dewatering filter press Articles

  • Overhaul frequency of a dewatering press decreased at a milk and dairy products plant

    Problem This plant used a belt press to dewater their waste activated sludge from their membrane bioreactor. However the equipment frequently caused clogs and the operator needed to replace the filter cloth once every 3 months. The labor and cost for the replacement of the filter cloth caused problems for the operator. Client's voice We used ...


    By AMCON Inc.

  • VOLUTE Dewatering Press reduces maintenance time sharply! (Japan)

    Komagata Foods Co., Ltd. <Problem> Komagata Foods Co., Ltd., manufacturing feed for fish cultivation, used to use a belt filter press, but they had always faced clogging problems because of the oily sludge. They also suffered from spillage over from the side of filter cloth, making operators to keep their eyes on the machine all day. <AMCON's offer for ...


    By AMCON Inc.

  • Spent grain dewatering

    1. Back ground: Firms that produce alcoholic beverages from grain are an important market for dewatering Powerful Belt Press. The industry firms consist mostly of beer brewers and distilleries. Their raw materials are barley, corn, wheat, rice, and other grains. They all produce a common by-product: spent grain. Spent grain is the name given to material left after the grain is fermented and the ...

  • A New, Real Technology for Solids Dewatering

    Over the past decade, there have been few significant improvements to the performance in sludge dewatering technologies. Most improvements, other than process optimizations from the polymer industry, have been minor adaptations to the various dewatering technologies such as adding additional pressure rollers or modifying the diameters of pressure rollers on a belt filter press. The adoption of ...

  • The Volute Dewatering Press Purchased Repeatedly, Plays a Very Important Role at a Tofu Factory.(Japan)

    Otokomae Tofu Inc. Otokomae Tofu Inc. develops, manufactures and sells Tofu (Soybean Curd), with impressive product names. They installed the second Volute Dewatering Press in their Kiyosato factory, following the first one installed in their Kyoto factory. We interviewed the responsible person to take care of the whole wastewater treatment plant to ask the reason why they have become our ...


    By AMCON Inc.

  • Geotube Dewatering Technology Provides An Effective Dewatering Technology Solution For Dewatering Aggregate Tailings - Case Study

    Simple and inexpensive, Geotube dewatering technology can make management of tailings and fines much easier. Many aggregate plants experience high equipment and manpower costs associated with the handling and removing o( tailings and fines from settling ponds. The costs of maintaining pond operations can vary significantly from plant to plant. Not only is valuable space tied up ...

  • Village of Maybrook, NY Sludge Dewatering System

    Project Summary: The Village of Maybrook WWTP process consists of primary clarification, trickling filters, and secondary clarification. Primary sludge and trickling filter humus is anaerobically digested. The belt filter press dewaters the sludge eliminating the need for sludge drying beds. The belt filter press discharge cake solids are consistently in the 25 to 30 percent range, which is ...


    By BDP Industries

  • Wastewater-Solids Dewatering Odor Control - Case Study

    Background The Milan Wastewater Treatment Plant, located just south of Moline, Illinois, is a 1.7 MGD (6,434 m3/day) activated sludge facility with an average wastewater flow of 700,000 gpd to 800,000 gpd. This facility dewaters primary sludge using a belt filter press (Figure 1). The press operates an average of three times per month, 8 hours per day at a pump rate of 100 gpm. The ...


    By Carus Corporation

  • You can dewater your cake and pump it too! Conveyance options for OCSD Plant 1

    OCSD is currently upgrading Reclamation Plant 1 to co-thicken primary and waste activated solids using centrifuges. Digested solids will also be dewatered using centrifuges and the two processes will be housed in the same building. A small building footprint, stringent redundancy requirements, and a 200 foot distance between the dewatering and storage facilities requires innovative engineering ...

  • Combined experiences of thermal hydrolysis and anaerobic digestion – latest thinking on thermal hydrolysis of secondary sludge only for optimum dewatering and digestion.

    ABSTRACT The basic principles of batch thermal hydrolysis process (THP) are well known as a pre-treatment to anaerobic digestion (AD) . Early work done in the 70s in the USA and the 80s in Japan demonstrated the optimum time and temperature for thermal hydrolysis being 340 F for 30minutes. These principles have been put into full practice in 20 plants around the world at plants ranging from 5 ...


    By Cambi AS

  • WERF Phase 2: The Impact of Digestion and Dewatering on Reactivation and Regrowth of Viable but Non-Culturable Indicator Bacteria

    ABSTRACTRecently, a number of reports have found much higher densities of the indicator bacteria, either fecal coliform or E. coli, in dewatered cakes compared to the samples just prior to the dewatering process for anaerobically digested solids. This phenomenon has been attributed to either reactivation and/or regrowth. The objectives of this study were to examine the impact of digestion and ...

  • Komagata Foods Co., Ltd. case study

    VOLUTE Dewatering Press reduces maintenance time sharply! Komagata Foods Co., Ltd., manufacturing feed for fish cultivation, used to use a belt filter press, but they had always faced clogging problems because of the oily sludge. They also suffered from spillage over from the side of filter cloth, making operators to keep their eyes on the machine all day. AMCON's ...


    By AMCON Inc.

  • Coffee manufacturing plant - Case Study

    Secure treatment for high oil content sludge Problem An instant coffee manufacturer in Thailand had dewatered sludge with a filter press. 10 to 20 percent of the coffee beans is oil, which has caused clogging of the filter and trouble to stop the equipment for maintenance. AMCON's offer for a solution The self-cleaning ...


    By AMCON Inc.

  • Wastewater Treatment Plant MSD of Buncombe County, NC

    The Metropolitan Sewerage District of Buncombe County was faced with high maintenance cost of existing equipment, poor reliability and increased incinerator cost. After extension research into dewatering options, it was determined that the most economical dewatering system was on-site dewatering with a belt filter press. BDP was the press of choice due to the 3DPTM belt filter press superior ...


    By BDP Industries

  • Hoosac WQD Williamstown, MA

    An aging primary and secondary treatment facility coupled with increased loadings to the co-settling primary clarifier resulted in the need to upgrade the Hoosac WQD. An important component of the upgrade was biosolids handling. Tighe & Bond selected the belt filter press as the bases of design for this 5.37 MGD average daily flow facility. The co-settled primary and secondary sludge is ...


    By BDP Industries

  • J.C. Chambers WWTP City of Berea, KY

    The City of Berea was operating with outdated belt press technology which had high maintenance requirements and inadequate operating capacity. During the latest expansion of their facility, the plant evaluated various options for increasing the hydraulic throughput and reliability of their dewatering system. BDP was the press of choice due to the superior performance of the 3DPTM belt filter ...


    By BDP Industries

  • Let it do the job for you! VOLUTE frees operators from maintenance (Japan)

    Nippoh Chemicals Co., Ltd. Problem Operators had to make frequent check-ups and maintenance with the existing belt filter press before introducing the VOLUTE Dewatering Press. Sludge conditions changed time to time so that diluted sludge often spilled over from the side of the filter cloth, making operators have to clean up the machine every three hours. ...


    By AMCON Inc.

  • Nippoh Chemicals CO.,LTD - Case Study

    Let it does job for you! VOLUTE frees operator from maintenance. Operators had to make frequent check-up and maintenance with the existing belt filter press before introducing the VOLTUE Dewatering Press. Sludge condition changed time to time that dilute sludge often spilled over from the side of filter cloth, making operators to clean up machine every three hours. ...


    By AMCON Inc.

  • Wastewater from metal finishing industry set for more regulation from the Environmental Protection Agency

    The U.S. Environmental Protection Agency (EPA) recently released its preliminary 2014 Effluent (liquid waste or sewage discharged into a river or sea) Guidelines Program, which outlined more regulations for wastewater from those within the metal finishing industry. A filter press has been a long-trusted solution for treating metal waste, even for those applications that are difficult to dewater. ...


    By M.W. Watermark LLC

  • Colloidal sludge - case study

    YEAR: 2003 COUNTRY: ITALY N° and MACHINERY MODEL EMPLOYED: 1  JETFILTER RH 1000.70 Diemme® Filtration The customer is a company that produces ceramic pastes, requiring the dewatering of ceramic barbotine, a colloidal material which is difficult to dewater. It already had a filter press that did not have the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you