corrosive gas monitoring Articles

  • Cleaning effect of Cetamine V217 in municipal housing complex treatment - Case Study

    Cleaning effect of Cetamine treatment 1. KEYWORDS Cetamine, boiler, heating system, cleaning, municipal housing 2. BACKGROUND This case study is based on an application in a municipal housing complex. The steam is used to heating buildings on a campus. The boilers got very little attention from the onsite staff. The softener was ...


    By Kurita

  • Boiler Dissolved Oxygen Control

    DISSOLVED OXYGEN CHEMISTRY Dissolved Oxygen (DO) is a measure of the amount of oxygen, usually thought of as a gas, that is dissolved in a liquid such as water. Oxygen is essential to life and is also the most common element found taking part in corrosion reactions. DO can be thought of as the fuel needed for the corrosion process to proceed. It is the corrosion reactions that necessitate ...


    By IC Controls Ltd.

  • Sale of by-Product HCl Covers Cost of Emission Control System

    Problem: Some of the specialty chemical processes at a major chemical manufacturer's plant result in considerable HCl loading in the off-gas. The HCl must be removed before the off-gas can be discharged to the atmosphere. Production of saleable by-product HCl solution was an important goal when looking for a high-efficiency HCl removal system. The company wanted to achieve a very low ...


  • Case History - Sale of By-product HCl Covers Cost of Emission-Control System

    Problem: Some of the specialty chemical processes at a major chemical manufacturer's plant result in considerable HCl loading in the off-gas. The HCl must be removed before the off-gas can be discharged to the atmosphere. Production of saleable by-product HCl solution was an important goal when looking for a high-efficiency HCl removal system. The company wanted to achieve a very low ...


  • Chemical Industry: Sale of by-Product HCl Covers Cost of Emission Control System Problem Case Study

    Some of the specialty chemical processes at a major chemical manufacturer’s plant result in considerable HCl loading in the off-gas. The HCl must be removed before the off-gas can be discharged to the atmosphere. Production of saleable by-product HCl solution was an important goal when looking for a high-efficiency HCl removal system. The company wanted to achieve a very low level of ...


    By CR Clean Air Group, LLC

  • Microbes in oil E&P

    The role of microbes in the oil industry, both detrimental and beneficial, has now become more and more accepted. Reservoir souring and microbial influenced corrosion cost the oil and gas business millions of dollars every year, and require adequate mitigation and surveillance strategies. Monitoring using modern molecular microbiological methods has facilitated a better understanding of ...


    By Energy Institute (EI)

  • Mini PipeDiver first: Milwaukee region uses electromagnetic technology on metallic force main inspection

    Milwaukee is a water hub, and not just because of its location along the shores of Lake Michigan, which holds 4.3 percent of the world’s supply of fresh drinking water. The City also boasts of global leadership in water technology, having won a U.S. Water Prize for innovative watershed-based approaches toward water sustainability. The City takes ...


    By Pure Technologies

  • Determining levels of moisture permeation through Kalrez and Chemraz o-ring material

    Problem Statement As the manufacturers of corrosive resistant gas cells we are often called upon to design a system for the detection of moisture in various gases. Most of our requests are to detect moisture in the low ppb levels. This can be a rather difficult task to accomplish when the surrounding environment has high levels of moisture (humidity). There are several steps that we ...


    By CIC Photonics, Inc.

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Key Operating Strategies for Chlorine Disinfection Operating Systems

    ABSTRACTChlorine has been used as a standard for disinfecting wastewater for many years. While being the standard There are many levels of automation for control of disinfection. To select the best control approach for your facility both control strategies and chlorination chemistry must be understood. Permit conditions must also be fully identified; organism concentrations and operational data. ...

  • Biogas in Asia

    The development of biogas production and monitoring has had many twists and turns, from its early days in Germany to the heady days of support through the Clean Development Mechanism (CDM).   The fall in the price of carbon credits, which rewarded reduction in emissions of methane (CH4) - a potent greenhouse gas - and use of methane from waste as renewable energy, has hit Asia ...


    By Geotech

  • Xenon saves brain cells

    A few years ago, the “Berliner Charité” medical school discovered that in addition to its application as an anaesthetic, the inert gas Xenon can also be used to stop the degeneration of brain cells following a stroke. As are the other inert gases (Helium, Neon, Argon and Krypton), Xenon is found in and makes up part of the air. Krypton and Xenon, however, are found in ...


    By sera GmbH

  • Case study - Trinity River Authority verifies condition of C303 Pipeline

    Service: Assess and Address Client: Trinity River Authority of Texas Project Date: November 2012 - ongoing Location: Trinity River, TX Type of Pipeline: Water Transmission Main Diameter: 30-inch (750mm) and 54-inch (1350mm) Pipe Material: ...


    By Pure Technologies

  • Case study - Destruction of inert process emissions

    Many chemical companies use batch reactors to make their products.  These reactors typically have vents which are opened and closed during emptying, filling, mixing, heating or cooling and other steps of the production process.  The gases coming from these vents must be controlled under most government regulations.  Generally speaking, the emissions produced are inert (little or no ...

  • Case study - Reactor vent emission control

    OVERVIEW Many chemical and petroleum companies use batch reactors to make their products.  These reactors typically have vents which are opened and closed during emptying, filling, mixing, heating or cooling and other steps of the production process.  The gases coming from these vents must be controlled under most government regulations.  Generally speaking, the ...

  • Like a phoenix from the ashes

    Thanks to growing environmental awareness, waste is increasingly being separated and recycled. However, residual waste always remains that can't easily be recycled. This ends up in waste incineration plants (referred to as KVAs in Swiss German) for disposal and reclaiming, such as the KVA Linthgebiet in Niederurnen in the Swiss canton of Glarus. Due to the strict environmental specifications ...


    By Metrohm AG

  • City of Roswell, Georgia - Case Study

    In late 2011, the United States Army Corps of Engineers (USACE) approved plans to install a new well and build a new water treatment facility for the City of Roswell, Georgia. Barlovento LLC was selected during a competitive bidding process to provide an iron and manganese removal system for the new water supply. AdEdge Water Technologies, LLC was contracted to design, manufacture, and commission ...

  • Effective Temperature Control for Cement Kiln Off-Gases

    INTRODUCTIONEffective off-gas temperature control without unwanted side effects can be achieved in many cement plants with state-of-the-art evaporative spray technology. Gas temperatures have elevated in recent years from as low as 180°C to over 370°C. This is coincident with a higher proportion of 'dry' operation kilns. Evaporative cooling water sprays in conditioning towers, ducts or at the ...


  • Checklist for Boiler Maintenance

    Boilers play a crucial role at industrial facilities and it is imperative that they be safely and properly maintained. Routine boiler maintenance can help prevent unplanned shutdowns and outages, increase the efficiency of the boiler and cut operating costs, and ensure that the facility is in full compliance with all laws and regulations governing boiler safety. What follows is a boiler ...


    By STI Group, Inc.

  • Five of the Best Cooling Tower Water Treatment Equipment Supply and Technology Companies

    Here at SAMCO technologies, our custom-engineered, cutting-edge solutions for your cooling tower water treatment needs have been developed by helping our customers solve some of the most complex purity and separation issues globally for over 40 years. Because of our skilled engineers and overall expertise in cooling tower water treatment, we are confident that our solutions are some of the best ...


    By SAMCO Technologies, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you