decanter centrifuge Articles

  • VSEP beats decanter centrifuge at solids removal from ethanol biomass

    As the world searches for fuel alternatives to gasoline, a clear candidate to lead the way has emerged, Ethanol. Ethanol production for use as a fuel additive (or to be used directly as a fuel source) has grown in popularity due to governmental regulations and in some cases economic incentives. Both regulations and incentives seem to be based on environmental concerns as well as a desire to ...


    By New Logic Research, Inc.

  • Common challenges relative to the use of Decanter Centrifuges for barite recovery in the oil & gas industry

    When centrifuges are properly deployed, they can have dramatic effects on drilling performance. In fact, without them, many of the advances made in drilling would not have been considered achievable. Classically, we believe that centrifuges can achieve two common goals: Reduce the content of drilled fines, specifically colloidal solids, and Perform barite recovery in order to reduce ...


    By Elgin Separation Solutions

  • New FRP-casing for a decanter centrifuge at Lubrizol Advanced Materials Resin B.V., The Netherlands - Case Study

    Bulletproof innovation Creating a safe, corrosion-proof centrifuge case in Fiberglass Reinforced Plastic (FRP) ...

  • Sedimentation & Centrifugation World Markets Report

    Provides analyses & forecasts for centrifuges, clarifiers and thickeners, hydrocyclones and dissolved air flotation. Company analysis & segmented industry forecasts are included. Details are provided for municipal, chemical, pulp & paper, food, metals and other industries. One volume is exclusively devoted to individual company analyses. Rapidly growing segments, such as centrifuges ...


    By The McIlvaine Company

  • Centrifuge Technology in Drilling Fluid Recycling

    Drilling fluid additives and the water that contains them are an essential part and expense of successfully completing a horizontal directional drilling (HDD) installation, and the longer the bore and larger the product being installed, the more drilling fluids cost. Therefore, it makes economic sense to recycle drilling fluids by removing cuttings and recirculating the cleaned ...


    By Elgin Separation Solutions

  • D-Series decanter for sludge dewatering at RHV STEYR, Austria - Case Study

    The challenge: coping with increasing effluent in line with legislation ...

  • BAIONI supply complete dewatering centrifuge system for APS Ltd

    Situated near Slough, in Berkshire, Aggregate Processing Solutions (APS) is operating a washing plant where Baioni has recently supplied a centrifuge system to complement the whole existing plant. Baioni has boosted the capacity of its decanter centrifuges range to pave the way for further improvements in waste ...


    By Baioni Crushing Plants Spa

  • Increased centrifuge throughput in plastic recycling with innovative screw conveyor - Case Study

    The challenge: Improve productivity and reduce downtime at recycling centrifuge ...

  • The Application of Waste Solids Management Vertical Cuttings Dryers as an integral element of a successful Solids Control System

    In Elgin’s last White Paper, “Common Challenges Relative to the Use of Decanter Centrifuges for Barite Recovery in the Oil & Gas Industry,” a detailed discussion was offered about the complexities involved in achieving effective solids control when deploying a dual-centrifuge “barite ...


    By Elgin Separation Solutions

  • Salmon Processor

    The water is from a salmon processor where they are using an Andritz 3 phase decanter centrifuge to recover the oil in the salmon parts after packaging the salmon for human consumption. The oil is very valuable for use in the health food industry. The Andritz centrifuge recovers 90% of the oil from the wastestream, but leaves a residual oil emulsion that needs to be treated prior to discharge to ...


    By Integrated Engineers Inc.

  • Energy from waste: the recycling of limed fleshings

    Leather products have been around a long while - there are those who claim that it is the second oldest business in the world. Going back a few millennia, when our earliest ancestors decided that sitting on hard rock was not a soft option, they turned to other materials in order to create more comfortable seating, as well as warmer bedding and improved clothing. Animal skins became the fabric ...


    By Flottweg SE

  • Case study - Nottinghamshire Recycling

    DUO Equipment delivered and installed a new full washing and water management plant for Nottinghamshire Recycling Ltd (NRL). Based in Worksop, Nottinghamshire, NRL is a sustainable waste solution provider processing C & D waste, green waste, wood and recycled aggregates. The new washing and water management plant (which includes a Gennaretti centrifuge system) will provide NRL with the ...


    By DUO (Europe) plc

  • Maximum Efficiency for...Saving Water

    In an attempt to protect our ecological surroundings and minimize the negative effects of industrial processes, it is necessary to purify and recover the waters used during washing operations of sand washing, quarrying and recycling operations. The first step is to recover 100% of the waters used and to eliminate the concentration of sludge, thus Baioni's solutions aim at offering a full sludge ...


    By Baioni Crushing Plants Spa

  • A smarter approach to solids control

    When looking at technical brochures and marketing materials in regards to solids-control equipment, one question that should always come to mind should be: Is this really necessary? Other great questions to ask are: What are my day-to-day needs; and what are my severe, high-duty needs? Finding the right solidscontrol equipment is much like buying a personal automobile. Most vehicles’ ...


    By Elgin Separation Solutions

  • Usen

    “Oil is not only an important sector of our industry but also a symbol of the independence of our country, of the hope for a better future”. These were the words of President Nursultan Nasarbayev in September 1999, commemorating the 100th anniversary of the formation of the oil and gas industry. The oil industry in Kazakhstan has existed for more than 100 years, however a significant boom in this ...


    By Flottweg SE

  • Measurement of oxygen during the purification of glycerin – Case Study

    Background information Glycerin is a basic chemical which is used in creams and ointments, in antifreeze and brake fluid for vehicles, as a plasticizer, and as a base for paints and lacquers. Glycerin is produced as a by-product during the manufacture of soap. This was the main source of glycerin for many years. However, the production of biodiesel has increased greatly in the last ...

  • A perfect pair: SBR designs & advanced aeration technology

    Conventional sequencing batch reactors (SBRs) that utilize diffused-air networks have existed in the U.S. for about three decades now. The reliability of controls and instrumentation has significantly improved in the last 10 to 15 years, and as a result, SBR plant designs are becoming more widely accepted. The attractiveness of their compact layout and ease of operation has also helped increase ...

  • Oil Skimming...no longer a luxury

    Tramp oils – hydraulic oil, lubricating oil and greases, and protective metal coatings, in coolant create expensive and frustrating problems. Tramp oils in coolant provide a breeding ground for bacteria and can cause problems ranging from unpleasant odor to employee skin rashes. When tramp oils combine with other contaminants in coolant they can form a sticky substance that clogs lines and ...


    By Oil Skimmers, Inc.

  • SBR keeps noise, energy & capital costs low - Case Study

    Pennsylvania is home to one of the first Argos SBR plants to utilize a surface mounted process aerator/mixer, which is a significant improvement over the traditional diffused air network designs. The new layout offers substantial capital investment savings as well as significant reductions in noise, ...

  • A new approach to drilling waste management – prevention!

    Grangemouth based Surface Active Solutions (SAS) has developed its microemulsion based technology to aid the prevention and management of drilling waste. The many activities surrounding the removal of drilling mud in surface and downhole cleaning applications usually generate significant volumes of oil contaminated drilling waste. The drilling mud is typically removed through the use of solvents ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you