corrosion gauge Articles

  • Monitor Hull Corrosion with Thickness Gauge

    After our recent article about inspecting your hull paint to reduce bio-fouling and acting as an anti-corrosion method, we wanted to delve deeper into one of the biggest problems shipowners and operators face: corrosion. ...


    By Deep Trekker Inc.

  • On the Ground with Diesel Corrosion - Case Study

    When the EPA revealed the results of its study in July on the increasing presence of substantial corrosion in diesel fuel tanks, it proved that the problem is much larger than anyone anticipated. The facts are staggering: 83%of the diesel tank systems exhibited moderate-to-severe corrosion. 75%of the owner/operators of those diesel tanks had no idea it was ...


    By Tanknology Inc.

  • Monitoring DMA level case study

    ABIC, a leading provider of veterinary products chooses MonoScan to monitor the level of DMA (Dimethylamine) tank in one of its plants located in Israel. ABIC, wholly owned by Teva Pharmaceutical Industries Ltd, is Israel's largest veterinary products manufacturer. The company produces a wide range of vaccines for poultry and livestock and other animals. ABIC's plants are equipped with ...

  • Cost effective ultrasonic level measurement of Sulfuric acid case study

    Cost effective level measurement solution provided by MicroScan in one of Luxembourg Industries' Sulfuric acid tank. Luxembourg Industries, located in Israel, manufacture diverse list of products to customers in the agricultural, biotechnology, chemical, pharmaceutical and other industries. Among their products are branded crop protection products, diverse crop protection chemicals, industrial ...

  • Vertical Flow Fume Scrubbers are Suitable for Chemical Producers, Metal Finishing, Semiconductor Manufacturing and Other Operations Generating Fumes and Gases.

    Tri-Mer fume hoods are manufactured for process and laboratory use. Tri-Mer fume hoods are ideally suited for corrosive or volatile exhausts. Construction materials include polypropylene, PVC, mild or stainless steel and high-alloy materials. Standard features include a low maintenance design, 110V power operation and minihelic exhaust gauge. Fume hoods can be equipped with activated carbon or ...


    By Tri-Mer Corporation

  • Checklist for Boiler Maintenance

    Boilers play a crucial role at industrial facilities and it is imperative that they be safely and properly maintained. Routine boiler maintenance can help prevent unplanned shutdowns and outages, increase the efficiency of the boiler and cut operating costs, and ensure that the facility is in full compliance with all laws and regulations governing boiler safety. What follows is a boiler ...


    By STI Group, Inc.

  • Chemical storage buildings isolate hazardous liquids and minimize damage from spills

    The improper storage of corrosives and flammable liquids is the leading cause of spills that can result in damage to facilities and impact worker safety. One of the most effective practices to help minimize damage from chemical spills is to isolate the various chemical hazards. Since knowledge of chemical compatibility is critical, it is important to understand that there are two major types of ...


    By Interstate Products Inc

  • Level measurement of ferric chloride case study

    MonoScan provides ongoing measurement results of Ferric Chloride (FeCl3) solution in one of Israel's most advanced wastewater treatment plant. The Ashdod wastewater treatment plant has invested significantly in state-of-the-art control systems to ensure 100% usage of the wastewater entering its facilities. The plant is self sufficient, by using its own resources providing power, water and gas. ...

  • Improving steel production processes case study

    SmartScan 50 improves efficiency of steel manufacturing in Gujarat district, India. The steel corporation of Gujarat is India's leading manufacturer of metal products. The company produces hot and cold steel rolls and uses state-of-the-art technology in its plant to ensure high quality products to its clientele around the globe. The problems The hot and cold steel rolls ...

  • Casella STORM Guardian helps build flood safety and awareness - Case Study

    Casella has helped Northamptonshire County Council to raise safety and awareness in the region by supplying robust rain gauges to 15 local communities. The Casella STORM Guardian rain gauges can collect rainfall data remotely and mitigate the risk from the increasing incidence of high intensity rainfall and flash flooding. The Issue It is a common perception amongst homeowners ...


    By Casella

  • Preventive oil in a steel mill

    The Serbian Mill of U.S. Steel opts for three SmartScan50L units to provide continuous level measurement of rust preventive oil and Hydrochloric Acid (HCL). U.S. Steel Serbia primarily produces sheet products, including tin mill and galvanized products. The production process of cold sheet rolls involves various materials; each contributes differently to the final product's quality. The company ...

  • Correct Use Of Air Cooler With Elliptical Tube

    Time:8 December 2016 Click:8 Air Cooler With Elliptical Tube is a set of independent equipment and covers a small area. It can be placed indoor or outdoor according to user requirements, and connected to the equipment with a hose or a steel pipe. Water pressure can be adjusted by ...

  • Northamptonshire County Council - Storm case study

    The Issue It is a common perception amongst homeowners living away from rivers or coastal areas or when there are periods of drought and water shortages that the risk of flooding is not possible. However, the hottest and driest weather conditions are often preceded by thunderstorms or flash flooding. In urban areas, heavy rainfall over dry land with poor absorption increases run-off, ...


    By Casella

  • Case study - Anderson and Fish Creek PCCP and bar-wrapped force main assessment

    Service: SmartBall and PipeDiver Client: The City of Calgary Project Date: December 2011 Type of Pipeline: Wastewater Force Main Diameter: 750mm (30-inch) Pipe Material: PCCP and C-303 pipe Length: 12.6km The City of Calgary is currently planning to reverse the flow direction of two critical wastewater force mains in the city. The ...


    By Pure Technologies

  • Case study - The City of Calgary completes successful condition assessment and verification on C303 Pipeline

    Service: PureRobotics Client: City of Calgary Project Date: May 2013 - ongoing Location: Calgary, AB Type of Pipeline: Water Transmission Main Diameter: 30-inch (750mm) Pipe Material: Bar-Wrapped ...


    By Pure Technologies

  • Relining with corrugated steel pipe, Mississauga, ON

    Owner: Ministry of Transportation, Ontario Consultant: Morrison Hershfield Contractor: Underground Services Limited Location: Mississauga, Ontario With over 320,000 vehicles per day the intersection of Highways 401, 403 and 410 in Mississauga, Ontario, is one of the busiest in North America. At the same location can be ...


    By Armtec

  • Keeping it clean; close watch over wastewater level case study

    Osem Industries Ltd. chooses SmartScan50 to measure the level of its wastewater facility. Osem Industries LTD is one of the biggest food manufacturing and marketing companies in Israel. The group produces more than 1,000 different food items currently manufactured in ten production plants. The Sderot plant is Osem’s most-southern manufacturing point in Israel. This plant, which in the early ...

  • Selecting a pump for sea water reverse osmosis

    Reverse osmosis (RO) desalination has become a significant process used in the purification of water. Selecting the correct pump is a significant step in a well designed and properly operating pumping system. Although the pump is a relatively small part of the overall cost of an RO system, expenses resulting from downtime and inefficiency can quickly diminish the productivity of the RO system and ...


    By Cat Pumps

  • Controlling food additives level in a process tank case study

    SmartScan50 provides real time level measurement results of food additives during production for a major chemical supplier. The customer is a prominent supplier of ingredients and fine chemicals for the food, cosmetic, detergent, and pharmaceutical industries, and also specializing in the manufacture and development of Citric Acid, Citrates and Phosphates. The company invests greatly in its ...

  • Deal With The Pressure - Protect piping system components with Pulsation Dampeners

    Metering pumps with operating pressures of up to 150 psig (pounds per square inch gauge) can create unwanted pressure pulsations within a piping system – a real problem in applications such as filling, mixing and spraying that require a combination of a metering pump’s accuracy and a continuous flow. But the issue can often be addressed with Pulsation Dampeners.The Pulsation Dampeners, usually ...


    By Lutz-JESCO America Corp.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you