customized dewatering system Articles

  • In-Barge Dewatering Application Offers Innovative Solution Where Lay Down Area Is Unavailable - Case Study

    Tight space constraints are solved by customized Geotube   units in floating barges. Geotube dewatering technology has been used to deliver high performance solutions all over the world in more than 50 countries. Over 2,000 dewatering projects have taken advantage of Geotube containers since 1991. These have involved both small and large situations for lagoon cleanout, ...

  • Geotube Dewatering Technology Solves Lagoon Cleanout for Mexico’s Largest Chicken Processing Plant - Case Study

    Mexico's largest chicken processing plant was experiencing high levels of BOD discharge into the local river because their two sludge lagoons were full of high percentage solids sludge. The plant was expanding operations and had no place to store the additional sludge that would be generated, nor did it have any onsite means of removal and dewatering. The problem was compounded because the excess ...

  • Geotube Dewatering Technology Unclogs Queen’s Creek and the Queens Lake Marina Waterways - Case Study

    Dredging contractor uses cost effective and innovative dewatenng technology to contain and dewater marine sediments. A build-up of organics, sediments, very fine silt and clay created a major navigational problem for members of the Queens Lake Marina Association, in York County, VA. A contract was issued to dredge and dewater sediments in the boat slips and outside the enclosed slip area. Site ...

  • For Pulp and Paper Industry, Geotube Dewatering Technology Solves Many Problems - Case Study

    Geotube dewatering technology aids in lagoon cleanout, expands capacity, and helps address environmental concerns—often at a reduced cost compared to other methods. Pulp and paper mills have to manage water to be successful. That includes planning and executing efficient dewatering operations. And a technology from TenCate has proven itself highly successful in pulp and paper ...

  • Geotube Dewatering Technology Provides Expertise in the Clean-Up of Contaminated Sediments - Case Study

    Geotube units offer an effective solution for contaminated sites to manage the recovery and containment of PCBs, heavy metals, BTEX, PAHs, PACs, and other hazardous materials. Contaminated sediments are a common problem for communities and industries around the world. Past spills, leaks, discharges, and improper disposal or management of hazardous materials and wastes often result in ...

  • Briquetting systems for wood and metal

    Almost 30 years ago the Zaisertshofen-based RUF GmbH & Co. KG specialized in the development and production of briquetting systems. What started with a press for briquetting bark, has become a versatile and internationally active company over the years. RUF GmbH & Co. KG manufacture their briquetting systems in Germany. Their manufacturing and design divisions make it possible to respond ...

  • New sand washing system brings increased efficiency

    The introduction of new sand washing technology to Poland has seen many quarry operators enjoy substantial increases in efficiency and product quality in recent times. CDE Ireland, originate from Northern Ireland and have been operating in the Polish market for two years under the management of Mr Roman Gorski. The company has been designing and manufacturing sand washing plants for almost twenty ...


    By CDEnviro

  • Dynatec Provides Complete System for Aerospace Manufacturer

    Dynatec is engaged to provide a comprehensive water and wastewater treatment solution for an aerospace manufacturing process. Background Goodrich Aerospace was relocating a manufacturing facility that performs surface treatment for aircraft metal parts. The facility produces about 150,000 gallons per day of wastewater that contains hexavalent chrome, titanium, and other ...


    By Dynatec Systems Inc.

  • What is a wastewater treatment system and how does it work?

    For industrial companies producing wastewater as part of it’s process, some type of wastewater treatment system is usually necessary to ensure safety precautions and discharge regulations are met. The most appropriate wastewater treatment system will help the facility avoid harming the environment, human health, and a facility’s process or products (especially if the wastewater ...


    By SAMCO Technologies, Inc.

  • Implementation of an Innovative, Severe Duty, Grit Removal System at the Blue Plains Advanced Wastewater Treatment Plant in Washington, D.C.

    The District of Columbia Water and Sewer Authority’s Blue Plains Advanced Wastewater Treatment Plant has headworks facilities capable of treating an average daily design flow of 370 million gallons per day (mgd) and a design peak flow of over 1.0 billion gallons per day (1,000 mgd). The facilities are prone to very heavy grit loads during wet weather events, and the facilities are forced to ...

  • Waste Water Treatment Plant sees Economic and Environmental Return on Investment with Biosolids Drying System from Therma-Flite

    Therma-Flite, a resource recovery technology company, releases a new case study that provides municipalities with a look at how one mid-sized city has achieved its goals of eliminating transportation and landfill costs associated with biosolid waste disposal. Regulatory, economic and environmental pressures prompted the plant operations leader to seek equipment and systems that could transform ...


    By Therma-Flite Inc.

  • Meat processing factory - Case Study

    Succeeded in stable supply of polymer to two equipment from one Polymer Make-up System This customer was newly proceeding with a plan for installing a wastewater treatment plant. As the wastewater discharged from the factory contained much oil, the customer was planning to install a dissolved air flotation system in the wastewater treatment process. The VOLUTE Dewatering Press, having strong ...


    By AMCON Inc.

  • Wastewater Treatment Plant Village of Rouses Point, NY

    The Village of Rouses Point has been a BDP customer since 1990 when they purchased a 1.0m BDP Model ‘E’. During the latest expansion of their facility, the plant evaluated various options for increasing the hydraulic throughput of their dewatering system. BDP was the press of choice due to the 3DPTM belt filter press superior performance, simplified room layout and first class ...


    By BDP Industries

  • Rotomite-6000 contract dredging of various materials

    Customer: Georgia Dredging And Dewatering/Eco-Vac Type of Facility: Environmental Services & turnkey Dredging & Dewatering services Georgia Dredging and Dewatering developed out of the need to contact services other than those previously provided by vacuuming and jetting alone. David Grapengeter, President of ECO-VAC, Inc., and Jay Matthews teamed up to build a ...


    By SRS Crisafulli, Inc.

  • Dredging Contractor Using Rotomite 6000-case study

    Customer: Georgia Dredging And Dewatering/Eco-Vac Contacts: Jay Matthews and David Grapengeter Type of Facility: Environmental services & turnkey dredging & dewatering services Georgia Dredging and Dewatering developed out of the need to provide contract services other than those previously provided by vacuuming and ...


    By SRS Crisafulli, Inc.

  • Case Study - ADC (Eastanglia) Ltd.

    Key facts Company ADC (Eastanglia) Ltd. Location Bonnets Lane, PE188JE Wisbech England Web www.adceastanglia.co.uk Simon Moos solution AVC/DOD - On-site dewatering Customer profile ADC (East Anglia) Ltd. is based with their ...


    By Simon Moos Maskinfabrik A/S

  • Chopper Pumps: Saeby fish processing plant, sludge tank mixing and pumping

    The sludge is coming from the dewatering unit, includes polymers, and has a dry matter content of 15 %. A Landia dry installed pump type MPTKR-I 18,5 kW pump was installed. The pump mixes the tank contents through a recirculation system and pumps the sludge to a tanker truck. The pump was built with a special feeder propeller to make sure it could handle the high dry matter content. The ...


    By Landia

  • Wastewater Treatment Plant Town of Guilderland, NY

    The Town of Guilderland has been dependably served by a 1.5 meter BDP belt press since its installation in 1983. In 2004, the Town decided that an upgrade was necessary, and chose BDP due to their service and equipment reliability. The Town of Guilderland installed a 2.0 meter 3DPTM, and immediately experienced dryer cakes with higher throughput resulting in lower disposal costs. The 3DPTM was ...


    By BDP Industries

  • Colloidal sludge - case study

    YEAR: 2003 COUNTRY: ITALY N° and MACHINERY MODEL EMPLOYED: 1  JETFILTER RH 1000.70 Diemme® Filtration The customer is a company that produces ceramic pastes, requiring the dewatering of ceramic barbotine, a colloidal material which is difficult to dewater. It already had a filter press that did not have the ...


    By Aqseptence Group

  • Geotube Container Keeps Pulp & Paper Mill Running - SCA Tissue Paper, Cherokee, Alabama - Case Study

    TenCate develops and produces materials that function to increase performance, reduce costs, and deliver measurable results by working with our customers to provide advanced solutions. THE CHALLENGE SCA Tissue's Cherokee Alabama, USA, waste water treatment system has minimal sludge storage, about six hours, with all sludge going directly to a dewatering table, followed by a ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you