cut-size particle sampling head Articles

  • Moisture in Oils: The Three-Headed Beast

    Abstract Moisture contamination in in-service lube oils is perhaps one of the most destructive forms of engine corrosion second only to particle contamination.  Water contamination in oil can be categorized into three forms of water; Free, emulsified, and dissolved.  All forms of water have direct consequences to the oil and gears of the engine, but indirect consequences as ...


    By Arizona Instrument LLC

  • Building Services Management - Air Sampling -

    Untitled Document Maintenance professionals are often the first responders to mold complaints in their facilities. building occupants can be exposed to fungal (mold) ...


    By EMSL Analytical, Inc.

  • Air Sampling During NPP Accident

    There has been considerable interest recently generated regarding emergency air sampling protocols as a result of the Fukushima accident in Japan. A major concern involving air sampling requirements is the accurate determination of gaseous-radioactive iodine species emitted from the NPP to the environment as a result of an accident. During normal NPP operation gaseous radioactive iodine ...


    By F&J Specialty Products, Inc.

  • Sample Handling Strategies for Accurate Lead-In-Soil Measurements in the Field and Laboratory

    ABSTRACT The inhomogenous lead-in-soil matrix can present serious obstacles to accurate sample collection and handling. In typical lead-in-soil measurement, particle size related errors in sampling and sample handling often exceed all other sources of error. The magnitude of error can vary widely depending on the particulate nature of the lead contaminant and the effectiveness of control ...

  • Low-Flow (Minimal Drawdown) Ground-Water Sampling Procedures

    Untitled Document Background The Regional Superfund Ground Water Forum is a group of ground-water ...


    By Solinst Canada Ltd.

  • Minsur - Tin giant gets boost from TOMRA ore sorting technology - Case Study

    A plant for treating mined waste and low grade material at the world’s largest underground tin mine has repaid its capital cost of US$24 million in just four months, thanks in part to the role of a TOMRA X-ray transmission (XRT)-based ore sorting machine. The plant went into operation in 2016 and is projected to contribute 6,000 tonnes of refined tin to the ...


    By TOMRA Sorting GmbH.

  • Welding Fumes and the effects of Manganese

    The potential risks of welding operations include the potential to breathe in metal fumes and toxic gases. Fume particles are formed from the vaporisation of molten metal that occurs during the process. These particles are very fine in size and may join together to form larger particles.. The biggest risk is exposure to the manganese contained in fumes that are given off during welding. ...


    By Shawcity Limited

  • LIMS is the Anchor for Next-Gen Mining - News from MINExpo 2012

    Thermo Fisher Scientific, Inc. exhibited its Next-Gen Mining portfolio during MINExpo 2012 in Las Vegas, September 24-26. The company’s highly integrated range of instruments, equipment and consumables, anchored by its industry-leading laboratory information management systems (LIMS), is the only offering that addresses all segments of the mining process, from early stage exploration ...

  • Funding Innovative Uses For Scrap Tires

    Many States are cleaning up their stockpiles of scrap tires, but more roll in every day. According to the industry, each person in the United States generates one used tire annually. A number of states like North Carolina and Illinois are providing grants to stimulate markets for products made from scrap tire rubber, while states like Texas and New York are developing new civil engineering ...


    By BioCycle Magazine

  • Suggested Practice for Remediation of Highly Infectious Biological Agent Contamination in Indoor Environments

    Untitled Document PURPOSE This suggested practice describes those basic procedures to be followed, and precautions ...

  • In Situ Solidification/Stabilization

    Introduction Solidification/stabilization (S/S) reduces the mobility of hazardous substances and contaminants in the environment through both physical and chemical means. Unlike other remedial technologies, S/S seeks to trap or immobilize contaminants within their 'host' medium (i.e., the soil, sand, and/or building materials that contain them), instead of removing them through chemical or ...

  • The Future of Biowarfare

    Untitled Document In the July issue of IE Connections, Tom Anderson of RestCon Environmental developed an excellent overview of the current biological weapons and response ...


    By EMSL Analytical, Inc.

  • METH: THE NEW MOLD - New Markets in Clandestine Laboratory Clean-up

    Untitled Document Intro Clandestine labs have become prevalent across America. They are used for the ...


    By EMSL Analytical, Inc.

  • New advances in planning a bore

    Software helps take out the guesswork Horizontal directional drilling (HDD) is challenging and difficult work fraught with unknown obstacles. While it’s not possible to eliminate every obstacle, bore planning software tools developed by drill manufacturers can help small and large contractors create a bore plan that may help minimize risks. Bore planning software was ...


    By Vermeer

  • What will it take to get plastics out of the ocean?

    From drones to filters to artificial islands, innovators are working to reduce the threat thousands of tons of trash pose to marine ecosystems. A few palm trees stand strong in the salty breeze. Located on the southern tip of the Pacific island chain of Hawaii, Kamilo Beach is an isolated stretch of black volcanic shoreline in the middle of nowhere. Just a few hundred yards ...


    By Ensia

  • "A Non-Chemical Water Treatment for Cooling Towers"

    Untitled Document Introduction This paper will describe a case study of a ...


    By Dolphin WaterCare

  • Chemical-Free Treatment of Recirculating Water Using Pulsed-Power

    Untitled Document Regulatory pressures and economic considerations require industry to become cleaner, more efficient, and more environmentally benign. Such operating principles advance not only ...


    By Dolphin WaterCare

  • Park City, Utah Arsenic removal from ground water

    Background Park City Utah Water, which serves a population of 6,500, has five water sources. Spiro Tunnel and Spiro Portal are two that were in need of Iron and Manganese removal as well as above limits for Arsenic. Filtronics was engaged by the engineering firm of Eckhoff, Watson and Preator (EWP), Salt Lake City, to perform pilot tests for the Park City Municipal Corporation. The ...


    By Filtronics, Incorporated

  • Webinar Recap: “Developing, Testing, and Troubleshooting Chromatography Method Transfer”

    Hi, I’m Tom Wheat, Principal Scientist at Waters, and I recently hosted a webinar entitled, “Developing, Testing and Troubleshooting Chromatography Method Transfer.” Over the course of the webinar, we discussed the transfer of chromatographic methods that occurs at many stages in the development and production of a product. In its simplest form, the method is moved from one ...


    By Waters Corporation

  • Compost in the mix for storm water management

    Bioretention areas, also known as rain gardens, are increasingly being used to capture and treat storm water runoff from impervious surfaces such as roofs, sidewalks and parking lots. These landscaped areas often feature native plants installed in an engineered soil mixture that includes compost. “Bioretention areas or rain gardens are an attractive storm water Best Management Practice (BMP) ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you