dioxin emissions Articles

  • Wet Electrostatic Precipitation Demonstrating Promise for Fine Particulate Control

    Editor’s Note: Part l of this two-part feature on wet electrostatic precipitation (wet ESPs) outlines the need for multi-pollutant air pollution control technologies, the basics of wet and dry electrostatic precipitation, the ability of wet and dry ESPs to treat fine particulate, and the use of wet ESP technology at Northern States Power Company’s Sherco Station. Part II will explore the key ...


  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...

  • Cleaning up by cleaning up

    Historically, some big businesses have made big messes. Greenhouse gas emissions, oil spills and unsafe water have become unsavoury but all-too-commonplace topics in the news and industry is beginning to sit up and take notice. Within the past couple of decades, businesses have been cropping up in Saskatchewan with the goal of cleaning up others’ messes - or simply keeping a mess from ...


    By OZONATOR Industries Limited

  • Wet electrostatic precipitators offer cost-effective solution for HZL - Case Study

    An array of complex air pollution issues places the metallurgical industry among the largest potential sources of pollutants, and one of the most tightly regulated industrial sectors. One fully integrated, nonferrous metal producer in India, however, is demonstrating that a company with a determined commitment to environmental protection, energy efficiency and sustainability can succeed in ...


    By Beltran Technologies, Inc.

  • EPA finalizes boiler NESHAP

    EPA published the final National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions. EPA developed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater than 25 tpy of ...


    By Trinity Consultants

  • Iron and Steel Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • EPA Proposed “Franken-MACT” for Utilities

    EPA published the highly anticipated proposed Maximum Available Control Technology (MACT) Standard for the utility sector (40 CFR 63 Subpart UUUUU). When considered together with the growing list of proposed and final rules impacting the utility sector (Transport Rule/Cross-State Rule, Coal Combustion Byproducts Rule, Cooling Water Intake Rule, Regional Haze Rule, revised National Ambient Air ...


    By Trinity Consultants

  • Evaluation of Ecological Risks Associated with the use of Chlorine Dioxide for the Bleaching of Pulp: Scientific Progress Since 1993

    1.1 Scope and Objectives A small number of viable options are presently available for the bleaching of wood pulp (delignification and brightening) during the manufacture of pulp and paper. The use of chlorine dioxide (ClO2) in the bleaching process has largely superceded the earlier use of Cl2, or elemental chlorine, in the majority of North American pulp mills: It was discovered over a decade ...

  • Trade sustainability impact assessment on the environmental goods agreement - Case Study

    EXECUTIVE SUMMARY On 24 January 2014 at the World Economic Forum in Davos, the EU, together with 13 other WTO members pledged to launch negotiations to liberalise global trade in environmental goods (EGs). The negotiations are employing the Asia-Pacific Economic Cooperation (APEC) list of environmental goods as a starting point with the intent of expanding it to liberalise a "broad ...


    By OZONATOR Industries Limited

  • Pulp and Paper Mills Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • EPA proposes updates to CISWI rules

    On June 4, 2010, the U.S. EPA proposed updates to the Standards of Performance for New Stationary Sources (NSPS) for Commercial and Industrial Solid Waste Incineration (CISWI) Units (NSPS Subpart CCCC) and Emission Guidelines (EG) for Existing CISWI Units (EG Subpart DDDD), collectively referred to as the "CISWI Rules." In order to describe the proposed updates to the CISWI Rules, it is necessary ...


    By Trinity Consultants

  • Monitoring - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Baseline Projections of Selected Waste Streams

    Abstract Waste represents an enormous loss of resources both in the form of materials and energy. Indeed, quantities of waste can be seen as an indicator of the material efficiency of society. Waste generation is increasing in the European Union, and amounted to about 3.5 tonnes of solid waste per person in 1995 (excluding agricultural waste) 1 Excessive quantities of waste result from: ...

  • Black Carbon – the elephant in the room!

    Traditionally, ambient particulates have been measured gravimetrically according to their size. However, in this article Jim Mills, Managing Director of Air Monitors, will demonstrate that the time has come to change or at least augment the way ambient particulates are monitored and regulated. Air Monitors has supplied most of the UK's ambient monitoring network, but Jim will explain why the ...


    By Air Monitors Ltd.

  • Foundries Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Costs of air pollution from European industrial facilities 2008-2012

    In 2011, the European Environment Agency (EEA) published a first assessment of the costs of air pollution caused by European industrial facilities. The report Revealing the costs of air pollution from industrial facilities in Europe (EEA, 2011) applied a simplified modelling approach to assess the damage costs to health and the environment in 2009, caused by pollutant emissions from industrial ...

  • Persistent Organic Pollutants (POPs) in the European Atmosphere: An Updated Overview

    The industrial revolution and the resultant technological society have led to a continuous production and emission of new toxic substances causing gradual and widely diffuse adverse effects to the entire planet usually known as Global Environmental Changes. Climate change, ozone depletion and global distribution of persistent organic pollutants (POPs) are, among other, important examples of ...


  • Wood Preserving Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Supercritical water oxidation presented as alternative to incineration – An update

    Environmentally benign waste disposal is becoming a more and more acute problem. A process now being commercialised, supercritical water oxidation is demonstrating extremely efficient organic waste destruction (99.99%) plus excellent environmental characteristics (none of the emissions associated with incineration). The process is especially suitable for the treatment of wastewater and sludges ...


    By SCFI Group Limited

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you