corrosion protection material manufacturer Articles

  • Case study - Corrosion protection in a pulp and paper industry

    It is widely accepted that corrosion has an important economic impact at an industrial scale. As an example, results of a study carried out in the US showed that the total annual estimated direct cost of corrosion in the country was $276 billion, which was approximately 3.1% of the nation’s Gross Domestic Product (GDP). Thus, within the last few decades, an important effort has been made to ...


    By Bioconservacion SA

  • Advantages of Corrosion Resistant Lighting in Offshore Helidecks

    Advantages of Corrosion Resistant Lighting in Offshore Helidecks Corrosion resistant lighting must be installed in offshore helidecks due to the extreme nature of the hazardous location. The use of such luminaries can extend the lifespan of the location’s lighting system and provide safety for aircraft pilots and workers on the site. ...


    By Larson Electronics LLC

  • Combating Corrosion - Committee G01 Standards Fight Nature’s Destructive Tendencies

    The evening news may leave many of us feeling war-weary, but one ASTM International technical committee has been successful in conflict of a different sort. It’s a commonplace but epic struggle between the natural and civilized worlds — the fight against metal corrosion. For the past half-century, the weapon of choice of ASTM Committee ...


    By ASTM International

  • Leading military electrical connector manufacturer - case study

    Application The client designs and builds complex electrical connectors for salt water applications. The connectors are used in underwater communications cables and to make solid electrical connections within nuclear submarines. Each connector is housed in a durable waterproof rubber material with gold and platinum plated eluctors to optimize electrical conductivity and decrease ...


  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Water Based Damp Course Protection Chemicals: Tech-Dry Building Protection Systems

     Tech-Dry Building Protection Systems Pty Ltd has developed a range of water-based damp course chemicals for the building industry. These water-based formulations have replaced the solvent-based formulations previously used by Tech-Dry. Background Tech-Dry Building Protection Systems Pty Ltd was formed in 1982, and specialises in the development and supply of materials ...


  • Unmixing Water From Waste: The imporance of filters, cartridges and housings as a function of manufacturing

    In manufacturing, water and water-based solutions are regularly filtered for various purposes and outcomes – including for cleaning, cooling, and movement. The filtering process is crucial to quality, performance, and cost savings. With the wrong filter in place, pumps can be destroyed, liquid being filtered can become “unusable” for the intended purpose, cleaning solvents can ...


    By Shelco Filters

  • Dredge caustic and abrasive materials in South Korea-case study

    Customer: Zinc mining & processing facility, South Korea. Problem: How to remove 200,000 cubic meters of 325 mesh goethite (pH 2.2 - 2.5 range; sulfuric acid) from a lined pond with dimensions of 120m x 253m. Since the material had settled and was resting on the pond bottom, dredging was selected as the appropriate removal method. No standard acid-resistant dredge ...


    By SRS Crisafulli, Inc.

  • Two stainless steel rotomite applications - dredging caustic and abrasive materials in South Korea and Venezuela

    Customer: Zinc mining & processing facility, South Korea. Problem: How  to remove 200,000m3 of 325 mesh goethite (pH 2.2 - 2.5 range; sulfuric acid) from a lined pond with dimensions of 120m x 253m. Since the material had settled and was resting on the pond bottom, dredging was selected as the appropriate removal method. No standard acid-resistant dredge was in ...


    By SRS Crisafulli, Inc.

  • Industrial wastewater reuse: CEMEX UK - Case Study

    CEMEX is one of the world's leading cement producers and suppliers of building materials. In order to limit their manufacturing footprint in terms of process water usage, CEMEX UK sourced their water from the final settlement lagoons of their local wastewater treatment plant (Anglian Water). atg UV Technology was approached by CEMEX UK to supply a containerized UV wastewater treatment plant to ...


    By atg UV Technology

  • Choosing the Right Geocell

    Not all geocells are created equal. While most manufacturers can provide similar-looking written specifications, you need assurances that the material delivered for your project is of the high quality that you expect. Important factors in the success of your geocell project include: Quality The geocell material is proven, strong, and will last ...


    By Presto Geosystems

  • Chemical storage buildings isolate hazardous liquids and minimize damage from spills

    The improper storage of corrosives and flammable liquids is the leading cause of spills that can result in damage to facilities and impact worker safety. One of the most effective practices to help minimize damage from chemical spills is to isolate the various chemical hazards. Since knowledge of chemical compatibility is critical, it is important to understand that there are two major types of ...


    By Interstate Products Inc

  • Underground Water Tanks: Understanding the installation process is the first step in safety inspections

    Underground storage tanks are increasingly becoming essential components of building projects, driven by rising interest in on-site rainwater and graywater collection and reuse. As a result, building officials may need to expand their expertise to include these products and their components. Some safety inspection work is obvious; for instance, checking that the installer or project owner ...


    By Xerxes Corporation

  • Chromium Phosphate Market Analysis By Application (Architectural Coatings) is Expected to Reach USD 96.65 Million by 2020

    The global market for Chromium Phosphate is expected to reach USD 96.65 million by 2020, according to a new study by Grand View Research, Inc. Key application markets for chromium phosphate include architectural coatings, corrosion inhibitor coatings, medical applications, and others such as catalyst applications. Strong demand from architectural coatings and corrosion inhibitor coatings are ...


  • Case study - Rockwood Pigments chooses Beltran System

    Rockwood Pigments, a global manufacturer of pigment products, has chosen a wet electrostatic precipitator (WESP) system engineered by Beltran Technologies, Inc.. to clean process gas streams before entering a sulfuric acid plant at its Easton, Pa., manufacturing facilities. Rockwood is the world's second laraest manufacturer of iron oxide and other inorganic color pigments used by paint and ...


    By Beltran Technologies, Inc.

  • Understanding cementitious resurfacers in water and wastewater environments

    An adhesion study of cementitious repair mortars used to address the surface defects and irregularities found in new or rehabilitative concrete construction is generating interest within the municipal water and wastewater construction industry, according to the author of a technical paper and several articles on the subject.Vaughn O’Dea, Director of Sales – Water and Wastewater Treatment for ...


    By Tnemec Company, Inc.

  • Shakti Submersible Pumps Lure A Wide User Base With Custom Built, Widely Varied Products

    Shakti Pumps has evolved as a premier manufacturing unit in the realm of stainless, submersible motors and pumps. The state of the art technology today in the domain of submersible pumps and allied motors, pronounces the hallmark buzzword: ‘Innovation’! Shakti submersible water pump has emerged into the competitive market with substantial opportunities and alternatives, and has ...


    By Shakti Pumps (I) Ltd

  • The Importance of Electropolishing

    Protecting Your Food and Beverage Equipment and Industrial Process It’s scheduled maintenance time in an industrial food production facility. Maintenance and cleaning teams scramble into action, checking off the maintenance needs while cleaning the conveyors, drying equipment, processing vessels, tanks, and toasting ovens inside the facility. As the equipment is being cleaned, tiny ...


    By R-V Industries, Inc.

  • Composite Drums

    Composite drums are composed of both plastic and steel to create the best of both worlds. Usually, there is a plastic interior with a steel exterior. That way it maintains the safe exterior of steel with the chemical safety and resistance of plastic drum interiors. We currently offer Composite Drums and Composite IBC’s. With the introduction of two materials together in a manner that is ...


    By Youngstown Barrel & Drum Co.

  • Selecting a pump for sea water reverse osmosis

    Reverse osmosis (RO) desalination has become a significant process used in the purification of water. Selecting the correct pump is a significant step in a well designed and properly operating pumping system. Although the pump is a relatively small part of the overall cost of an RO system, expenses resulting from downtime and inefficiency can quickly diminish the productivity of the RO system and ...


    By Cat Pumps

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you