dewatering tube Articles

  • Geotextiles in Construction Dewatering

    Woven geotextiles work wonders in dewatering applications as wraps around well screens and sump pit screens. The textile can be sewn into sleeves or tubes to be slid over the well screen or sump pit framework. This technique allows the user to compensate for well screens with slots that are too large or for sump pit piping with large perforations. By adding the geotextile sleeves the user ...


    By Griffin Dewatering

  • Using geotextile tubes for dewatering and beneficial use of high water content solid wastes: design charts and verifications

    The interest to push the beneficial use of high water content solid waste materials to a greater extent has increased tremendously. Using woven geotextile tubes as confinement and dewatering facilities for industrial, municipal sludges, and dredged materials offers various advantages to expand and enhance existing beneficial use strategies. To be successful, proper design of geotextile tubes is ...


    By Inderscience Publishers

  • Dewatering of Industrial Sludge - Case Study

    At Ten Cate Protect, town of Nijverdal, The Netherlands, 2006 During the wastewater treatment process at Ten Cate Protect large quantities of sewage sludge are liberated. A couple of days per week this sludge is transported in tanker trucks to a waste disposal plant. On June 14th 2005 a Geotube MDS unit was put in operation at Ten Cate Protect to separate and condense the sludge of the aerobic ...

  • Geotube Dewatering for Lagoon Sludge - Case Study

    Background In many animal waste management schemes it is desirable to separate solids from waste water and/or manures. In cooperation with the Department of Animal and Dairy Science, animal waste specialists from Biological and Agricultural Engineering are field testing a technology new to agriculture, to remove solids from lagoons. The test is currently being conducted at the UGA Dairy ...

  • Dewatering of Mineral Particles Out of Process Water - Case Study

    Company: Nedmag Industrie bv Veendam, The Netherlands Previous situation: Continuously Dewatering 4,5 m3 process water out of a decanter with an average dry solid content of 1% in 1 m3 bags. Pour dewatering efficiency and flow rate Labour intensive handling of 1 m3 bags Labour intensive changing of filling line ...

  • Lagoon and Ditch Sediment Dewatering Utilizing Geotube Preliminary Pilot Demonstration - Case Study

    Project Background Geotubes have proven to be a practical and economical way of dewatering a number of domestic and industrial sludges, and sediments, such as river and lake sediments and contaminates, wastewater lagoon sludge, water treatment plant sludge, packinghouse sludges and wood products sludges. The Michigan Department of Environmental Quality (MDEQ) is interested in evaluating ...

  • Municipal Wastewater Treatment Plant - Moss Creek Plantation, Bluffton, SC (Wastewater Treatment) - Case Study

    THE CHALLENGE Moss Creek Plantation is a picture-perfect golf course community of 980 residences in the low country of South Carolina. The Moss Creek Owners Association (MCA) owns and operates Water Oak Utility, which treats about 450,000 gallons per day. The utility also contracts with Beaufort-Jasper County to treat some of their waste stream. James Buckner, Utility Operations Manager, ...

  • Activated Sludge Treatment Plant - Eatonton, Georgia - Case Study

    Solids management at municipal wastewater treatment plants is crucial in maintaining operating efficiencies and permitted discharge levels. Drying beds and mechanical methods of dewatering bio-solids can be labor intensive and inefficient for rapid solids removal. Miratech Geotube" Dewatering Technology offers munic-ipalities a cost effective solution for rapid solids removal and long term solids ...

  • Municipal WWTP Digester Cleanout - Cambridge, Ohio (Wastewater Treatment) - Case Study

    THE CHALLENGE Cambridge, OH is a small town of 13,000 residents. Tim Wheatley, Superintendent of the Water Pollution Control Center operates a 3 MGD activated sludge plant at about 80% of its capacity. The plant recently switched from anaerobic digesters to an aerobic digester. They had been dewatering Iheir sludge on four vacuum assisted drying beds housed in a large shed. Alternatively, ...

  • Commissioning and re-design of a ”class a” thermal hydrolysis facility for pre-treatment of primary and secondary sludge prior to anaerobic digestion

    ABSTRACT Thermal hydrolysis of sewage sludge as a pretreatment technique for producing a “Class A” sludge, with existing (or new) mesophilic anaerobic digestion systems are presently being considered for wastewater treatment plants in the USA and Canada. In Europe, a number of innovative hydrolysis systems have been installed or are planned. One technology sold under the trade name CAMBITM has ...


    By Cambi AS

  • Wastewater Treatment Plant - Newport, New Hampshire - Case Study

    THE CHALLENGE Newport, New Hampshire is a small New England community of 6000 residents. The treatment plant treats primarily residential sewerage, although Newport is home to an internationally known firearms company, which also sends its waste to the municipal plant for treatment. This 1.3 MGD plant which operates at an average of .75 MGD, was built in 1971 and upgraded in 1988 to ...

  • Faroe Maritime Technic provide total solution for treating Oily Sludge and contaminated Oily Water

    We at Faroe Maritime Technic provide total solution for treating Oily Sludge and contaminated Oily Water. Firstly our products - The Sludge Dewatering Separator and The Oil Conveyor are developed for the marine industry, but the same need is also on Power plants on shore. All Oily driven Power plants have these same need for treating Oily Sludge. A brief introduction of our products. ...


    By Faroe Maritime Technic

  • Nothing phases T-T controls case study

    On Thursday 24th March 2011 a London Underground tube line was suspended after a station was flooded by water leaking from the fountains at Trafalgar Square. Contractors working for the Greater London Assembly accidentally chopped through a section of water pipe which feeds the fountains. The London fire brigade was called shortly after 10am with one engine on the scene to pump out water which ...


    By T-T Pumps Ltd.

  • Metal finishing - Columbia manufacturing company - case study

    Application Columbia Manufacturing Company of Westfield, Massachusetts began producing bicycles in 1877. The company, while still producing bicycles, transitioned its core product line to institutional furniture with chrome plated bases made from tubular steel. Large amounts of potable water were required for the old plating system. The company was using 180,000 gallons of potable water a ...


  • Best management practices (BMPS) for discharging water from a construction site

    Having problems on your job site with regulations related to pumping water from your site? Discharge water may carry harmful compounds that can, and have affected our water quality and the ecosystem, hence the environmental agencies concerns. When pumping from dewatering systems, storm water management ponds (SWMPs), excavations or trenches, or any form of surface runoff, BMPs are needed to ...


    By Aquatech Dewatering Company

  • Small-Scale Biosolids Composting

    Cambridge, Ohio retrofitted a portion of its vacuum assisted drying beds into a covered composting facility, processing about 300 dry tons/year of biosolids and wood chips. Like many small communities in an agricultural area, the City of Cambridge, Ohio (pop. 14,000) managed biosolids generated by its 2.25 mgd Water Pollution Control Center (WPCC) via land application on farm fields. “Then ...


    By BioCycle Magazine

  • Poultry Food Short

    This facility processes, seasons, cooks, and flash-freezes poultry products and wanted to increase their production. The existing wastewater system could not meet the discharge requirements to the local POTW (city) and more stringent limits were imposed as a condition of their expansion. The facility was looking at a tremendous capital improvement cost to increase the size of their wastewater ...


    By Integrated Engineers Inc.

  • Case study - Halifax Water

    A section of the 30" diameter LCP Halifax-Bedford connector pipeline was identified by the client as being high-risk as it operated at a relatively high pressure (over 170psi), supplied a rapidly growing community and ran past residential areas along side of a highway. It would have been difficult to remove the line from service so Halifax Water selected PipeDiver to carry out a condition ...


    By Pure Technologies

  • Replacement of a Multiple Hearth by a Fluid Bed Incinerator - The Greensboro Experience (PDF - File size 50K)

    ABSTRACT The incinerator at the T.Z. Osborne Plant in Greensboro, North Carolina burns sludge from its own Waste Water Treatment Plant and sludge pumped from the nearby North Buffalo plant. The two plants have a combined capacity of 36 million gallons per day of wastewater. In 1992, the Osborne plant concluded a study evaluating its options for future municipal sewage sludge disposal. The ...

  • Oil skimmers solutions guide: wastewater treatment industry

    Growing Snack-Food Manufacturer Reduces Costs, Recycles Waste A privately held snack-food manufacturer in Ohio expected to increase production of potato chips by 20%, to about 72 million pounds a year. While more potato chips would mean more profits, it also would mean more oil-laden wastewater from washing the potatoes and the fryers used to cook them. PROCESS: When ...


    By Oil Skimmers, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you