continuous particulate analyser Articles

  • Top 5 Differences between Micro Pulse LiDAR and Ceilometer Technology

    If you are evaluating backscatter LiDAR sensors for measuring aerosols, cloud vertical structure, and planetary boundary layer (PBL) heights, what factors should you consider in your comparison? It really comes down to a choice between the traditional analog technology used in ceilometers and the more recent advanced technology found in Micro Pulse LiDAR (MPL) sensors. To select the best tool ...

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • Gas analysers support management of Swindon fire

    The capability to convene a multi-agency Air Quality Cell (AQC) was established in England in 2009 following the Buncefield Oil Storage Depot incident. A review of this event identified the need to rapidly co-ordinate the acquisition, analysis and interpretation of air quality data in major incidents. Arrangements have been made in England to bring together experts from the Environment Agency ...


    By Quantitech Ltd

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Milton Keynes based Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Quantitech Ltd

  • Compliance to standards in continuous emissions monitoring case study

    Customer: Glass Manufacturer Application: Continuous Emissions Monitoring Service (CEMS) for Glass Manufacturing Background: A glass factory is required to ...


    By Ecotech Pty Ltd

  • FTIR Emissions Analyser helps manage UK Power Station

    A Gasmet FTIR multiparameter emissions monitor at Thetford power station is being used to demonstrate that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet’s UK distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are displayed ...


    By Gasmet Technologies Oy

  • FTIR emissions analyser helps manage UK power station

    A Gasmet FTIR multiparameter emissions monitor at Thetford power station is being used to demonstrate that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet’s UK distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are displayed ...


    By Quantitech Ltd

  • Bioremediation/natural attenuation continues after ISCO treatment

    Scientists and engineers from the private sector and EPA are evaluating the potential for in situ bioremediation and/or natural attenuation to successfully treat residual soil and ground-water contamination after source-area in situ chemical oxidation (ISCO) treatment. The studies were prompted by concerns that the two treatment technologies may be incompatible due to detrimental impacts on ...

  • Class I area impact analyses – recent guidance and updates

    As recommended in Appendix W of 40 Code of Federal Regulations (40 CFR) Part 51 (Guideline on Air Quality Models), the CALPUFF modeling system has been widely used for long-range transport dispersion modeling analyses, especially for applications related to Class I Area analyses (e.g., regional haze evaluation and Class I Prevention of Significant Deterioration (PSD) increment analysis). As U.S. ...


    By Trinity Consultants

  • Modelling both the continual erosion and regeneration of discolouration material in drinking water distribution systems

    The erosion of the cohesive layers of particulate matter that causes discolouration in water distribution system mains has previously been modelled using the Prediction of Discolouration in Distribution Systems (PODDS) model. When first proposed, PODDS featured an unvalidated means by which material regeneration on pipe walls could be simulated. Field and laboratory studies of material ...


    By IWA Publishing

  • The role of settling velocity formulation in the determination of gully pot trapping efficiency: comparison between analytical and experimental data

    Roadside gully pots are the connecting points between surface runoff and the underground drainage network; therefore they can be considered as the most superficial component of urban drainage systems. Gully pots are supposed to trap particulate matter washed off the catchment surface, but also to collect and convey stormwater into the network. The continuous accumulation of particulate matter ...


    By IWA Publishing

  • Air Quality Monitoring

    Why monitor air quality? Well, to monitor is to know. Everything else is just more or less qualified guesses. International, national and local air quality targets and limits are also tied to monitoring results What is Air Quality? How is air quality characterised? It is quite common to find air quality indexes, where the ranges are divided in sections indicating ...


    By Opsis AB

  • Air Quality Monitoring

    Why monitor air quality? Well, to monitor is to know. Everything else is just more or less qualified guesses. International, national and local air quality targets and limits are also tied to monitoring results. What is Air Quality? How is air quality ...


    By Opsis AB

  • White Paper & Video on FTIR multigas analysis

    Gasmet Technologies has published a free White Paper and a video on the simultaneous measurement of multiple gases in a wide variety of applications using FTIR. Both the video and the White Paper can be found here at www.gasmet.com or by visiting the Quantitech stand 62/63 at AQE 2017. ...


    By Gasmet Technologies Oy

  • Status of black carbon monitoring in ambient air in Europe

    Black carbon (BC) is increasingly discussed in science and environmental policy areas as an example of an air pollutant that affects both human health and contributes to climate change (e.g. WHO, 2012; UNEP/WMO, 2011; Bond et al., 2013; IPCC, 2013). In order to be able to make comparable measurements of BC in ambient air and to relate BC monitoring to health impacts and climate change it is ...

  • Revealing the costs of air pollution from industrial facilities in Europe

    This European Environment Agency (EEA) report assesses the damage costs to health and the environment resulting from pollutants emitted from industrial facilities. It is based on the latest information, namely for 2009, publicly available through the European Pollutant Release and Transfer Register (E-PRTR, 2011) in line with the United Nations Economic Commission for Europe (UNECE) Aarhus ...

  • A practitioner’s perspective on the uses and future developments for wastewater treatment modelling

    The modern age of wastewater treatment modelling began with publication of the International Water Association (IWA) Activated Sludge Model (ASM) No.1 and has advanced significantly since. Models are schematic representations of systems that are useful for analysis to support decision-making. The most appropriate model for a particular application often incorporates only those components ...


    By IWA Publishing

  • Why monitor dust in the workplace?

    Almost any place of employment can present a potential threat to health and safety from airborne particulates and aerosols. It is important to note, however, that dust hazards are not necessarily visible to the human eye and that the finest particles can represent the greatest threat because of their ability to travel deepest into the lungs. Effective monitoring is therefore key to the ...


    By Ashtead Technology Ltd

  • Focus on Microfiltration Part 3: Extending Service Life Using Prefiltration

    Last month we examined filter selection strategies for maximizing service life in continuous use applications.  In this 3rd installment, we will examine the use of prefilters to extend service life. Clarifying liquids with high levels of suspended solids is challenging, especially for applications requiring submicron filtration.  In these applications, filter users who experience ...


    By Sterlitech Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you