custom-made dust control solution Articles

  • The Nitty-Gritty of Dust Control

    Landfill owners and operators spend a lot of time focusing on containment: containment of waste; containment of leachate; containment of gas, litter, and odors. Quite often, containment of dust ranks near the bottom of the list. But that doesn’t lessen the importance of dust control. ...


    By Blue Ridge Services, Inc.

  • The invisible fine dust

    Air is lifeblood. Daily we inhale approximately 15.000 liter. Still, the air contains invisible pollutants, which vary in its composition and concentration depending on the location. Especially the respirable particles with a diameter of less than 2.5 µm (PM 2.5) were considered to be particularly dangerous. According to a current study conducted by the Max Planck Society, ...

  • Down with road dust

    There are more than 3.9 million miles of roadway in the United States, according to the Federal Highway Administration, and, depending on the area of the country you're in, as much as 70% of that road mileage is unpaved. The 1997 U.S. Environmental Protection Agency (EPA) National Air Quality and Emissions Trends Report states that those unpaved roads--which can cover a wide range of ...


    By Cypher Environmental Ltd.

  • Packed Cyclone Separator Removes Dust Particles While Recycling Process Liquids; New Solutions to Plant Problems

    Problem: The Monomeros Colombo Venezolanos plant in Barranquilla, Colombia, jointly operated by the South American countries of Colombia and Venezuela, produces caprolactam for the textile industry and various chemical fertilizers for agricultural use. Recently agricultural plant capabilities were increased with the addition of process units to improve the production and quality ...


    By CR Clean Air Group, LLC

  • LEV: What You Need to Know Before Selecting and Installing Dust Control Systems - White Paper

    Many processes in the production of drugs in the pharmaceutical industry produce significant quantities of dust which can cause serious health related problems to workers handling the materials. Additional problems of these operations are the loss of valuable material and the serious risk of cross contamination of drugs. Operations such as scooping, tablet processing, blending, milling, and tray ...


    By Kleissler P C, LLC

  • Chemical Industry: Packed Cyclone Separator Removes Dust Particles While Recycling Process Liquids Chemical Industry New Solutions to Plant Problems Case study

    Problem: The Monomeros Colombo Venezolanos plant in Barranquilla, Colombia, jointly operated by the South American countries of Colombia and Venezuela, produces caprolactam for the textile industry and various chemical fertilizers for agricultural use. Recently agricultural plant capabilities were increased with the addition of process units to improve the production and quality ...


    By CR Clean Air Group, LLC

  • Putting infection control into practice in the workplace

    Healthcare workers are, like patients, subject to illness from a variety of airborne pathogens common to hospital settings. This risk increases during construction and renovation, as these endeavors release dust as well as disease-inducing microbes into the surrounding environment. Since more than one in five workplace illnesses in private industry occur in a hospital setting , hospitals ...

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Valve actuation and control in the modern refinery

    Introduction The Reliance refinery at Jamnagar in India is one of the largest single refinery sites in the world and virtually all of its valves are motorised with Rotork actuators. Almost 3000 Rotork IQ intelligent valve actuators were installed during the construction of the original refinery, tank farm and power station in the late 1990s, together with a Rotork Pakscan 2E two-wire ...


    By Rotork

  • Fume control in large weld cells case study

    The Problem Tayco-Panelink is a Canadian based manufacturer of office furniture. Their customer base is worldwide. In 2001, DiversiTech installed a small fume extraction system which continues to do the job today. With this in mind, Tayco called on us to set up their new welding cell. Unfortunately, the welding fixtures were too large to accommodate a source capture system.   ...


    By DiversiTech

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


  • Rotork electric valve control contributes to Coca-Cola Enterprises’ environmental improvements

    Sector: Food & Beverage Category: Process Control Actuators Products: CVL, CVQ Overview Rotork electric valve control contributes to Coca-Cola Enterprises’ environmental improvements    Rotork CVA electric control valve actuation technology is helping Coca-Cola Enterprises (CCE) ...


    By Rotork

  • Erosion and Sediment Control: Navigating NPDES Regulations, the SWPPP, and Techniques for Compliance

    Erosion and Sedimentation: Why Are They a Problem? The US Environmental Protection Agency lists sediment as the single most common pollutant in rivers, streams, lakes, and reservoirs. With all the potentially harmful chemicals and substances in the world, it seems odd to many people that sediment—dirt, essentially—is singled out as the major culprit. Yet these particles of ...


    By FINN Corporation

  • How RNRG`s Hybrid XT Solutions Can Keep Your Turbine Output from Freezing Over This Winter

    At RNRG’s headquarters in Hinesburg, Vermont, the hillsides are painted with the vibrant hues of autumn. While breathtakingly beautiful, nature’s colorful display is also a reminder that winter is right around the corner. As the first frost looms, now is the perfect time to consider Hybrid XT Turbine Control ...


    By Renewable NRG Systems

  • Case study - WESP technology provides durable solution for Brazil’s top zinc operation

    Forward-thinking metallurgical plant operators around the world constantly seek out more advanced exhaust gas recovery technologies, not only to meet increasingly strict environmental regulations, but also to achieve superior operating performance and to control maintenance and other costs in a competitive marketplace. One fully-integrated polymetal producer headquartered in Brazil has managed to ...


    By Beltran Technologies, Inc.

  • High efficient cyclone systems with electrostatic recirculation for particulate matter (PM) emission control

    The development of new optimized dedusting systems has particular and increasing relevance for atmospheric particulate emission control. Indeed, traditional "particulatetraps" present several disadvantages that foster the search for alternative solutions. Industrial cyclones are, for their robust construction, absence of moving parts and general application, an appropriate technology for emission ...

  • Wood briquettes packed full of energy

    Konolt manages its energy output using RUF briquetting machinery Timber processors Konold are improving their energy balance with the help of their RUF briquetting machine. Wood waste is being pressed into briquettes to create a uniform combustible material. The heat they produce is then used for process heating and to heat their premises, with the residual heat being used to generate ...

  • Syncreon International Group - case study

    Syncreon is a specialised provider of integrated logistics services to global industries who provide supply chain solutions designed and customized to achieve maximum flexibility and agility. When Syncreon entered into agreement with a major manufacturer of printer cartridges to establish and operate a new manufacturing plant in Poland for the filling of printer cartridges they knew precisely who ...


    By Inteliair Ltd

  • Monroe scrubber solves pollution and odor problems from a glass resin reactor at a synthetic fiber manufacturing plant

    Monroe scrubber solves pollution and odor problems from a glass resin reactor at a synthetic fiber manufacturing plant Challenge The plant was emitting about 6.0 lbs/hr of toxic fumes from their resin reactor at a temperature of 200oF. The emitted gases to be cleaned were from hazardous, gaseous pollutants such as phenol and formaldehyde, as well as dust particulate. The ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you