des metal separator Articles

  • MSW sorting at Tratamiento de Residuos La Rioja, Spain case study

    TITECH x-tract waste sorting system delivers benefits at La Rioja Eco-Park, Spain. It enables the Eco-Park to guarantee the minimum quality required in the product obtained and thereby increase the overall performance of the process. An eight hectare, modern, integrated waste treatment centre, the park receives and treats material from all La Rioja municipalities. ...


    By TOMRA Sorting (TITECH)

  • REDWAVE Metal Days 2015 - Review

    The REDWAVE Metal Days, at BT-Wolfgang Binder in Gleisdorf, pro­vided the context for international experts from various sectors of the metal and aluminium recycling in­dustry to exchange information on markets, technologies and practical experience. In addition, the new REDWAVE XRF-M sorting system, for recycling in the metals sector, was presented to the participants. ...

  • Sweed model 5703 XHD magnetic separator system

    Built for the most extreme linear scrap challenges Model 5703 XHD Chopper Put four cable-annihilating rotary knives on a beefy 600 lb flywheel that’s driven by up to 60 HP of raw power and you have a super heavy-duty rotary shear with a serious appetite. Sweed’s taken their popular 5703 rotary shear, originally introduced in the early 90’s, and ...


    By Sweed Machinery, Inc.

  • Altpapier Sortierung Dachau Gmbh – Germany - Sensor based optical sorting for paper de-inking case study

    Customer ASD - Altpapier Sortierung Dachau GmbH - are specialists in recycling of waste paper. The company produces high quality paper grades for their industry partners. Requirements The requirements are maximised gain output with the highest purities of 97% of sorted paper grades from waste paper with less than 8% de-inking loss overall. ...

  • Using air instead of water to separate your recycling materials

    Separating recyclables by density is nothing new. For many years, the use of wet tanks to remove heavy materials from lights has been very successful. Unfortunately, the disadvantages of this technology are increasingly apparent. With stringent and increasing environmental regulations, use of water is quickly become a messy proposition. When material enters a wet tank, any contaminant on the ...


    By General Kinematics

  • Ecopark 4, Spain, trusts AUTOSORT for the efficient automation of its separation processes - Case Study

    Ecopark 4 in Hostalets de Pierola (Barcelona), part of the infrastructure of the Barcelona Metropolitan Area (AMB), uses ten of TOMRA Sorting Recycling's AUTOSORT optical separators, which currently recover 90% of sortable material. This fully automated plant has three treatment streams which process around 300,000 tons annually. Ecopark 4, located in Hostalets de Pierola (Barcelona), is a ...


    By TOMRA Sorting (TITECH)

  • UNTHA Recycling Days (May 25th and 26th, 2011)

    True to the motto "Reliable shredding technology – be part of it", we would like to invite you to join us at the First UNTHA Recycling Days in Kuchl near Salzburg on May 25th and 26th, 2011 Separation, classifying and recycling of waste has been part of everyday life for years. Shredding technology often is the core element in partly ...


    By UNTHA Shredding Technology

  • Zn and Pb emissions from roofing materials – modelling and mass balance attempt at the scale of a small urban catchment

    Many studies have shown that roofing materials are an important source of metals in urban runoff. Today, in the context of the European Water Directive (2000/60 CE), the quantification of these emissions is necessary, and thus the development of assessment tools is needed. This study focuses on a small urban catchment (drained by a separative sewer system). Atmospheric fallout, road runoff, roof ...


    By IWA Publishing

  • Griñó group packaging sorting plant in Lleida, Spain case study

    Leading-edge technology at the Griñó group packaging sorting plant in Lleida, Spain Griñó Ecologic has installed three TITECH autosort 4 sensor-based sorters at its packaging sorting plant in Montoliu de Lleida.The latest-generation equipment at the Montoliu plant is more compact, reliable, power-efficient and accurate. Overview ...


    By TOMRA Sorting (TITECH)

  • Removal of sulphur dioxide from exhaust gases using hazardous and structured packing

    The expulsion of sulphur dioxide from hydrocarbon combustion can reach levels higher than accepted by the normative. In order to evaluate the efficiency of separation of SO2 by different packing systems constructed with materials such as metals or ceramics, the mass transfer and hydrodynamic parameters were evaluated. With the use of mass transfer model, the ININ packing showed higher ...


    By Inderscience Publishers

  • Impact supports the plastic recycling industry to improve product quality

    Impact Air Systems were recently contacted by a well established metal recycling company who had installed a plastic recycling facility at their 32 acre site in Lincolnshire. Blue Sky Plastics Ltd installed a plastic recycling system to recycle household rigid plastic material and plastic car components and needed to further improve the quality of the HDPE and PP granules by removing the ...


    By Impact Air Systems

  • Minergy GFT Phase 3 Final Report

    The presence of PCBs in the lower Fox River in northeastern Wisconsin has been a concern for many years. Extensiveinvestigations of the river bottom have taken place during the 1980s and 1990s. Two areas of the river have undergonedemonstration dredging in the past five years. While planning the appropriate remedial response to be undertaken, the Wisconsin Department of Natural Resources (DNR) ...


    By Minergy Corporation Limited

  • Energy and phosphorus recovery from black water

    Source-separated black water (BW) (toilet water) containing 38% of the organic material and 68% of the phosphorus in the total household waste (water) stream including kitchen waste, is a potential source for energy and phosphorus recovery. The energy recovered, in the form of electricity and heat, is more than sufficient for anaerobic treatment, nitrogen removal and phosphorus recovery. The ...


    By IWA Publishing

  • Rotary batch blenders help DIP get pre-mixes to market fast

    Mixers are more efficient than double-cone units Ductil Iron Powder (DIP), Buzau, Romania, was established in 2000 as a spin-off of Ductil Steel. Its products are iron and alloyed powders for use in powder metallurgy and welding applications. The plant for making the iron powders began operation in 1995, and by 2000 it reached its current capacity ...

  • Acid mine drainage treatment

    Acid mine/rock drainage is a rampant problem in the world today. The above photo depicts acid drainage at an abandoned mine in the Yukon Territory of northwest Canada. This mine shares a similar history to thousands of other mines throughout the world. It was in operation for six short years in the 1950’s, producing gold ore. Its profitability eventually failed and it was abandoned. In the ...


    By WesTech Engineering, Inc.

  • Papyrus Austria Paper sorting case study

    Customer For 30 years, Papyrus Altpapier Service has been active in the disposal and secondary raw material industry in Austria. The Papyrus Group has 180 employees at 5 locations. Request Conversion and automation of an existing manual sorting system, combined with a throughput increase of 12 tonnes per hour, as well as compliance with the purity guidelines ...

  • Sand Plant

    Sand Plant,Sand Processing Plant The sand plant reserve came from a old stream bed, that had a 20 to 30 ft thick sand deposit in it. It was sampled and the lab testing revealed that there was less than 0.03% iron, and a few other metals (TiO2, Al2O3, MgO). The sand plant equipment length of the deposit was over a mile, so ...


  • (Ge,Mn): A ferromagnetic semiconductor for spin injection in silicon

    Spin injection in semiconductors has been a long-standing issue in the field of spintronics for nearly 10 years. Only at the end of the 1990s, electrical spin injection in III-V semiconductors could be demonstrated using spin-light emitting diodes as spin detectors. Although silicon is the key material of microelectronics, spin injection in silicon could be achieved only recently in 2007. For ...


    By Inderscience Publishers

  • Choosing the best shakeout technology for your process

    In the modern foundry, there are many options when it comes to choosing the proper shakeout technology for your metal casting facility. Improper selection can lead to poor throughput, casting damage, and unnecessary down time, all which costs your foundry money. There are many di¬erent shakeout designs available on the market today, including brute force, variable drive, and two-mass ...


    By General Kinematics

  • Choosing the best shakeout technology for your process

    In the modern foundry, there are many options when it comes to choosing the proper shakeout technology for your metal casting facility. Improper selection can lead to poor throughput, casting damage, and unnecessary down time, all which costs your foundry money. There are many di¬erent shakeout designs available on the market today, including brute force, variable drive, and two-mass ...


    By General Kinematics

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you