continuous mercury test sampling Articles

  • Relative Accuracy Testing of an X-Ray Fluorescence-Based Mercury Monitor at Coal-Fired Boilers

    ABSTRACT The relative accuracy (RA) of a newly developed mercury continuous emissions monitor, based on X-ray fluorescence, was determined by comparing analysis results at coal-fired plants with two certified reference methods (American Society for Testing and Materials [ASTM] Method D6784-02 and U.S. Environment Protection Agency [EPA] Method 29). During the first determination, the ...


    By Cooper Environmental

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Ground Zero Air Quality Has A Long Way To Go! A Summary of Air Quality Testing in Surrounding Buildings

    There are still a wide range of concerns about air quality in the vicinity of Ground Zero. Many commercial and residential spaces have yet to be re-occupied. In only a few cases has any sort of inspection or testing been done to determine if they are safe to occupy. The greatest concerns are asbestos and the very irritating concrete dust that spread throughout lower Manhattan during the collapse ...

  • OTM 17: Determination of Metal Concentrations Using Filters and Solid Sorbents in XRF Analyisis case study

    Eli Lilly and Company (Lilly) operates a waste incineration system located at the Tippecanoe Laboratories in Lafayette, Indiana. This incinerator system includes an Xact multi-metals continuous emissions monitoring system (Xact-CEMS, manufactured by Cooper Environmental Services, LLC) for demonstrating attainment with the Hazardous Waste Combustor MACT for semi-volatile metals, low-volatile ...


    By Cooper Environmental

  • Solvent-Free Synthesis of c-Axis Oriented ZSM-5 Crystals with Enhanced Methanol to Gasoline Catalytic Activity

    ZSM-5 crystals with controllable c-axis length were successfully synthesized through a one-pot solvent-free route, with urea as an additive. X-ray diffraction patterns (XRD) show that the prepared samples exhibit high crystallinity. N2 adsorption–desorption isotherms and mercury intrusion porosimetry (MIP) analysis together with TEM observations indicate that micro-, meso-, and ...


    By SusChem

  • Increased demand for XRF analyser hire

    Steve Drake, NDT Market Manager at Ashtead Technology believes that XRF is one of the most important technologies in the company’s fleet of NDT and environmental testing instruments. “With a small amount of training, almost anyone can implement detailed inspections in a wide variety of applications, and with most instruments being lightweight and robust, XRF analysers are among the ...


    By Ashtead Technology Ltd

  • Mining Related Sediment Impacts: Causes, Significance and Solutions1

    The ProblemAs with many production activities related to the use of natural resources, initial legacies in the form of negative impactsare often characterized by acute pollution of surface waters. In the case of the mining industry, long after the originalmining-related activity ceases, residues such as tailings, spoil piles, sediments in settling ponds or sediments reaching natural ...


  • EPA finalizes boiler NESHAP

    EPA published the final National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions. EPA developed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater than 25 tpy of ...


    By Trinity Consultants

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • The Gasmet story from an academic idea to a global business

    In this article, Dr Petri Jaakkola, founder and Chairman of Gasmet Technologies Oy explains how an idea shared by a group of researchers at the University of Oulu in Finland, during the early 1970s, developed into one of the world’s leading gas monitoring instrumentation manufacturers. Early history – technology development At first, the Finnish researchers understood ...


    By Gasmet Technologies Oy

  • Ex Situ Biological Treatment for Groundwater, Surface Water, and Leachate

    The main advantage of ex situ treatment is that it generally requires shorter time periods, and there is more certainty about the uniformity of treatment because of the ability to monitor and continuously mix the groundwater. However, ex situ treatment requires pumping of groundwater, leading to increased costs and engineering for equipment, possible permitting, and material handling. ...

  • Designing and Implementing Perimeter Air Monitoring Programs

    Perimeter or fenceline ambient air quality and meteorological monitoring programs have become increasingly valuable at hazardous waste, landfill, dredging, ports, and MGP remediation sites. Air quality monitoring programs protect public health and reduce owner liability ...


    By AECOM

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • How Wastewater Optimization Saved $50k for Corrugating Conversion Facility

    Paper & Pulp Box Company Corrugating Facility Wastewater Optimization This corrugating company did not have an existing pretreatment system. Wastewater from their converting and corrugating ...


    By Integrated Engineers Inc.

  • Portable lead analyzer to locate source of lead

    OBJECTIVE: To investigate the sources of lead in the environment in children with elevated blood, with the help of a Field Portable X-Ray ...

  • Tech update: Plant instrumentation - food engineering

    Sensors and other devices are the foot soldiers in automation architecture, but most food and beverage manufacturers still are looking for full value. You know an equipment category has arrived when it starts getting its own industry-specific center. For the food production sensors that do the heavy lifting in instrumentation technology, that day could arrive earlier rather than ...


    By Hardy Process Solutions

  • Ex Situ Biological Treatment for Soil, Sediment, and Sludge

    The main advantage of ex situ treatment is that it generally requires shorter time periods than in situ treatment, and there is more certainty about the uniformity of treatment because of the ability to homogenize, screen, and continuously mix the soil. However, ex situ treatment requires excavation of soils, leading to increased costs and engineering for equipment, possible permitting, and ...

  • Non-Ionising Radiation

    Pressures on the environment may occur through chemical, physical and biological agents. The subject of this study is physical agents, where physical fields are examined. Physical fields are part of the natural environment. Depending upon their properties and the surrounding conditions, physical fields are transmitted through the spaces in which we live, potentially affecting human health and ...

  • Top International News in Chemical Policy and Regulation

    AUSTRALIA Australia Releases Third Consultation Paper Concerning NICNAS Reform: On April 29, 2016, the National Industrial Chemicals Notification and Assessment Scheme (NICNAS) published the third consultation paper on its  ...


    By Acta Group

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you