custom thermal oxidizer Articles

  • Tank cleaning - Regenerative thermal oxidizer

    Three Canister RTO for Tank Car Loading and Unloading Terminal Epcon is proud to share its case study for the Tank Truck Loading Terminal. The Problem Loading and Unloading Tank Trucks: When the Tank Trucks are unloaded, it causes a lot of vapor to be released to atmosphere. These emissions have to be controlled and can not be released to atmosphere. ...


    By Epcon Industrial Systems, LP

  • Recuperative Thermal Oxidizers for Coffee Roasting

    Coffee Roasting Company Epcon has extensive experience in designing and building Recuperative Thermal Oxidizers for the Coffee Roasting Industry. The Problem A leader in the Coffee Industry needed equipment to control odor and eliminate VOC's from Coffee Roasting. The company went out seeking the technical solutions and went to several manufacturers to ...


    By Epcon Industrial Systems, LP

  • Regenerative Thermal Oxidizers for Midstream Industry

    Midstream Company Epcon has extensive experience in designing and building Regenerative Thermal Oxidizers (RTO's) for the Midstream Industry. The Problem A leading Midstream company needed equipment to achieve higher DRE and treat the H2S (sour gas) from their process. The company went out seeking the technical solutions and went to several ...


    By Epcon Industrial Systems, LP

  • Case study: Regenerative thermal oxidizers for coffee roasting

    Epcon has extensive experience in designing and building Regenerative Thermal Oxidizers (RTO's) for the Coffee Roasting Industry. The Problem A leader in the Coffee Industry needed equipment to control odor and eliminate VOC's from Coffee Roasting. The company went out seeking the technical solutions and went to several manufacturers to locate the best possible technology. ...


    By Epcon Industrial Systems, LP

  • Can coater chooses the Quadrant SR Thermal Oxidizer

    A can manufacturer worked with Catalytic Products International, Inc to design a unique Thermal (recuperative) Oxidizer. A recuperative thermal oxidizer was chosen over other thermal oxidation systems because of high solvent loads exhausted from the company’s can coating lines and a desire to integrate customized energy recovery system. After careful examination of the process ...

  • Regenerative Thermal Oxidizers…What You Should Know.

    Within industry today, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new.  In response to Congressional guidelines passed in the 1970’s, a number of companies with VOC emissions have been operating air pollution control systems of one type or another for 25 years or more.  These guidelines have been revised and added to as the years ...


    By The CMM Group, LLC

  • Case study - Custom web coater chooses the VECTOR Catalytic Oxidizer

    A custom web coating facility recently installed a VECTOR-Series Catalytic Oxidizer to eliminate the VOC emissions exhausted from three different coating lines. After an extensive technology review the VECTOR Catalytic Oxidizer was installed because it offered the highest reliability, lowest installed cost, and lowest operating costs. The application called for a system that could provide ...

  • QUADRANT SRS Thermal Oxidizer replaces silicone-contaminated system

    A Silicone Tape Converter recently replaced a poorly designed thermal oxidizer with a custom engineered thermal oxidizer designed by Catalytic Products International, Inc. The process coated film with a silicone based adhesive. The silicone vaporizes with other VOC’s in the drying process and is ducted to the thermal oxidizer. The combustion process converts the silicone vapors to a powder ...

  • Case study - Recuperative Thermal Oxidizers and midstream natural gas processing

    A large midstream natural gas processing facility was in urgent need of a VOC abatement device for their newly expanded gas processing plant. The operator was expanding their operations at an unusually fast pace. In the process of bringing on new gas treating capacity, they found themselves up against the limits of their current operating permit. Any new sources would put them over their limits ...

  • Medical implant manufacturer succeeds with the QUADRANT SRS Silicone Series Thermal OXidizer

    Medical Implant Manufacturer Succeeds with Customized Air Pollution Control Equipment Many industries utilize silicone as an ingredient in their manufactured product. Silicone enhances the attributes of the product or helps to improve production characteristics. Whatever the reason may be, users of solvent borne silicone's all face very troubling issues when it comes to the selection of the right ...

  • Regenerative Thermal Oxidizer + Zeolite Wheel for VOC Emissions Abatement - Case Study

    Case Study: “Heceygo Project” Ehaust Air Treatment Regenerative Thermal Oxidizer For Voc Emissions Treatment ZEOLITE ROTOR-CONCENTRATOR + REGENERATIVE THERMAL OXIDIZER The Technical Solution For Large Air Flows With Low Solvent Concentrations PROJECT MAIN DATA: ...


    By Tecam Group

  • Regenerative thermal oxidizer - three canister RTO for tank car loading and unloading terminal

    Epcon is proud to share its case study for the Tank Truck Loading Terminal. The Problem Loading and Unloading Tank Trucks: When the Tank Trucks are unloaded, it causes a lot of vapor to be released to atmosphere. These emissions have to be controlled and can not be released to atmosphere. The Process Generally speaking, with ...


    By Epcon Industrial Systems, LP

  • For VOC emissions treatment: Regenerative Thermal Oxidizer + Zeolite rotor-concentrator - Case Study

    Case Study: “Heceygo Project” EXHAUST AIR TREATMENT REGENERATIVE THERMAL OXIDIZER FOR VOC EMISSIONS TREATMENT ZEOLITE ROTOR-CONCENTRATOR + REGENERATIVE THERMAL OXIDIZER  The Technical Solution For Large Air Flows With Low Solvent Concentrations   PROJECT MAIN DATA: CUSTOMER NAME: Heceygo PROJECT SIZE: ...


    By Tecam Group

  • Recuperative oxidizer - Boat engine manufacturer

    Epcon has extensive experience in designing and building Thermal Oxidizers for Engine Cell Testing. The Problem A major Boat Engine manufacturer needed to lower emissions from engine cell testing. All motors, whether automobile or boat, are Pre-Tested for several hours prior to shipping. The emissions from these Engine Cells are mostly Carbon Monoxide and unburned fuel, with ...


    By Epcon Industrial Systems, LP

  • Case study - Oxidizer system optimization

    OXIDIZER SERVICE SERIES: PART 4 As promised, this is the fourth installment of Anguil's Oxidizer Service Series. If you have read through the first three parts, this can be seen as a capstone of those efforts. Having a strong oxidizer service plan, backed up with recommended spare parts and all of the proper documentation will not only improve your system performance but also allow you to focus ...

  • Case study - Turnkey installation for a custom coater

    A custom coating operation recently installed a TRITON-Regenerative Thermal Oxidizer manufactured by Catalytic Products International, Inc. The TRITON system was contracted on a turnkey basis in which CPI engineered and installed; the fugitive enclosure system to meet method 204, the ductwork system from all production lines, foundation work, electrical integration, and rigged the oxidizer. The ...

  • LATEST TECHNOLOGY: Low Cost INDUSTRIAL OXIDIZER SYSTEMS

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • Case study - Styrene emissions: Catalytic oxidizer with concentrator

    Overview The world's largest button manufacturer needed a pollution control system that would destroy styrene emissions from a variety of plant processes. The plant was proactively seeking a cost-effective air pollution control solution to preempt future regulatory action. The main concern of the customer was the high operating cost of an emission control system. ...

  • Case study - Increasing oxidizer capacity by 80,000 SCFM

    Overview A recreational products company bought a three year-old manufacturing facility with an existing regenerative thermal oxidizer (RTO) for the production of their outboard engine. They required emission control equipment to manage the volatile organic compounds (VOCs) emitted by the solvents used in the engine painting processes. The company wanted to minimize overall costs by using ...

  • Case study - Oxidizer energy recovery options

    Overview The mainstream media today is full of allusions to energy awareness and conservation. Just as visible these days are media references to astronomical dollar figures that can boggle the mind. This article does not seek to break out of that mold, but rather to conform to it – as Oxidizer Stack Heat Recovery offers a tremendous opportunity for both energy conservation and ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you