continuous total hg monitoring Articles

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • Field demonstration of a near-real-time multi-metals ambient fence line monitor case study

    National emissions standards for hazardous air pollutants (HAPs) are required under Section 112 of the Clean Air Act to limit the release of specified HAPs. Permitting, monitoring and enforcement of these emission limits are an integral part of managing air quality to protect human health and the environment. However, this is difficult and highly uncertain in the case of fugitive emissions ...


    By Cooper Environmental

  • EPA Proposed “Franken-MACT” for Utilities

    EPA published the highly anticipated proposed Maximum Available Control Technology (MACT) Standard for the utility sector (40 CFR 63 Subpart UUUUU). When considered together with the growing list of proposed and final rules impacting the utility sector (Transport Rule/Cross-State Rule, Coal Combustion Byproducts Rule, Cooling Water Intake Rule, Regional Haze Rule, revised National Ambient Air ...


    By Trinity Consultants

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Proposed boiler MACT sets aggressive emission limits

    On June 4, 2010, U.S. EPA proposed National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions.  EPA proposed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater ...


    By Trinity Consultants

  • Cementing the PC MACT

    On September 9, 2010, the U.S. EPA promulgated the final amendments to the National Emissions Standard for Hazardous Air Pollutants from Portland Cement Manufacturing Industry (40 CFR 63 Subpart LLL), also known as the PC MACT. EPA’s self-proclaimed “historic” rulemaking includes some important implications for cement manufacturers and other sources that may be subject to ...


    By Trinity Consultants

  • Mercury Analysis

    Characteristics of Mercury What is Mercury? Mercury is a naturally occurring silver-colored metallic element noted for its occurrence as a liquid at room temperature and toxic to living organisms. This silvery, opaque liquid metal is very dense, yet has a high surface tension that causes it to form tiny perfect spheres in the pores of the rocks it is found in. It is ...


    By HORIBA Europe GmbH

  • EPA finalizes boiler NESHAP

    EPA published the final National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions. EPA developed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater than 25 tpy of ...


    By Trinity Consultants

  • EPA mercury rules: Keeping the lights on while removing toxics from our air

    Next week the U.S. Environmental Protection Agency is expected to finalize new rules to reduce mercury and other toxic air emissions that will affect dozens of antiquated power plants currently operating without pollution controls. These rules have stirred debate in some circles as to whether retrofitting or retiring outdated plants will cause shortfalls in electricity capacity. How will new EPA ...

  • Air quality in Europe - 2014 report

    Despite considerable improvements in the past decades, Europe is still far from achieving levels of air quality that do not pose unacceptable risks to humans and the environment. Air pollution is the top environmental risk factor of premature death in Europe; it increases the incidence of a wide range of diseases and has several environmental impacts, damaging vegetation and ecosystems. This ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you