continuous particulate analyzer Articles

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Study of polycyclic aromatic hydrocarbons in atmospheric particulate matter of an urban area with iron and steel mills

    Polycyclic aromatic hydrocarbons (PAHs) were analyzed from ambient air particulate matter ...


    By John Wiley & Sons, Ltd.

  • Sulfur Compounds Analyzer MEXA-1170SX

    The MEXA-1170SX is a continuous gas analyzer for sulfur compounds existing in engine emissions. It can measure SO2 concentration and the amount of total reduced sulfur compounds (TRS), such as H2S, separately. It can also measure the total sulfur compounds (TS) that contains both gaseous compounds and liquid compounds in PM, such as SO3. By utilizing ultra-violet fluorescence (UVF) method and ...


    By HORIBA Europe GmbH

  • FTIR gas analyzers support management of fire at UK waste facility

    The capability to convene a multi-agency Air Quality Cell (AQC) was established in England in 2009 following the Buncefield Oil Storage Depot incident. A review of this event identified the need to rapidly co-ordinate the acquisition, analysis and interpretation of air quality data in major incidents.  Arrangements have been made in England to bring together experts from the Environment ...


    By Gasmet Technologies Oy

  • State of Oregon acquires CEREX micro hound multi-gas analyzers for hazmat first responders

    Abstract: "During the overhaul phase of a structure fire, firefighters commonly doff their self contained breathing apparatus SCBA protection for easier working conditions and traditionally rely upon carbon monoxide (CO) detection as the determinate for this action. A CO level of below 35 ppm has traditionally been the acceptable limit for firefighters to wear this lesser level of ...

  • Reaching Euro VI emissions limits

    The requirements of low and lowest detectable exhaust analysis has prompted Eco Physics to launch a broad range of analyzers for NO/NOx detection. Emissions tuning is one of the targets of the EURO VI regulations as well as US EPA 2010, which are: Reduction of Particulate Matter (PM) and reduction of Nitrogen Oxides (NOx). In the past 15 years – since the first European regulation for exhaust ...


    By ECO PHYSICS INC.

  • Helium gas for nuclear reactors case study

    Application Moisture is measured in helium gas used for nuclear reactors. The helium is used as a reactor coolant because of its excellent thermal properties and chemical inertness. Problem If the helium becomes contaminated with moisture, it will cause both degradation of graphite rods and an undesired change in the process's heat balance. At worst, a ...

  • Hydrogen annealing ovens case study

    Application Moisture is measured in hydrogen annealing ovens. Problem Hydrogen gas is used in annealing furnaces manufacturing stainless steel and other metal parts. High-moisture concentrations in the hydrogen will oxidize the metal, resulting in an unusable product with a surface finish that is too dark. Equipment Any ...

  • `Evaluation of Strategies for Mercury MACT Compliance,` presented at the Coal-Gen 2004 conference

    Introduction On December 15,2003, the United States Environmental Protection Agency (U.S. EPA) proposed a rule with two alternatives to permanently reduce mercury (Hg) emissions from power plants. Under one alternative, which is the focus of this paper, the utilities would install controls known as Maximum Achievable Control Technologies (MACT) under section 112 of the Clean Air Act (CAA). ...


    By Trinity Consultants

  • EVALUATION OF STRATEGIES FOR MERCURY MACT COMPLIANCE

    On December 15, 2003, the United States Environmental Protection Agency (U.S. EPA) proposed a rule with two alternatives to permanently reduce mercury (Hg) emissions from power plants. Under one alternative, which is the focus of this paper, the utilities would install controls known as Maximum Achievable Control Technologies (MACT) under section 112 of the Clean Air Act (CAA). The proposed rule ...


    By Trinity Consultants

  • Case study - Bakery ethanol

    Overview A bread and bun bakery was faced with installing air pollution control equipment to control the volatile organic compounds (VOCs) emitted during their baking process. The local regulatory agency requires bakeries that generate over 25 tons of ethanol per year to reduce emissions by 95% by installing control devices on their ovens. The airstream that needed to be treated included ...

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • Creating Harmony From Dissonance in Model Development: A Business Approach

    Dispersion model development is characterized by a relatively low cost to develop a model, followed by an enormous cost to validate the models under a variety of conditions. Since harmonization in Europe is more of a “bottom up” phenomenon—contrasted to the “top down” approach in the United States— building a framework for model use and development is essential. There will be two essential parts ...

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Monitoring - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Energy Savings on Process Heating Units Case History

    The Customer This specialty chemical company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The Project The company was increasing the ...

  • Facilitating compliance with consent decree requirements using an EMIS

    In late 2008, T3, a division of Trinity Consultants, developed an environmental management information system (EMIS) to manage “near real-time” emissions data at a petroleum refinery. The system is designed to support Consent Decree requirements for compliance demonstrations with air quality regulations at the facility. Functionality delivered includes advanced data gathering, ...


    By Trinity Consultants

  • Guide for developing a multi-metals, Fence-line monitoring plan for fugitive emissions using x-ray based Monitorsa case study

    Airborne metals and metal compounds are of particular concern to human health. Not only are they included in the United States (U.S.) Environmental Protection Agency’s (EPA) list of 187 hazardous air pollutants (HAPs), they represent 8 of the 33 urban pollutants identified by the EPA as posing the greatest potential health threat in urban areas. This is particularly significant since 80% of ...


    By Cooper Environmental

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you