    By Larson Electronics LLC

  • Oil refinery vapour gas case study

    1.0 Evaluation of Refinery Gases Various refinery gases are generated in the process of oil refining. These vary, depending upon the type of crude oil being distilled, such as Reduced Crude distillation, or Naphtha cracker. For the purposes of this case study the description and range of refinery gases are those gases produced from refining Crude Oil and Reduced Crude only. Crude ...

  • Advances in Thermal Dispersion Mass Flow Meters - Part 2 Installation and Flow Calibration

    Abstract Part 1 of this two-part series describes the principle of operation of a new microprocessor-based thermal dispersion mass flow meter that uses four temperature sensing elements in its flow sensor and has a dry velocity sensor. Part 1 shows how this unique system provides automatic management of changes in gas selection, gas temperature, gas pressure, and outside temperature. This ...


    By Sierra Instruments, Inc.

  • Non-contacting solution for Plugged off flow meters in the oil patch - Case Study

    For years Petrobakken Energy Ltd. used inline turbine flow meters to track the flow rate of oil recycled to treaters. But with a high concentration of wax and sand in the oil, the turbine meters were quickly plugging off. The line had to be shut down at least once a day and the turbine flowmeters disassembled for cleaning. This was troublesome and expensive. Petrobakken knew there had to be a ...


    By Greyline Instruments Inc.

  • Hydro Nano Gas could be the Answer for Neutralizing Carbon Fuel Emissions

    Hydro Infra Technologies (HIT), a Swedish clean tech company based in Stockholm, has developed an innovative patent pending approach for neutralizing carbon fuel emissions by generating a novel gas called Hydro Nano Gas (HNG). In spite of all the advancement happening in the energy sector, globa economies are ...

  • Wastewater treatment plant monitors Greenhouse Gas emissions - Case study

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you