continuous oil-in-water monitor Articles

  • The importance of groundwater monitoring

    Groundwater monitoring is an essential element in any environmental information system. Based upon validated groundwater monitoring data, information is derived on which decisions can be made. Constant monitoring provides the necessary data input for your smart environment and is basically the basis of the decision making process concerning spatial planning and climate change adaptation. As in ...


    By Eijkelkamp Soil & Water

  • Water Treatment Optimization - Case Study

    Drinking water treatment in North America has stringent requirements for effluent water quality, with a great amount of attention being drawn to the presence of hazardous disinfection by-products (DBPs) persisting through water distribution systems. The operation of water treatment plants involves addition of various mixing agents to help with coagulation and settling of organics in the raw water ...


    By MANTECH

  • A quick guide to oil analysis for engine test applications

    Reliability testing is a very important component of new engine development. Engineers need to fully understand and chart the engine lifetime performance under a variety of conditions before mass production may be considered. Many important performance data parameters are collected in real time through the many different types of sensors that are connected to the engine in the test cell and oil ...


    By Spectro Scientific

  • Why You Should Consider a Sample Conditioning Unit for Taking Low NOx Measurements When Using a Portable Emissions Analyzer

    Using state-of-the-art technology, we here at E Instruments create high-quality portable industrial combustion gas and emissions analyzers that are capable of taking precise, low NOx measurements for both NO and NO2. In particular, we recommend our sample conditioning unit to those of you who need to take accurate, low NOx or SO2 ...

  • Titanium Demand on Rise for Additive Manufacturing Printing: How it’s Made? Titanium Plasma Atomization.

    Plasma atomization is used in many applications, including 3D printing. First developed in 1998, this technique has risen to become the industry standard process for creating reactive metal powders suitable for 3D printing. Learn how plasma atomization works and why you need an oxygen monitor to stay safe with plasma atomization.  How Plasma Atomization Works ...

  • Different technology options for monitoring oil in produced water – inline continuous monitoring and IR analysis

    No offshore facility wants to be caught with a sheen around their platform as that can result in a costly fine for exceeding discharge permit limits for oil. Onboard oil in water analyzers are necessary to ensure the oil/water separation systems are functioning properly before overboard disposal of the produced water. Bench top analyzers have traditionally been used to test oil in water although ...


    By Spectro Scientific

  • Continuous noise monitoring for environmental application

    The increasing awareness of the public of environmental issues such as CO2 emissions, carbon footprints and waste recycling has brought the issue of environmental noise to the fore. Many of the demands of modern society result in the creation of noise sources such as larger airports, additional power stations and higher road traffic levels. In addition to this, the expansion of towns and cities, ...


    By Cirrus Research plc

  • Continuous water quality monitoring on Kolubara River

    The first automated station for water quality monitoring located in Beli Brod on the Kolubara river has launched on July 2008. The station was established as the result of RHMSS participation in Twinning project financed by EU, where RHMSS was entrusted with the Component 2 of this project. Installed equipment continually records values of water level, temperature, pH, electroconductivity and ...

  • Monitoring Oil in Cooling Water - Case Study

    The Situation A municipal power plant in the southern United States operates more than 10 stationary power plant engines capable of producing 52 megawatts of electric power. The plant is part of a larger statewide power grid system. Within the grid, the municipality brokers the purchase or sale of power hourly, based on the needs of municipality and the market rate for power on the grid ...

  • In-situ continuous emissions monitoring & regulatory compliance

    As environmental scrutiny has risen and regulation has tightened in recent years, the importance of having accurate information on the environmental performance of your power plant has increased. After all, if you want to manage something, you need to be able to measure it. The analogy is obvious; you wouldn't start a diet without first investing in a set of scales. So it is with Continuous ...

  • Case study - Continuous discharge monitoring in Mecklenburg - Germany

    The Wallensteingraben was originally constructed as a channel and is almost 20 km long. In the context of implementing the European Water Framework Directive, goals include improving ecological passability. At the same time a measurement site for the continuous monitoring of discharge quantities was installed.  Products used include OTT SLD, OTT CBS and OTT LogoSens. Monitoring ...


    By The OTT Hydromet Group

  • Continuous biogas monitoring with AEMS in South Korea

    Application Biogas research projects Equipment AEMS biogas analyser Location South Korea Customer KEPCO Research Institute Requirement The customer ...


    By Geotech

  • Radiation Water Monitor in Real-Time and Continuous at Jefferson NL 2006

    Jefferson National Laboratory is a high tech laboratory located on a beautiful campus in suburban Virginia. Their research is centered on their high-energy electron accelerator. Energies generated are as high as 6 Gev continuous with currents up to 200 micro Amps. Where does the high-energy accelerator beam go after smashing atoms in the experimental sample? It impacts into a tank of purified ...


    By Technical Associates

  • Development and Deployment of a Real-Time Remote Continuous Monitoring System for Manholes

    A new system for the detection of septic sewer overflows (SSOs) and unauthorized intrusions of manholes has been developed jointly with public water agencies in San Diego County, California. The goal of the project is to provide detection of SSOs early enough to deploy personnel to provide preventative action. The system has been in operation since May of 2005 and has detected and, with field ...

  • Why is there no effective real-time Continuous Radiation Monitoring System?

    Japan's disaster has raised many questions regarding safety of the public. It has served as a wakeup call to the agencies tasked with protecting the public. Not least of these questions, but certainly the most far-reaching is the question of the safety of nuclear power and radiation contamination of air and water. Way back when nuclear power was first established, in the 1960s public opinion was ...


    By Technical Associates

  • Case study - Reservoir Aabach Germany - Continuous monitoring of contact pressure

    With a total volume of approximately 20 million cubic meters of water and a length of 450 meters, the reservoir supplies drinking water for 200.000 people in the area and fulfils also an important  function in the flood protection there. With the new monitoring solution it was possible to reduce the workload and cost for collecting, reading out and transmitting of data significantly. An ...


    By The OTT Hydromet Group

  • Biological monitoring system, iTOXcontrol, continues in Scarlino - Case Study

    The recorded death of fish in the river that flows out of the industrial zone of Scarlino has created the need of the installation of a biological alarm system. The decision was made to work with an automatic system, iTOXcontrol created by microLAN-The Netherlands represented in Italy by Ecotox Lds, which uses marine bacteria. The system compares the values of the light emission from these ...


    By microLAN B.V.

  • Fast, simultaneous and continuous monitoring of NOx and NH3 in DeNOx applications

    In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions (slip), to reduce environmental impact and cost of reagents. To optimize this process, it is essential to use an emissions analysis system for simultaneous and continuous monitoring of NOx and NH3. For preparing ...


    By Environnement S.A

  • Understanding Oil-in-Water Instrument Specifications

    The measurement capabilities of oil-in-water analysis methods are described by several analytical figures-of-merit. Examples are: Range (Linear and Dynamic) Limit of Detection (LOD) Limit of Quantification (LOQ) Precision (Repeatability and Reproducibility) Sensitivity Accuracy Response Time Some or all of these are often specified by customers in the bid packages issued when selecting a ...

  • Characterization of water pollution in drainage networks using continuous monitoring data in the Citadel area of Hue City, Vietnam

    In the Citadel area of Hue City, drainage systems that include canals and ponds are considerable sources of fecal contaminants to inundated water during the rainy season because canals and ponds receive untreated wastewater. It is important to investigate the characteristics of hydraulics and water pollution in canals and ponds. At the canals and ponds, water sampling was conducted during dry ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you