cooling tower screen Articles

  • Cooling tower for Chemical processing plant - case study

    This chemical processing plant needed clean, debris-free water for cooling purposes. We created custom traveling water screens for their cooling tower that are compact and efficient. Smaller mesh sizes can catch fine debris for a this type of installation. No matter what architectural or engineering constraints, we’ll create a water screen solution that fits. This project included: ...


    By International Water Screens

  • AZUD LUXON filters for Cooling Towers applications

    AZUD LUXON screen filters are especially suitable for cooling towers applications, due to advantages as the minimal backwashing water needs, its low pressure loss, its small footprint, its high capacity for organic and solid particles removal and less maintenance labors. AZUD LUXON filters are made of carbon steel (housing), stainless steel (filtering element) and are suitable to work at ...


    By Sistema Azud, S.A.

  • It’s Time to Rethink Cooling Tower Filtration

    ABSTRACTThe dissipation of ambient or process heat in large HVAC systems, manufacturing facilities, power generation plants, refineries, metal mills and forges, chemical plants and food processors is most often accomplished by cooling towers. These simple structures facilitate the transfer of unwanted energy (heat) from a transport liquid (usually water) to the atmosphere. The bane of cooling ...

  • Hot weather on its way ... Check the condition of your cooling tower

    The approach of summer is a good time to check the performance and, more importantly, the physical condition of your cooling towers. After all, it’s easier to repair a tower when weather conditions don’t put a strain on its cooling capacity. A cooling tower passes air over tiny droplets or the exposed surface of a water film. In both cases, a small amount of water is vaporized, ...


    By Evapco Inc.

  • Reclaimed Municipal or Industrial Wastewater for Power Plant Cooling & Boiler Feed Make-Up Water

    For centuries, water was considered a commodity product and used with little or no restriction. In today’s modern society, water is now being considered a precious resource and considerable effort is put into protecting, recycling, and restricting its use freely. State and Federal agencies have put in place guidelines and regulations restricting its use, especially for industrial use. ...

  • Smoke Factory Chooses Automatic Self Cleaning Filter for Efficient and Effective Chiller Protection

    BACKGROUND Cooling towers dissipate both ambient and process heat in most large manufacturing facilities.  These structures facilitate the transfer of unwanted energy (heat) from a transport liquid (usually water) to the atmosphere.  Problems with efficient heat transfer, equipment protection and pathological risks to employees can most often be traced back to an issue with suspended ...


    By Orival, Inc.

  • Gettysburg hospital addresses ailing evaporative coolers

    WellSpan Gettysburg Hospital was looking to modernize mechanical systems to ensure reliability of critical patient-care functions. Constructed in 1921, WellSpan Gettysburg Hospital in Gettysburg, Pa., has undergone a number of changes over the years. According to Joe Lehigh of the facility’s engineering team, the most recent were made chiefly to improve hospital operations. “The key ...


    By Evapco Inc.

  • Membrane Bioreactor for Water Mining in New York City

    The Facility The Helena, which opened in late 2005, is an apartment building that offers more than amenities, views, and nice finishes. Behind the $100 million tower’s gleaming glass and metal skin is a serious high-performance building. Its owner and designers say the Helena will annually use 65 percent of the energy and one-third of the potable water of comparable ...


    By Dynatec Systems Inc.

  • New trends in oil refinery wastewater reclamation

    Six of the ten largest companies in the world are Oil Companies. This fact would support the argument that there may be no industry more competitive than the Oil Industry.  Within the Oil Companies, the toughest challenges lie within the Refining Divisions. Extreme pressures exist to expand capacities, to produce products which generate market advantages, to improve upon environmental ...

  • The design of static mixer heat transfer equipment for adhesives, sealants, resins and polymers.

    The fluids handled within the adhesives and sealant industries are amongst the most difficult to handle of any in the main process industries globally. The characteristics which make them particularly difficult to handle include: High viscosities (typically 1-2000 Pa.s, or 1000 to 2 million cP). Often non-Newtonian (viscosity is not constant and varies with shear rate). Some ...


    By National Oilwell Varco

  • PetroSense hydrocarbon sensors and their applications

    The increasing concern about hydrocarbon contamination of process water and produced water has created an increasing need for in-situ, real time, and accurate low cost instrumentation that can provide rapid detection and easily usable in the field. PetroSense sensors [1,2] represents “best in breed” technology for the detection of total petroleum hydrocarbons (TPH). PetroSense sensors ...


    By PetroSense, Inc

  • Project profile - McGraw Hill, East Windsor, NJ iron & manganese removal system

    Background In late 2007, AdEdge began working with Maser & Associates to assist with design and implementation of an iron and manganese removal system to serve the water supply for the McGraw Hill data center in East Windsor, New Jersey. The site had an existing groundwater supply well with unacceptably high levels of iron and manganese to serve as feed water for the facilities ...

  • Coke Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Mason OH case study

    Growing with the Flow Population increase forces Mason, Ohio, to examine biosolids handling process Located in southwest Ohio, between the cities of Cincinnati and Dayton, is the growing metropolis known as Mason. Founded in 1815, Mason has attracted large corporations such as Cintas and Procter & Gamble’s Health Care Research Center. Additionally, on the ...


    By Komline-Sanderson

  • New Energy BFP case study

    Clarification and Dewatering Control Industrial TSS The New Energy Corporation facility in South Bend IN produces 380,000 M3 per year (100 million gallons per year) of ethanol from corn feedstock. It also produces about 272,000 tonnes per year (300,000 tons per year) of carbon dioxide and 299,000 tonnes per year (330,000 tons per year) of distillers' dried grains with solubles (DDGS) ...


    By Komline-Sanderson

  • Sewer mining to supplement blackwater flow in a commercial high-rise Australia-Sydney case study

    Project Background or Rationale Australia’s warm climate and habitual droughts have resulted in innovative water conservation practices in commercial developments, such as 1 Bligh Street in Sydney. Commissioned in May 2011, the highly acclaimed 29 story office tower overlooking the Sydney Harbor captures nearly 100 percent of its wastewater and reuses it in the building. By recycling ...

  • TCE Source Area Remediation at a Former Manufacturing Facility Confidential Client – Western Connecticut - Case Study

    Project Summary TRS Group, Inc. (TRS), as a subcontractor to AECOM, completed a Standard Fixed Price Remediation (SFPR) of trichloroethene (TCE) in groundwater in Western Connecticut using Electrical Resistance Heating (ERH). The objective of the ERH project was to achieve the prescribed remediation goal for dissolved TCE in groundwater within the treatment volume. The system ...


    By TRS Group, Inc.

  • Bioremediation of Effluent the Pulp and Paper Industry

    The treatment of industrial effluent from the paper manufacturing facilities in British Columbia is a major concern because the effluent is discharged into prime salmon habitat in the marine environment (Cross, 1994). High levels of biological oxygen demand (BOD) in the effluent reduce the dissolved oxygen (DO) available to species in the marine environment. In 1988, the Federal Department of ...


  • Solvent Recovery System Keeps Presses Rolling at World`s Largest Gravure Printing Plant

    When QUAD/GRAPHICS Inc. entered the publication gravure printing market, it followed the axiom of Daniel Burnham, the 19th century architect and urban planner, to 'make no small plans.' In 1985, the Pewaukee, Wis.-based printing company purchased two 96-inch web, eight-color, high-speed presses and installed them at its new printing plant in Lomira, Wis., near Milwaukee. Conventional wisdom at ...


    By AMCEC Inc.

  • Overview of seawater desalination status and challenges

    Introduction World oceans contain over 97.2% of the planet’s water resources. Because of the high salinity of ocean water and the significant costs associated with seawater desalination most of the global water supply has traditionally come from fresh water sources – groundwater aquifers, rivers and lakes. Today, however, changing climate patterns combined with population ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you