cooling water flow monitoring Articles

  • Monitoring Oil in Cooling Water - Case Study

    The Situation A municipal power plant in the southern United States operates more than 10 stationary power plant engines capable of producing 52 megawatts of electric power. The plant is part of a larger statewide power grid system. Within the grid, the municipality brokers the purchase or sale of power hourly, based on the needs of municipality and the market rate for power on the grid ...

  • Monitoring once through cooling water - Case study

    The Situation Power plants and paper mills use service water loops and mill water loops respectively for the cooling of lubricating, hydraulic, turbine and transformer oil.  These cooling systems feature large, recirculating volumes of water which are treated with biocides, dispersants, and corrosion inhibitors. By comparison, refineries often ...

  • How to Save with Cooling Tower Credits

    Cooling towers dissipate heat from recirculating water used to cool chillers, air conditioners, or other process equipment to the ambient air. Heat is rejected to the environment from cooling towers through the process of evaporation. Therefore, by design, cooling towers use significant amounts of water. The thermal efficiency and longevity of the cooling tower and equipment depend on the proper ...


    By WaterSignal

  • Common Cooling Tower Water Treatment Problems and How to Solve Them

    For companies using cooling towers to remove heat from an industrial process or for cooling large buildings, there are several issues that can surface during the cooling tower water treatment process that we see on a regular basis. Because these issues occur often, it’s important to know what to look out for in advance, perhaps saving you some time and resources down the line. ...


    By SAMCO Technologies, Inc.

  • Performance monitoring & troubleshooting with a new individual condenser tube circulating water flow and fouling (ClA/FF) meter - case study

    Introduction Midwest Generation Joliet Station in Illinois has two coal-fired units, Unit 7 and Unit 8. Roth 550 MW units are located on the Des Plaines River and have been in operation since 1963-1964. The circulating water system is a once-through system comprised of a bar rack, traveling screens, circulating water pumps and reversible condensers. The original condenser tubes on Unit ...


    By Intek, Inc.

  • Maintenance tips for cooling towers - White Paper

    Cooling towers are prone to the typical causes of rotating machine failure such as misalignment, but also face a range of specific environmental challenges, including high or gusting wind speeds, dust, sand and, in coastal locations, high concentrations of salt. In the 1990s, for example, vibration and accelerated wear caused a fan blade to shear off a cooling tower in Pennsylvania, ...


    By Hansford Sensors

  • How to Increase Your Industrial Cooling Tower Efficiency

    Although cooling towers are generally some of the most cost-effective cooling mechanisms as compared to other cooling technologies (such as many dry air cooling systems), it is still important to monitor your industrial cooling tower efficiency and run it as seamlessly as possible. This will ensure your facility can: Save energy Reduce the amount of ...


    By SAMCO Technologies, Inc.

  • A Guide to Oil in Water Monitoring for Environmental Compliance

    Applications for industrial oil in water monitoring can vary greatly. In upstream and midstream oil and gas production applications, monitoring separation efficiencies is key to optimize production rates, preventative maintenance, chemical use, flow, and environmental compliance. Separated water from the oil is called produced water and it must be cleaned of oil before disposal or ...


    By Arjay Engineering Ltd.

  • How Do You Know If You Need a Cooling Tower Water Treatment System for Your Plant?

    In order to keep your production flowing smoothly and avoid costly damage to your cooling tower equipment, the proper treatment of your cooling tower water is essential. If cooling tower water is not properly treated, organic growth, fouling, scaling, and corrosion can reduce plant productivity, cause plant downtime, and require costly equipment replacements down the road. ...


    By SAMCO Technologies, Inc.

  • Radiation Water Monitor in Real-Time and Continuous at Jefferson NL 2006

    Jefferson National Laboratory is a high tech laboratory located on a beautiful campus in suburban Virginia. Their research is centered on their high-energy electron accelerator. Energies generated are as high as 6 Gev continuous with currents up to 200 micro Amps. Where does the high-energy accelerator beam go after smashing atoms in the experimental sample? It impacts into a tank of purified ...


    By Technical Associates

  • Case study - Water quality monitoring and weather data at Pampulha Lake-Brasil

    In 2010, OTT Hydromet's partner in Brasil,  Hexis began working with CETEC. This resulted in the installation of a buoy, equipped with an automatic profiling system, in early 2013. The project’s objective is the continuous monitoring of the lake’s water quality, with focus on improving this by the 2014 World Cup Games.  Adcon, Lufft and OTT technologies (Hydrolab DS5X ...

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Europe Limited

  • Flow Rate Measurement in Full Pipes Using the Transit Time Method

    Particularly in large diameters the relevance of water volume measurement is growing. The challenge with cooling water or fresh water processes is to generate accurate flow recordings or to document and to control individual consumptions and withdrawal quantities. Flow detection, however, particularly in large diameters is highly demanding. In such cases the transit time measurement thanks to its ...


    By NIVUS GmbH

  • Sewer mining to supplement blackwater flow in a commercial high-rise Australia-Sydney case study

    Project Background or Rationale Australia’s warm climate and habitual droughts have resulted in innovative water conservation practices in commercial developments, such as 1 Bligh Street in Sydney. Commissioned in May 2011, the highly acclaimed 29 story office tower overlooking the Sydney Harbor captures nearly 100 percent of its wastewater and reuses it in the building. By recycling ...

  • Watson-Marlow OEM pumps help meet rising demand for chlorine monitors

    A specialist manufacturer of water quality measurement and monitoring systems is using peristaltic pump technology from Watson-Marlow Fluid Technology Group for use in chlorine monitoring equipment after similar pumps were found less reliable. With customers that include water, industrial and pharmaceutical companies, Analytical Technology Inc (ATI) designs and manufactures its products in ...

  • Wastewater Plant Relies on Thermal Flow Meter for Co-Gen Power Gas Blending Process

    The Rahway Valley Sewerage Authority (RVSA), which operates a large wastewater treatment plant in New Jersey, embarked on a green co-generation waste-to-energy project to power a portion of its operations. The plant performs primary, secondary, tertiary and sludge treatment processes in serving over 250,000 residential customers and 3000 industrial and commercial customers in a 40-plus square ...


    By Modern Pumping Today

  • 5 ways to conserve water this winter

    Water conservation is something we harp on during the summertime, but what about during the winter? When the irrigation systems shut down, it’s easy to put conservation on the back burner while indoor water waste continues to occur. According to the U.S. Geological Survey, the average person uses 80-100 gallons per day for everything from cooking, to showering and flushing the ...


    By WaterSignal

  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • Ten Ways to Conserve Water This Holiday Season

    The holiday season is almost here, which to us at WaterSignal means even more opportunities to conserve water! As you gear up for the holidays, save water and money with these ten water saving tips: 1.) Buy recycled paper products: Products made from 100 percent recycled paper require much less water in their manufacturing than those made from virgin paper. 2.) Inspect bathroom ...


    By WaterSignal

  • Genesee county waste water drain commission

    Michigan county selects a Cornell pump for its new pump station. Genesee County, where Flint, Michigan is located, had an issue with their wastewater Pump Station No 1. Employing a vertical line shaft and dry pit pump design, the station was becoming increasingly expensive to maintain and operate. Adding to maintenance issues were the pump station’s age and ...


    By Cornell Pump Company

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you