diesel emissions monitoring Articles

  • WHO report on diesel fumes puts sharp focus on need for effective monitoring

    The World Health Organisation this month reclassified the dangers of diesel exhaust fumes, upgrading the risk from probably carcinogenic to a definite cause of cancer. The WHO report is based on the findings of research on workers in high risk areas, and puts a sharp focus on the need for effective monitoring in industries such as mining, rail, transportation, construction, power generation and ...


    By Shawcity Limited

  • In-situ continuous emissions monitoring & regulatory compliance

    As environmental scrutiny has risen and regulation has tightened in recent years, the importance of having accurate information on the environmental performance of your power plant has increased. After all, if you want to manage something, you need to be able to measure it. The analogy is obvious; you wouldn't start a diet without first investing in a set of scales. So it is with Continuous ...

  • Monitoring CO2 emissions from new passenger cars and vans in 2014

    The European Environment Agency (EEA) supports the European Commission (EC) and European Union (EU) Member States in the monitoring of the carbon dioxide (CO2) performance of passenger cars, in accordance with Regulation (EC) No 443/2009, and of light commercial vehicles, in accordance with Regulation (EC) No 510/2011. The regulation for passenger cars sets a CO2 emission (1) target of 130 g ...

  • Monitoring CO2 emissions from passenger cars and vans in 2013

    The European Environment Agency (EEA) supports the European Commission in the monitoring of the CO2 performance of passenger cars, in accordance with Regulation (EC) 443/2009, and of light commercial vehicles in accordance with Regulation (EC) No 510/2011. The regulation for passenger cars sets a CO2 'specific emission' (1) target of 130 g CO2/km by 2015 whilst the regulation for light commercial ...

  • Dust monitoring

    Generally, two different approaches are used to measure the amount of dust deposited on a surface; Determination of the soiling of a surface, by a change in its properties; Determination of the quantity of dust deposited, by weight. WHAT IS DUST? Dust is a generic term used to describe fine particles that are suspended in the atmosphere. Dust comes from a wide variety of sources, including soil, ...


    By Queensland Laboratory

  • Soot level – a diesel engine lube oil condemning limit

    While there is widespread disagreement on used-diesel oil condemning limits, it is well known that excessive soot in the lube oil causes abnormal valve and injection-train wear.  It can also increase exhaust emissions and clog filters.  Typically, the suggested limit for soot is in the neighborhood of 3% but can go much higher.  With the new ASTM Method D7686, truck, bus, ...


    By Spectro Scientific

  • Warehouse Optimization: Balancing Equipment Performance and Worker Safety Through Emissions Measurements and Air Quality Monitoring

    Successful warehouse functionality is dependent on both maximizing equipment performance and providing a safe and healthy environment for workers that encourages productivity. However, these two factors are often at odds with each other as warehouse equipment such as forklifts, burnishers and delivery trucks emit toxic gases that can have the potential to create poor indoor air quality which ...

  • Monitoring CO2 emissions from new passenger cars in the EU: summary of data for 2012

    For the third successive year, the European Environment Agency (EEA) has collected EU Member States' data on passenger car registrations, in accordance with Regulation (EC) No 443/2009. All Member States reported information on Carbon dioxide (CO2) emissions and the mass of cars, together with other vehicle characteristics. This data was used to evaluate the performance in 2012 of the new vehicle ...

  • Understanding and Monitoring Hydrocarbons in Water

    Untitled Document 1. Introduction Oil contamination continues to be a very hot topic, due largely in part to recent catastrophic events with shipping ...


    By Arjay Engineering Ltd.

  • Real-World Vehicle Emissions: A Summary of the Seventeenth Coordinating Research Council On-Road Vehicle Emissions Workshop

    The Coordinating Research Council, Inc. (CRC) held its 17th On-Road Vehicle Emissions Workshop in March 2007, where results of the most recent on-road vehicle emissions research were presented. We summarize ongoing work from researchers who are engaged in improving our understanding of the role and contribution of mobile sources to ambient air quality and emission inventories. Participants in the ...

  • Portable IR Analyzer Provides ASTM Field Test Method for Measuring Soot Levels In Diesel Engine Lubricating Oils

    The InfraCal Soot Meter, from Wilks Enterprise, gives users an approved ASTM testing method for measuring the percent level of soot in diesel engine lubricating oils -- ASTM Method D7686-2011 entitled “Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) instrument.” While there is widespread disagreement on used-diesel ...


    By Spectro Scientific

  • Black carbon emissions of individual cars measured under real conditions

    Measurements of individual vehicle emissions are usually made in laboratory tests. In this study, researchers followed cars driving in real conditions to measure emissions of air pollutants, including black carbon and nitrogen oxides. The study shows that diesel cars contribute disproportionately to air pollution, and highlights the value of on-road measurements. Vehicle traffic is a major source ...


    By European Commission

  • Mobile Stationary Source Emissions Testing, Coming to a Facility Near You?

    Last week, Antea Group had the unique opportunity to perform a RATA (relative accuracy test audit) of the emissions from a thermal oxidizer at an ethanol production facility located in Minnesota using a state-of-the-art mobile testing laboratory. During this RATA audit, actual stack emissions levels (including NOx, SOx, CO2, CO, O2, flow rate, temperature, velocity and pressure) from the ...


    By Antea Group - USA

  • Air quality Monitors Track Pollution Hot-Spots

    Situated in the south west of Wales, in a largely rural area bordering the Brecon Beacons, Carmarthenshire’s air quality is predominantly good. However, there are areas of concern where major roads pass through some of the County’s larger towns, including Llanelli, Carmarthen and Llandeilo, where air quality is dominated by the effects of road traffic. The County Council is therefore ...


    By Air Monitors Ltd.

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


  • Fast, simultaneous and continuous monitoring of NOx and NH3 in DeNOx applications

    In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions (slip), to reduce environmental impact and cost of reagents. To optimize this process, it is essential to use an emissions analysis system for simultaneous and continuous monitoring of NOx and NH3. For preparing ...


    By Environnement S.A

  • CAS DataLoggers Helps You Get Ready for RICE NESHAP

    Manufacturers across the country are scrambling to prepare for RICE NESHAP, an incoming EPA regulation intended to reduce pollutants from several categories of new, existing and reconstructed stationary engines. The focus is on air toxics, and all applicable diesel and non-diesel engines must be retrofitted with an emission control product to meet the new requirements by 2013. Every diesel ...


    By CAS DATALOGGERS

  • Marine Industry experience with Aalborg Industries

    Port Authorities and Governing Bodies state that a ship cannot emit smoke of >20% opacity for more than 3 minutes when in port. The IMO set similar limits for on-board incinerators. The DSL-220 Opacity Monitor has been used successfully to measure smoke emissions from diesel engines, incinerators and boilers on board ship ensuring that environmental concerns are ...


    By DynOptic Systems Ltd

  • DC Water Taps Into Biodiesel’s Sustainability Benefits

    Sustainability is more than a buzzword at DC Water. Ingrained throughout the agency, sustainability is in high gear at DC Water’s fleet division where biodiesel fuel powers all 230-diesel vehicles, and emissions are closely monitored. “Biodiesel just makes sense,” said Timothy Fitzgerald, Director Fleet Management for DC Water. “We switched to biodiesel in 2007 ...


    By National Biodiesel Board

  • High Tech Environmental Vehicles for High Tech Environmental Equipment Supplier

    Here is a conundrum. What do you do if you are a leading environmental monitoring technology supply firm, specialising in air quality monitoring, and your single biggest environmental impact comes from your own fleet of company vehicles? The problem is compounded when you factor in your large team of field service engineers travelling the length and breadth of the UK and your ISO 14001 ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you