cutting system Articles

  • Closer Look at the Capacity of SLA Batteries and Solar Energy Systems

    Sealed lead acid (SLA) batteries have a reputation for being durable when used to support portable electronic devices. They require minimal maintenance and offer leak-proof capabilities. But when used with solar energy systems, the units present issues that can hinder the potential and performance of the machines. For example, general purpose SLA batteries should not be deep cycled, as ...


    By Larson Electronics LLC

  • Stop It Pipe Repair System assists in decommissioning project - Case Study

    Since 1986, InduMar Products Inc. has provided a unique solution with its STOP IT Pipe Repair System. In refineries and chemical plants, where many miles of piping carry products that are often highly flammable, toxic or corrosive, the STOP IT provides a method to restore product and profit flow in minutes instead of the many hours required to cut out a pipe section, fabricate and install a new ...


    By InduMar Products, Inc.

  • Changing the Rules with Mass Detection

    How simplified detectors can provide mass data for every analytical run and speed up method development With access to multiple mass spectrometry systems of varying degrees of sophistication, Davy Guillarme (University of Geneva, Switzerland) wasn’t actively looking for new mass detection solutions. Nevertheless, the Waters ACQUITY QDa mass detector caught his eye. Why? Because it opens a ...


    By Waters Corporation

  • Tire Shredders: An Introduction

    How Does a Tire Shredding Machine Work? Tire shredding is a very common way of preparing scrap tires for disposal or recycle. In order to dispose of tires in a landfill, they must be shredded to various sized chips. The size required depends on the state or area you live in. Tire shredding is also used for recycling tires; crumb tire or tire mulch can be reused to create surfaces on ...


    By ECO Green Equipment

  • Compact mutrator cuts costs at ICI

    The pump previously used on sewage from the two-acre site was unable to cope with increased demand and generated a £3,000 annual repair bill, with additional costs for the hire of tankers to clear the resulting sewage build-up. Mono carried out an on-site survey of ICI’s specific needs at Lostock, where 70 people are employed, before recommending the Compact Mutrator. This is a complete sewage ...


    By NOV Mono - Mono Pumps Ltd

  • Cut your wastewater surcharges in half

    Water usage and wastewater discharge are a main expenditure for any industrial plant.  Biowater’s fixed film wastewater treatment systems reduce your municipal surcharges by at least half.  Our systems optimize treatment configurations to help a customer’s Clean-in-place (CIP) and Clean-out-of-place (COP) systems work more efficiently and make sure compliance is ...


    By Biowater Technology

  • Beverage Manufacturer to Cut Disposal Cost

    THE PROBLEM A Pennsylvania general contractor with much experience within the beverage industry, saw that water utilization at a major food and beverage manufacturer’s facilities would benefit from an integrated approach to minimizing water consumption, while simultaneously optimizing boiler and cooling water treatment issues.  By adopting such an approach, the contractor planned to offer ...


    By Samsco Corporation

  • Cut your wastewater surcharges in half

    Water usage and wastewater discharge are a main expenditure for any industrial plant.  Biowater’s fixed film wastewater treatment systems reduce your municipal surcharges by at least half.  Our systems optimize treatment configurations to help a customer’s Clean-in-place (CIP) and Clean-out-of-place (COP) systems work more efficiently and make sure compliance is ...


    By Biowater Technology

  • A second generation of clear-cut success

    Massachusetts clearing and grubbing contractor builds on a 43-year legacy with great people and great equipment. Some of the most desirable land in the Northeast lies within the rolling, wooded New England countryside. Among the clearing and grubbing contractors performing the important first step of commercial and residential development in the area, one of the better known is Letourneau ...


    By Morbark, LLC

  • Achieving and maintaining of short-cut nitrification in a cyclic activated sludge system

    A lab-scale Cyclic Activated Sludge Technology (CAST) system was operated more than 5 months to evaluate the effects of the operation mode on nitrogen removal performance and investigate a feasible method for achieving short-cut nitrification in the system. Results showed that nitrogen was removed by conventional biological nitrification and denitrification in traditional operation mode ...


    By IWA Publishing

  • Building Management System helps DECC to cut carbon emissions by 20%

    DECC surpasses 10:10 pledge to cut emissions by 10% in 2010 thanks to building management system and energy-efficiency ...


    By Vital Efficienci Ltd.

  • Electronic System Cuts Paper And Costs Of Managing Hazardous Materials

    The typical hospital uses thousands of potentially dangerous lab chemicals, cleaning products, and gases--including oxygen--each of which comes with several sheets of government-mandated paper on safety regulations. The Occupational Health and Safety Administration, industry-accreditation organizations, and fire departments all have rules about how those chemicals are tracked and managed. ...


    By Actio Corporation

  • Manufacturer Recycles Solvents, Cuts Air Emissions

    Untitled Document To achieve an acceptable level of solvent emissions, Sellotape Products Ltd. of New Zealand installed a ...


    By Calgon Carbon Corporation

  • Cutting hazardous waste costs and liability case study

    The AH-64A Apache Combat helicopter, a prominent fixture in Operation Desert Storm, is manufactured by McDonnell Douglas Helicopter Systems of Mesa, Arizona, using the latest and most technologically advanced methods and techniques. However, outdated technology and equipment were being used in the management and minimization of the company's hazardous waste. The manufacturing processes at the ...


    By Waste Control Systems Inc

  • On-site water treatment service cuts costs

    After more than two decades in the global oilpatch, Stuart Snydmiller thinks the future for his startup firm is in water, not petroleum. Or at least waste water.Tangent Environmental Technologies, owned with brother Jason and others, has taken existing technologies and put them together into a package that offers huge savings for drilling firms and any industrial operation that needs to process, ...


  • Sainsbury’s to cut energy costs with new intelligent building

    Retail giant will start using a smart-grid system at Kent store on Wednesday as part of another green initiative to cut carbon emissions. Sainsbury’s will start testing a smart-grid system at its new Hythe store in Kent on Wednesday, in an attempt to cut its carbon emissions and reliance on the grid at times of peak demand. The company said the smart grid system technology was a ...


    By Vital Efficienci Ltd.

  • Recyclers help to cut huge container imbalance

    The Port of Rotterdam Authority is housed in an office building with probably the most stunning view over Rotterdam. From the top floor, visitors have a breathtaking view on the many barges which are travelling along the busy river, the Erasmus bridge and the skyline of Europe’s main port.  Speaking about the importance of ports and harbours to the recycling industry, Victor Schoenmakers, at ...


    By Recycling International

  • UVC helps cut heating costs in jails

    If you think it’s hard to get HVAC money for schools and similar public buildings, there is a harder nut to crack: correctional facilities. It can be even more difficult to get additional funds appropriated to improve conditions in buildings where people are incarcerated. Compounding the problem, many correctional facility employees are in close proximity with the inmate community daily. ...


    By E-CO

  • Business seeks viable alternatives to price cutting

    The UK manufacturing industry is undergoing a severe recession. Any business involved in production is facing serious competition from countries that can produce goods at much lower prices due to cheaper equipment, labour and general costs. Globalisation has meant that companies have had to expand their focus to include new and expanding markets. Assessing where manufacturing functions are best ...


    By Maxsys Fuel Systems Ltd

  • World’s top companies failing to cut carbon emissions

    New report claims that only 19% of the world’s top companies have achieved significant reductions in their carbon emissions. New research reveals that over 80% of the world's top companies aren't achieving significant carbon emissions reductions, although there is an increase in the amount of companies that identify significant opportunities instead of risks from climate change. According ...


    By Vital Efficienci Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you