coring tube Articles
-
What are Core Samplers?
A core, in marine research, is a cylindrical section taken from sediments underlying a water body. Core samplers, the instruments used to obtain cores, range from the simple to the complex. The variety of corer types reflect the breadth and variety of marine research. For example, the simplest corers are hand-operated types used in shallow waters to collect sediment cores containing fauna. ...
-
Bright Annealed Tubes
Product description Bright Annealed Tubes Description The traditional annealing approach is performed in a so referred to as open furnace, where the atmospheric oxygen reasons scaling of the heat treated materials, which makes the surface rough. HUASHANG STEEL has developed a one of a kind bright annealing process, the heat treatment is carried out in a so-called clsoed furnace. The warmth ...
-
Bright Annealed Tubes
Product descriptionBright Annealed Tubes DescriptionBright annealed stainless steel tube is a kind of high precision steel tube material after finishing or cold rolling. Due to the advantages of no oxide layer both inside and outside wall, no leakage under high pressure, high precision, high finish degree, no deformation and flaring, no cracks flattening, precision bright annealed tube is mainly ...
-
Small-increment electric soil sampler
Measurement of soil bulk density and volumetric water content in small (2-cm) depth increments is tedious and time consuming. Most methods require compositing several subsamples to control measurement error, and few are feasible with loose, dry soils. We developed and tested a sampler that uses an electric linear actuator to push an intact soil core out of the sampling tube. The soil core is ...
-
Cardboard Core Baling Solution
Cardboard cores, often referred to as cardboard tubes, are cylindrical paper products used in a broad range of industrial and commercial applications. As a waste product, they are often difficult to store, transport, and bale. Now, with fewer quantities being shipped overseas for recycling, business owners are struggling with how to deal with this unique ...
-
Production method of tantalum tube
There are several types of tantalum pipe, such as extruded pipe, rolled pipe, drawn pipe, spinning pipe and welded pipe. The production methods of tantalum tube blanks mainly include extrusion, sheet spinning and strip welding. The finished tantalum tube production methods mainly include rolling, stretching and spinning. Rolled pipe Tantalum tubes are usually cold rolled, including two-roller ...
-
Shanghai Laogang Leachate Treatmeng Plant
Shanghai Laogang landfill site is the biggest landfill site in China even in the whole world, its daily waste treatment capacity is over 10 thousand tons, Jiarong Technology has provided two sets of wastewater treatment system (DTRO+STRO) to this site, the processing capacity are 800tons/d and 200tons/d.We are a specialist in industrial membrane separation process. The core technology of Jiarong ...
-
Linhai Landfill Leachate Treatment Project
Linhai Songshan Landfill Leachate Treatment Project is Jiarong's typical application case of landfill leachate treatment which adopted Jiarong Two-stage DTRO system, its treatment capacity is 220m³/d, it has been stable running more than 3 years since the installation and operation in 2015.We are a specialist in industrial membrane separation process. The core technology of Jiarong Includes ...
-
Guangdong Yangxi Power Plant Desulfurization Wastewater Treatment Project
Processing scale: 48 tons/hour Treatment process: DTRO + STRO Project features: The project adopts DT&ST integrated high-density concentration process, with less concentrate production, low operating cost, investment cost 15% lower than the full DTRO process, and high system reliability. Jiarong- headquartered in Xiamen, China- was founded in 2005. We are a specialist in industrial ...
-
Sheqi Leachate Treatment Project in Henan
Capacity:100m³/d, containerized leachate Treatment Equipment(2 stages DTRO)Jiarong- headquartered in Xiamen, China- was founded in 2005. We are a specialist in industrial membrane separation process. The core technology of Jiarong includes Disk-tube RO membrane system, Spiral-tube RO membrane system, Tubular UF membrane system and Micro-tube NF/RO membrane system etc. The main application fields ...
-
Hunan Loudi Wastewater Treatment Project
Capacity: 200tons/day (containerized leachate treatment equipment double stage DTRO)Influent water quality:CODcr≤20000mg/L, BOD5≤12000mg/L, SS≤500mg/L, TN≤2000mg/L, NH3-N≤2000mg/L, Conductivity≤35000us/cm, temperature: 15-35℃,pH: 6-9Effluent water quality/discharge standard:CODcr≤100mg/L, BOD5≤30mg/L, SS≤30mg/L, TN≤40mg/L, NH3-N≤25mg/L, TP≤3mg/LWe are a specialist in industrial membrane ...
-
Luoyang Leachate Treatment Project
Capacity: 500m³/d Process: MBR+NF+RO+DT The effluent water quality meets the discharge standard. Jiarong- headquartered in Xiamen, China- was founded in 2005. We are a specialist in industrial membrane separation process. The core technology of Jiarong includes Disk-tube RO membrane system, Spiral-tube RO membrane system, Tubular UF membrane system and Micro-tube NF/RO membrane system etc. ...
-
Henan Minquan District Leachate Treatment Equipment
Capacity: 200*2m³/d containerized leachate treatment equipment (2 stages DTRO) Jiarong- headquartered in Xiamen, China- was founded in 2005. We are a specialist in industrial membrane separation process. The core technology of Jiarong includes Disk-tube RO membrane system, Spiral-tube RO membrane system, Tubular UF membrane system and Micro-tube NF/RO membrane system etc. The main ...
-
Lushi Wastewater Leachate Treatment Project
Capacity:50m³/d, containerized leachate Treatment Equipment(2 stages DTRO) Jiarong- headquartered in Xiamen, China- was founded in 2005. We are a specialist in industrial membrane separation process. The core technology of Jiarong includes Disk-tube RO membrane system, Spiral-tube RO membrane system, Tubular UF membrane system and Micro-tube NF/RO membrane system etc. The main application ...
-
Henan Luohe Leachate Treatment Project
Capacity:200m³/d, containerized leachate Treatment Equipment(2 stage DTRO) Jiarong- headquartered in Xiamen, China- was founded in 2005. We are a specialist in industrial membrane separation process. The core technology of Jiarong includes Disk-tube RO membrane system, Spiral-tube RO membrane system, Tubular UF membrane system and Micro-tube NF/RO membrane system etc. The main application ...
-
Henan Landfill Leachate Treatment Project
Capacity:200m³/dProcess: Containerized leachate treatment equipment, 2 stages of DTROInfluent water quality: Ammonia nitrogen1750mg/L, TN 2000mg/L, COD 9870mg/LEffluent water quality meets the discharge standard.Jiarong- headquartered in Xiamen, China- was founded in 2005. We are a specialist in industrial membrane separation process. The core technology of Jiarong includes Disk-tube RO membrane ...
-
What kind of service Jiarong provide?
Jiarong- headquartered in Xiamen, China- was founded in 2005. We are a specialist in industrial membrane separation process. The core technology of Jiarong includes Disk-tube RO membrane system, Spiral-tube RO membrane system, Tubular UF membrane system and Micro-tube NF/RO membrane system etc. The main application fields cover leachate treatment, difficult wastewater treatment, flue gas ...
-
Henan Shangqiu Landfill Leachate Treatment Project
Capacity: 300m³/d Process: Containerized Leachate Treatment Equipment, 2 stages of DTRO Influent water quality: NH4+-N≤2500mg/L, TN≤3000mg/L, COD≤10000mg/L Effluent water quality meets the discharge standard. Jiarong- headquartered in Xiamen, China- was founded in 2005. We are a specialist in industrial membrane separation process. The core technology of Jiarong includes ...
-
Angola Leachate Treatment Project
Jiarong has applied its high concentrate technology overseas to help Customer in Angola to reduce the wastewater discharge and the produced water was fully met the local discharge standard. Capacity:30m³/day Influent water quality BOD≤12000mg/L COD≤20000mg/L TSS≤1000mg/L NH4<2000 mg/L Conductivity≤25000us/cm pH 6-9 Temperature 5-40℃ Effluent water quality BOD≤40mg/L ...
-
Automatic EDM Notch
Automatic EDM equipment is the ideal equipment for processing artificial defects of pipe rod standards in non-destructive testing work. The flaw detector has the characteristics of simple operation, safety and reliability, high production precision, fast processing speed, and convenient carrying by ultrasonic flaw detection. It can process artificial defects on non-ferrous metals and ferrous ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you