corrosion monitoring Articles

  • Monitor Hull Corrosion with Thickness Gauge

    After our recent article about inspecting your hull paint to reduce bio-fouling and acting as an anti-corrosion method, we wanted to delve deeper into one of the biggest problems shipowners and operators face: corrosion. ...


    By Deep Trekker Inc.

  • A quick guide to oil analysis for engine test applications

    Reliability testing is a very important component of new engine development. Engineers need to fully understand and chart the engine lifetime performance under a variety of conditions before mass production may be considered. Many important performance data parameters are collected in real time through the many different types of sensors that are connected to the engine in the test cell and oil ...


    By Spectro Scientific

  • Corrosion Control in data Centers

    EU standard 2002/95/EC, or RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), which was implemented in July 2006, restricts the use of hazardous substances in the manufacture of electrical and/or electronic equipment.   One of the banned substances is lead (Pb), which is used for soldering circuit boards and other components in hard disks, ...


    By Bioconservacion SA

  • Corrosion Control in data Center

    CORROSIVE GASES: Small concentrations, serious consequences EU standard 2002/95/EC, or RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), which was implemented in July 2006, restricts the use of hazardous substances in the manufacture of electrical and/or electronic equipment. One of the banned substances is lead (Pb), which is used for soldering ...


    By Bioconservacion SA

  • No more odor and corrosion case study

    Sewer systems are vulnerable to corrosion and, at times, can be the source of unpleasant odors. Kemira’s new H2S-Guard tackles both problems, as in most cases the source of these issues is hydrogen sulphide, forming in septic areas, in other words areas where no oxygen for metabolic reactions is available. The H2S-solution combines three important steps: measurement, monitoring and control ...

  • On the Ground with Diesel Corrosion - Case Study

    When the EPA revealed the results of its study in July on the increasing presence of substantial corrosion in diesel fuel tanks, it proved that the problem is much larger than anyone anticipated. The facts are staggering: 83%of the diesel tank systems exhibited moderate-to-severe corrosion. 75%of the owner/operators of those diesel tanks had no idea it was ...


    By Tanknology Inc.

  • Non-destructive analysis of concrete for corrosion studies using nuclear technique

    Chloride-induced reinforcement corrosion is the principal cause of deterioration of concrete structures in the Arabian Gulf and the world over. Preventive measures against corrosion require maintaining the chloride and sulphate concentration in concrete below the threshold limits specified by the standards. This requires monitoring the chloride and sulphate concentration in concrete, and a ...


    By Inderscience Publishers

  • Case study - Safety, Protection against corrosion and cabinet pressurisation in refineries

    The environment in a refinery is highly corrosive. This makes it necessary to deploy control systems not only to protect staff but also to protect the equipment controlling the processes, in order to ensure their reliability. Bioconservacion has equipment that is specially designed for the safety of staff, and for protecting against corrosion in control rooms and cabinet pressurisation equipment. ...


    By Bioconservacion SA

  • Combating Corrosion - Committee G01 Standards Fight Nature’s Destructive Tendencies

    The evening news may leave many of us feeling war-weary, but one ASTM International technical committee has been successful in conflict of a different sort. It’s a commonplace but epic struggle between the natural and civilized worlds — the fight against metal corrosion. For the past half-century, the weapon of choice of ASTM Committee ...


    By ASTM International

  • Full-scale field trials identify sulfate discharge limits for municipal wastewater odor and corrosion control

    ABSTRACT The Massachusetts Water Resources Authority (MWRA) owns and operates one of the largest wastewater collection and treatment systems in the U.S. serving 45 member communities and operating the 1.2 billion gallon-per-day Deer Island Wastewater Treatment Plant in Boston Harbor. The MWRA has very few odor and corrosion problems so it was unusual when the MWRA encountered a high ...

  • BioSense a Biofilm Monitor and Controller

    Abstract Biofilms (slime) can form on virtually every nonshedding surface, in a nonsterile aqueous environment i.e. anywhere where a water source is present; such as cooling/heating systems, swimming areas and in drinking water purification. These Biofilms can cause a myriad of problems including; harbouring harmful bacteria such as Legionella, inducing corrosion, and reducing ...


    By Sensara, SL

  • Organics Monitoring: A Practical Guide

    Preventing product loss, lowering waste treatment costs, and reducing system maintenance and energy consumption through organics monitoring in the chemical, refining, food, and wastewater treatment industries. Summary Process water and steam condensate contamination includes organic, inorganic, and biological components. Sources of organic contamination include process ...


    By GE Analytical Instruments

  • Radiation Monitors and Meters

    Light Description and Applications The light meter is a portable unit designed to measure visible, UV, and near-UV light in the workplace. (The CTC has a UV light meter available through its loan program, ALEP.) The light meter is capable of reading any optical unit of energy or power level if the appropriate detector has been calibrated with the meter. The spectral range of the instrument is ...

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • Monitoring DMA level case study

    ABIC, a leading provider of veterinary products chooses MonoScan to monitor the level of DMA (Dimethylamine) tank in one of its plants located in Israel. ABIC, wholly owned by Teva Pharmaceutical Industries Ltd, is Israel's largest veterinary products manufacturer. The company produces a wide range of vaccines for poultry and livestock and other animals. ABIC's plants are equipped with ...

  • Unique technology for monitoring piped water

    INTELLITECT WATER has launched a unique, highly innovative drinking water monitoring technology that will revolutionise the delivery of drinking water. The new technology monitors the quality of water in pipeline distribution networks and for the first time provides reliable data to protect the integrity of the water quality, to enhance customer satisfaction and to improve operational efficiency. ...


    By Intellitect Water Ltd

  • UK experience in the monitoring and control of lead in drinking water

    At the zonal scale (e.g. a city or town), random daytime (RDT) sampling succeeded in demonstrating both the need for corrective action and the benefits of optimised orthophosphate dosing for plumbosolvency control, despite initial concerns about sampling reproducibility. Stagnation sampling techniques were found to be less successful. Optimised treatment measures to minimise lead in drinking ...


    By IWA Publishing

  • Compliance to standards in continuous emissions monitoring case study

    Customer: Glass Manufacturer Application: Continuous Emissions Monitoring Service (CEMS) for Glass Manufacturing Background: A glass factory is required to ...


    By Ecotech Pty Ltd

  • Neosens™ on-line Fouling monitoring for Cooling Towers

    A New Approach to Fouling Control Neosens offers innovative, cost effective sensor solutions for monitoring the presence of biofilm and scale in cooling towers, heat exchangers and other industrial process applications. Fouling in cooling systems is a worldwide, multi-billion dollar problem, reducing energy efficiency, increasing maintenance costs and creating health risks due to ...


  • Case study - Biogas monitoring for upgraded biomethane

    By working with a range of partners worldwide, Geotech is involved in a range of projects at the cutting edge of biogas production and processing.  The recent landmark deal agreed between Marks & Spencer (M&S) and Future Biogas, a major biogas plant operator, is for the purchase of biomethane certificates. The deal sees M&S purchase 35,000 Mega-Watt hours (Mwh) of certificates, ...


    By Geotech

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you