corrosive gas Articles

  • LED Applications for Oil and Gas Refining and Processing

    Oil and gas processing facilities are unsafe due to the existence of hazardous compounds during operations. When addressing such issues, companies in the sector may deploy explosion proof lighting systems to prevent the ignition of sparks created from the electrical equipment. The adoption of LED technology in oil and gas refineries has helped reinforce key safety measures associated with ...


    By Larson Electronics LLC

  • What`s the Best Air Pollution Control Technology for My Process?

    Air pollution control equipment is not something that business owners address by saying, “Let’s do the right thing for the environment and install an oxidizer!” In fact, the scenario is more likely to be “We need to increase productivity (always a good thing!), but that will put us over our annual emissions limits. Do we know what we will need? Where do we start? Who can ...

  • Understanding biogenic sulfide corrosion

    It is widely understood that wastewater collection and treatment systems are a source of malodorous odors. The most prevalent odorous gas is hydrogen sulfide (H2S), a toxic and corrosive gas with a characteristic rotten egg odor. What may often be overlooked, however, is that fact that H2S is also a precursor to the formation of sulfuric acid, H2SO4, which causes the destruction of metal and ...


    By Tnemec Company, Inc.

  • Environmentally safe combustion of corrosive solvents

    Type     HOFGAS®- IFM4c/350/100 Commissioning     2002 Site     EMS DOTTIKON (Dottikon, CH) Situation By September 2002 EMS Dottikon AG had started the operation of the new production plant for pharmaceutical substances. As a result of the drying process 0..100Nm³/h off-gas is expelled batch wise. The main compound is ...


    By Hofstetter BV

  • No more odor and corrosion case study

    Sewer systems are vulnerable to corrosion and, at times, can be the source of unpleasant odors. Kemira’s new H2S-Guard tackles both problems, as in most cases the source of these issues is hydrogen sulphide, forming in septic areas, in other words areas where no oxygen for metabolic reactions is available. The H2S-solution combines three important steps: measurement, monitoring and control ...

  • Successful corrosion strategy through good practice guidance

    Corrosion is a hugely significant issue to the oil and gas industry. This is especially true in marginal development projects where tight profit margins are in play and an unplanned failure in a key component or system can rapidly lead to the premature closure of the associated well, or even field, and a reduction in returns on investment to operators and shareholders. Here, Dr Cameron Stewart, ...


    By Energy Institute (EI)

  • Corrosion Problems Arisen from the Use of Alternative Combustibles

    Introduction Metal Corrosion has been a subject of growing important in cement furnaces during the past few years. This development is mainly a result of the tendency to use alternative fuels with ...


    By Castolin Eutectic

  • Humid, corrosive and malodorous waste gases - Case Study

    Example: Production of bio-ethanol Similar tasks: Dryers, Fibre board industry The production of bio-ethanol - fermentation, distillation, pelleting and drying - generates odorous and humid waste gas. Upstream lamellar demisters reduce both drop formation - causing lower VOC destruction efficiency - and solid matters. The regenerative thermal oxidiser (RTO) ...

  • Combating Corrosion within Power Generation Facilities

    Just about every utility facility that generates power or engages in some form of incineration must deal with corrosion issues. Since the ac Air Act of 1990, gas-scrubbing technologics have increased the im serving the assets of power plants and othe incineration infrastructure. These demands will increase further with the advent of new mercury removal requirements to be phased in during e near ...


    By Sauereisen Inc.

  • How to Prevent the Corrosion of Biomass Fired Boiler

     Biomass pellet,as the fuel of biomass fired boiler, is very more affordable than coal,oil and natural gas,and has no pollution to environment,it belongs to the renewable energy sources.Like other industrial boilers,biomass fired boiler also needs the maintenances to prevent corrosion in the process of its usage to prolong its service life.the engineer form Zhengzhou Boiler Co., Ltd.,gives ...


  • Advantages of Corrosion Resistant Lighting in Offshore Helidecks

    Advantages of Corrosion Resistant Lighting in Offshore Helidecks Corrosion resistant lighting must be installed in offshore helidecks due to the extreme nature of the hazardous location. The use of such luminaries can extend the lifespan of the location’s lighting system and provide safety for aircraft pilots and workers on the site. ...


    By Larson Electronics LLC

  • ELECTRONIC WATER TREATMENT REDUCES FOULING AND CORROSION IN PIPELINES

    Increasing pressure loss in the pipeline is often caused by scale corrosion or product fouling of the internal surfaces. This condition slows transmission and distribution capacity, and can require more than just routine maintenance if it remains unaddressed. Interior corrosion, fouling and leakage in pipeline systems will adversely impact bottom-line operations. ...

  • VISCOTAQ for Corrosion Earns `9 out of 10` rating

    Since 1986, InduMar Products (short for Industrial Marine) has been providing innovative solutions for pipe repair, pipe and container remediation, and corrosion control. Our ...


    By InduMar Products, Inc.

  • Application of data mining techniques in building predictive models for oil and gas problems: a case study on casing corrosion prediction

    This paper describes the use of (supervised) data mining to predict casing corrosion in carbon geological storage projects. This study discusses: 1) data pre–processing such as missing value handling and discretisation; 2) feature selection methods such as correlation coefficient, signal–to–noise ratio, information gain, Gini index, and the k–nearest neighbour (KNN) approach; 3) classification ...


    By Inderscience Publishers

  • Wastewater force main management – internal corrosion survey using inline methods

    In our first post about Wastewater Force Main Management, we looked at how preliminary analysis helps operators develop a plan for managing their system. After completing this process, operators can begin putting the plan into action with preliminary surveys on specific force mains. For those at WEFTEC, you can visit Pure ...


    By Pure Technologies

  • Scaling vs. Corrosion: Why It Matters for Your Boiler Feedwater System

    When using boilers for an industrial plant and process, one of the most important things to implement is the appropriate treatment of the boiler feedwater before it has a chance to scale and corrode equipment. Before beginning any process with a boiler, understanding the makeup and return water chemistry/characteristics, the manufacturer’s requirements for the boiler (what pressure it ...


    By SAMCO Technologies, Inc.

  • Wastewater Force Main Management – Internal Corrosion Survey using inline methods

    In our first post about Wastewater Force Main Management, we looked at how preliminary analysis helps operators develop a plan for managing their system. After completing this process, operators can begin putting the plan into action with preliminary surveys on specific force mains. For those at WEFTEC, you can visit Pure ...


    By Pure Technologies

  • Effect of substrate dilution on corrosion of colmonoy-6 weld overlays in nitric acid

    In the moderator system of some nuclear power plants, subsequent to the activation of the safety shutdown system, Gd3+ is removed by ion exchange prior to reactor start-up. During this process, the pH of the system water can get lowered to 3 due to generation of HNO3. Colmonoy-6, which is weld-deposited ...


    By Inderscience Publishers

  • Combating Corrosion - Committee G01 Standards Fight Nature’s Destructive Tendencies

    The evening news may leave many of us feeling war-weary, but one ASTM International technical committee has been successful in conflict of a different sort. It’s a commonplace but epic struggle between the natural and civilized worlds — the fight against metal corrosion. For the past half-century, the weapon of choice of ASTM Committee ...


    By ASTM International

  • Global sensitivity analysis of an in-sewer process model for the study of sulfide-induced corrosion of concrete

    The presence of high concentrations of hydrogen sulfide in the sewer system can result in corrosion of the concrete sewer pipes. The formation and fate of hydrogen sulfide in the sewer system is governed by a complex system of biological, chemical and physical processes. Therefore, mechanistic models have been developed to describe the underlying processes. In this work, global sensitivity ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you