corrosion control system Articles

  • The Next Generation of Level Control

    Water is an essential resource for everyday life, and thus having a way to store and distribute water is of critical importance. Water storage tanks have been designed to compensate for varying water demands during high and low ...


    By Singer Valve Inc.

  • What`s the Best Air Pollution Control Technology for My Process?

    Air pollution control equipment is not something that business owners address by saying, “Let’s do the right thing for the environment and install an oxidizer!” In fact, the scenario is more likely to be “We need to increase productivity (always a good thing!), but that will put us over our annual emissions limits. Do we know what we will need? Where do we start? Who can ...

  • Corrosion Control in data Center

    CORROSIVE GASES: Small concentrations, serious consequences EU standard 2002/95/EC, or RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), which was implemented in July 2006, restricts the use of hazardous substances in the manufacture of electrical and/or electronic equipment. One of the banned substances is lead (Pb), which is used for soldering ...


    By Bioconservacion SA

  • Corrosion Control in data Centers

    EU standard 2002/95/EC, or RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), which was implemented in July 2006, restricts the use of hazardous substances in the manufacture of electrical and/or electronic equipment.   One of the banned substances is lead (Pb), which is used for soldering circuit boards and other components in hard disks, ...


    By Bioconservacion SA

  • Corrosion Inspection

    Everything made of metal is susceptible to corrosion and can effect every non-service industry to one degree or another by the direct or indirect costs of corrosion prevention, mitigation or repair. The VJ-Advance (VJ-ADV) video borescope was used to take images above. The VJ-ADV is the ideal choice for any technician involved in corrosion control. No other borescope offers this level of ...


    By RF System Lab.

  • LED Applications for Oil and Gas Refining and Processing

    Oil and gas processing facilities are unsafe due to the existence of hazardous compounds during operations. When addressing such issues, companies in the sector may deploy explosion proof lighting systems to prevent the ignition of sparks created from the electrical equipment. The adoption of LED technology in oil and gas refineries has helped reinforce key safety measures associated with ...


    By Larson Electronics LLC

  • Case histories of using tin technology to control corrosion in water systems

    Stannous chloride is an alternative corrosion control in aqueous systems. Stannous chloride’s effectiveness as a better corrosion inhibitor has been demonstrated in both municipal drinking water and industrial cooling water applications and its use has a reduced impact on rivers and streams. Orthophosphate and other phosphate compounds are the most common treatments for reducing corrosion in ...


    By AS Inc

  • Impact of Corrosion on Electronic Equipment

    Corrosion is the destruction of metals through reaction with compounds in their environment. It is a natural process because compounds such as oxides, sulphides and chlorides are formed and these are stabler than pure metals. Electronic circuits and components are omnipresent in our environment. Until recently, the thousands of soldered joints that an electronic circuit contains were ...


    By Bioconservacion SA

  • No more odor and corrosion case study

    Sewer systems are vulnerable to corrosion and, at times, can be the source of unpleasant odors. Kemira’s new H2S-Guard tackles both problems, as in most cases the source of these issues is hydrogen sulphide, forming in septic areas, in other words areas where no oxygen for metabolic reactions is available. The H2S-solution combines three important steps: measurement, monitoring and control ...

  • Odor control ventilation system, from corrosion composites, used in Owatonna waste water plant

    Application Spotlight Location: Owatonna Waste Water Plant, Minnesota Midwest Mechanical Solutions - Monoxivent Sales Representative Summary: Owatonna is a city in southern Minnesota with a population of approximately 25,000 located about an hour south of Minneapolis. Legend has it that Princess Owatonna, the sickly daughter of Chief Wabena of the Dakota ...


    By Monoxivent

  • Case study - Corrosion protection in a pulp and paper industry

    It is widely accepted that corrosion has an important economic impact at an industrial scale. As an example, results of a study carried out in the US showed that the total annual estimated direct cost of corrosion in the country was $276 billion, which was approximately 3.1% of the nation’s Gross Domestic Product (GDP). Thus, within the last few decades, an important effort has been made to ...


    By Bioconservacion SA

  • VISCOTAQ for Corrosion Earns `9 out of 10` rating

    Since 1986, InduMar Products (short for Industrial Marine) has been providing innovative solutions for pipe repair, pipe and container remediation, and corrosion control. Our ...


    By InduMar Products, Inc.

  • Humid, corrosive and malodorous waste gases - Case Study

    Example: Production of bio-ethanol Similar tasks: Dryers, Fibre board industry The production of bio-ethanol - fermentation, distillation, pelleting and drying - generates odorous and humid waste gas. Upstream lamellar demisters reduce both drop formation - causing lower VOC destruction efficiency - and solid matters. The regenerative thermal oxidiser (RTO) ...

  • Full-scale field trials identify sulfate discharge limits for municipal wastewater odor and corrosion control

    ABSTRACT The Massachusetts Water Resources Authority (MWRA) owns and operates one of the largest wastewater collection and treatment systems in the U.S. serving 45 member communities and operating the 1.2 billion gallon-per-day Deer Island Wastewater Treatment Plant in Boston Harbor. The MWRA has very few odor and corrosion problems so it was unusual when the MWRA encountered a high ...

  • Hydrogel-swelling driven delivery device for corrosion resistance of metal in water

    Corrosion on steel and copper pipes in industry can trigger pollution and weakness due to undesired chemical and biochemical reactions. Too much or too little inhibitor can decrease its efficiency, even causing waste and pollution. In this contribution, an innovative delivery device driven by hydrogel swelling, mainly consisting of a semi-permeable membrane, a hydrogel-swelling force drive and ...


    By IWA Publishing

  • Case study - Safety, Protection against corrosion and cabinet pressurisation in refineries

    The environment in a refinery is highly corrosive. This makes it necessary to deploy control systems not only to protect staff but also to protect the equipment controlling the processes, in order to ensure their reliability. Bioconservacion has equipment that is specially designed for the safety of staff, and for protecting against corrosion in control rooms and cabinet pressurisation equipment. ...


    By Bioconservacion SA

  • Utilization of artificial recharged effluent as makeup water for industrial cooling system: corrosion and scaling

    The secondary effluent from wastewater treatment plants was reused for industrial cooling water after pre-treatment with a laboratory-scale soil aquifer treatment (SAT) system. Up to a 95.3% removal efficiency for suspended solids (SS), 51.4% for chemical oxygen demand (COD), 32.1% for Cl− and 30.0% SO42− were observed for the recharged secondary effluent after the SAT ...


    By IWA Publishing

  • Hydroflo diaphragm pumps help reduce boiler corrosion and maintenance costs

    ABTCo, located in Alpena, Michigan, is a decorative wood paneling producer using three boilers to generate 7 MW of electricity – half the power needed in the plant plus steam for pulp processing. As in many boiler operations, the main enemy is corrosion, which can destroy system components and lead to boiler failure. Although internal boiler surfaces are protected by a film of magnetic ...


    By Aquflow

  • Combating Corrosion - Committee G01 Standards Fight Nature’s Destructive Tendencies

    The evening news may leave many of us feeling war-weary, but one ASTM International technical committee has been successful in conflict of a different sort. It’s a commonplace but epic struggle between the natural and civilized worlds — the fight against metal corrosion. For the past half-century, the weapon of choice of ASTM Committee ...


    By ASTM International

  • Hydrocarbon Processing: Non-phosphorus corrosion inhibitor optimizes cooling tower uptime for environmental compliance

    Cooling water systems play a critical role in the efficient operation of hydrocarbon processing facilities. Ensuring that these systems efficiently cool and condense the various process streams is essential to minimizing operating costs and maximizing plant performance and profitability. Common challenges to maintaining these systems at peak performance come in the form of corrosion, pitting and ...


    By Baker Hughes

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you