corrosion protection material wastewater Articles

  • Case study - Corrosion protection in a pulp and paper industry

    It is widely accepted that corrosion has an important economic impact at an industrial scale. As an example, results of a study carried out in the US showed that the total annual estimated direct cost of corrosion in the country was $276 billion, which was approximately 3.1% of the nation’s Gross Domestic Product (GDP). Thus, within the last few decades, an important effort has been made to ...


    By Bioconservacion SA

  • Wastewater Level Measurement Techniques

    Level monitoring and control is a fundamental requirement in any wastewater treatment process. You will find level instrumentation installed at even the simplest treatment plants for pump control, chemical storage tanks and process level controls or alarms. Operators have only limited or emergency control over treatment plant influent, so level controls and instrumentation play an important role ...


    By Greyline Instruments Inc.

  • Skimming Oily Wastewater

    As large generators of oily wastewater tighten effluent controls, the U.S. Environmental Protection Agency (EPA) is targeting smaller generators. Some of the firms receiving their attention are smaller manufacturing plants, automotive garages, mobile equipment service shops and truck farms. Many of these firms do not have access to a sanitary sewer system that will accept oily wastewater. Because ...


    By Abanaki Corporation

  • Ultimate Linings Best| Industrial Coatings| Protective Coatings

    Industrial coatings are generally used to diminish the effects of corrosion thus preventing the metal from being tarnished or damaged. Industrial protective coating enhances the finesse of the metal or material which in turn improves the quality. The ...


    By Ultimate Linings

  • Municipal Wastewater Pump Station Design Problems and Solutions

    The growth of the Northern Virginia Area around Washington D.C. has resulted in the requirement for numerous new wastewater pumping stations and the upgrade and expansion of existing pump stations. This paper presents practical problems and solutions associated with the following pump station design issues: 1.) Concrete Corrosion Protection, 2.) Corrosion Resistant Materials, 3.) Pump Protection ...

  • Case study - Industrial wastewater reuse: CEMEX UK

    CEMEX is one of the world's leading cement producers and suppliers of building materials. In order to limit their manufacturing footprint in terms of process water usage, CEMEX UK sourced their water from the final settlement lagoons of their local wastewater treatment plant (Anglian Water). atg UV Technology was approached by CEMEX UK to supply a containerized UV wastewater treatment plant to ...


    By atg UV Technology

  • Understanding cementitious resurfacers in water and wastewater environments

    An adhesion study of cementitious repair mortars used to address the surface defects and irregularities found in new or rehabilitative concrete construction is generating interest within the municipal water and wastewater construction industry, according to the author of a technical paper and several articles on the subject.Vaughn O’Dea, Director of Sales – Water and Wastewater Treatment for ...


    By Tnemec Company, Inc.

  • Coal fired power plant achieves ZLD for FGD wastewater

    The Facility Illinois’ City of Springfield’s Dallman Power Station’s three coal-fired units and soon to be installed fourth unit, are equipped with flue gas desulfurization (FGD) systems (scrubbers) to control sulfur dioxide (SO2) emissions. The Problem A sharp increase in boron concentration in the FGD wastewater required that The City ...

  • `Perfect` finishing operation finds perfect solution to combat oily wastewater

    The origins of mass finishing can be traced to biblical times and the use of tumbling barrels. Today, vibratory finishing has emerged as one of the most popular finishing methods and manufacturers across a variety of metallic applications rely on leading providers such as Rosemont Industries in Cincinnati, Ohio. For decades, Rosemont has provided high quality metal finishing services at ...


    By Abanaki Corporation

  • Solving a messy problem: Covering wastewater treatment in Halton region Ontario, Canada case study

    The Regional Municipality of Halton or Halton Region is located in Southern Ontario, part of the greater Toronto area. Halton owns and operates seven wastewater treatment plants for four Ontario cities in its jurisdiction. These plants are designed to treat wastewater from homes and businesses turning the effluents into biosolids. Turning waste into food requires a process that starts with the ...


    By CST Industries Inc

  • The Hidden Dangers of Industrial Mop Water, Examining little-known threats to the environment & wastewater treatment processes

    When we think of mop water, most likely we think of our kitchen floor. In industrial plants, however, mop water could contain a toxic blend of chemicals that are mopped off the floor, and sometimes end up in our rivers, streams and municipal wastewater systems. While we consider the health of our environment, we don’t necessarily realize the hidden dangers of mop water. This article will ...

  • A Quick Solution: Modular Waste Water Treatment

    Rust corrodes materials and may lead to impurities. As a result, there is a demand across most sectors for components that are protected against corrosion. Cantin SA, headquartered in Domdidier in Switzerland, specializes in the metalworking of rust-proof materials. The company produces complete products and individual components for many different sectors, from medical technology through the ...


    By EnviroChemie GmbH

  • Leading military electrical connector manufacturer - case study

    Application The client designs and builds complex electrical connectors for salt water applications. The connectors are used in underwater communications cables and to make solid electrical connections within nuclear submarines. Each connector is housed in a durable waterproof rubber material with gold and platinum plated eluctors to optimize electrical conductivity and decrease ...


  • Underground Water Tanks: Understanding the installation process is the first step in safety inspections

    Underground storage tanks are increasingly becoming essential components of building projects, driven by rising interest in on-site rainwater and graywater collection and reuse. As a result, building officials may need to expand their expertise to include these products and their components. Some safety inspection work is obvious; for instance, checking that the installer or project owner ...


    By Xerxes Corporation

  • Built-to-Last: GTI Cover Replaced After 20 Years

    The Customer: Creston is a small town in the Kootenay region of southern British Columbia, Canada. Since 1959, it has been home to Columbia Brewing, makers of Kokanee beer, now owned by Anheuser-Busch InBev. The Customer’s Needs: The Town of Creston wastewater treatment facility treats both domestic and industrial (brewery) wastewater. The brewery ...

  • M-Coating – drain & sewer spraylining the economical solution to manhole shaft renovation

    M-Coating – Procedure for renovating a manhole shaft using ERGELIT Kombina KS M-Coating is a new, innovative renovation technique for both round and rectangular drainage shafts from 500mm to 1200mm. It is based on over 15 years of the Hermes company’s experience. Using this centrifuge spray technique, walls of shafts up to 10 metres deep can be coated to a realistic thickness. ...


    By HERMES Technologie Ltd.

  • Organics Monitoring: A Practical Guide

    Preventing product loss, lowering waste treatment costs, and reducing system maintenance and energy consumption through organics monitoring in the chemical, refining, food, and wastewater treatment industries. Summary Process water and steam condensate contamination includes organic, inorganic, and biological components. Sources of organic contamination include process ...


    By GE Analytical Instruments

  • Pulp and Paper Mills Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Petroleum Refining Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • What Is a Cooling Tower Water Treatment System and How Does It Work?

    For industrial companies using a cooling tower for its facility, some type of cooling tower water treatment system is usually necessary to ensure an efficient process and long equipment service life. If cooling tower water is left untreated, organic growth, fouling, scaling, and corrosion can reduce plant productivity, cause plant downtime, and require costly equipment replacements down the ...


    By SAMCO Technologies, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you