dioxin removal Articles

  • Carbon Injection Proves Effective In Removing Dioxins

    Untitled Document Summary: During the past several years, there has been growing concern about emission of polychlorinated di-benzo-p-dioxins and polychlorinated ...

  • What is a wastewater treatment system and how does it work?

    For industrial companies producing wastewater as part of it’s process, some type of wastewater treatment system is usually necessary to ensure safety precautions and discharge regulations are met. The most appropriate wastewater treatment system will help the facility avoid harming the environment, human health, and a facility’s process or products (especially if the wastewater ...


    By SAMCO Technologies, Inc.

  • In-Pile thermal desorption for treatment of Dioxin-Contaminated soil in Japan

    Abstract A demonstration of thermal treatment of dioxin-contaminated soil was completed in Japan, under the sponsorship of the Japan Ministry of the Environment. TerraTherm’s proprietary In-Pile Thermal Desorption process was demonstrated to successfully treat the soil to the required standard of 1,000 picograms of 2,3,7,8-tetrachlorodibenzodioxin (TCDD) toxic equivalents (TEQ) per ...


    By TerraTherm, Inc.

  • On-Site Thermal Desorption of PCP- and Dioxin-Contaminated Soil at the Coleman-Evans Wood Preserving Site, Whitehouse, Florida, USA

    ABSTRACT Roy F. Weston, Inc. (WESTON®) has designed an indirect thermal desorption process (known as the LT3-HT) to treat solids and sludges contaminated with hazardous and toxic materials. The LT3-HT is a high-temperature, high-capacity thermal desorption system designed for treatment of semivolatile and volatile organic contaminants that require high treatment temperatures. The LT3-HT ...


    By Weston Solutions, Inc

  • Large project to remove PCBs from 1,475 transformers at ENECO, Rotterdam

    In November 2001, the Utility Partner department of ABB in Benelux received an order from ENECO Energie for a large-scale project: cleaning or replacing 1,475 transformers containing PCB-polluted ...

  • Pollutant emissions from modern incinerators

    Emissions of dioxins are mainly from incinerators, domestic and industrial coal combustion, and traffic. However, the major public concern and research effort are associated with the emissions of organic micropollutants from waste incinerators. This paper gives a brief overview of the more recent research and development for the removal of dioxins and heavy metals from flue-gas streams. Special ...


    By Inderscience Publishers

  • Chemical and toxicological assessment of a full‐scale biosolid compost

    The impact of a full‐scale biosolid composting plant on the fate of a broad range of priority organic pollutants was investigated. Chemical analysis was performed at different steps of the process during two seasons. Simultaneously, the toxicological quality was assessed using estrogen α‐, dioxin‐, and pregnane X‐receptor reporter cell lines. Mass‐balance calculation highlighted the removal of ...


    By John Wiley & Sons, Ltd.

  • Chlorinated hydrocarbons - Case Study

    Example: Pharmaceutical industry Similar tasks: Chemical industry The Pharmaceutical industry uses different processes to create chlorinated hydrocarbons. In a regenerative thermal oxidiser (RTO) the chlorinated organic contaminants are destroyed at high temperature. Chlorinated hydrocarbons - among others - are converted into hydrogen chloride which produces a ...

  • High‐throughput screening of PCDD/Fs and PCBc in sediment: Development and application of a novel method for high‐throughput determination of PCDD/Fs and PCBs in sediments

    A selective pressurized liquid extraction (SPLE) technique was developed for the simultaneous extraction of polychlorinated dibenzo‐p‐dioxins/dibenzofurans (PCDD/Fs) and dioxin‐like polychlorinated biphenyls (dl‐PCBs) from contaminated sediments. The final method incorporated cleanup adsorbents (Florisil, alumina, and silica) into the extraction cell in a 1:1 matrix to individual adsorbent ...


    By John Wiley & Sons, Ltd.

  • Multiple stage scrubbing and adsorption system for Incinerator exhaust at an industrial waste processing plant

    Challenge Monroe Environmental was called upon to purify a 20,000 CFM exhaust stream that was being discharged from an industrial waste incinerator at 2000° F. The pollutants that needed to be removed were: Fine Ash Particulate HCL Gas Mercury Dioxins The combination of soluble and solid pollutants, coupled with the ...

  • Sources of PCDDs/PCDFs In Cement Kiln Emissions

    Abstract This paper presents data on the source of PCDDs/PCDFs in cement plant stack emissions, demonstrating that these emissions are not necessarily all created by the process. The data potentially demonstrates that some of the PCDDs/PCDFs in the emissions are pre-existing dioxins and furans that are vaporized out of the kiln raw feed. This calls into question the assumption that PCDD/PCDF ...


  • A study of the reaction of ferrate with pentachlorophenol – kinetics and degradation products

    Pentachlorophenol (PCP) is a persistent pollutant which has been widely used as a pesticide and a wood preservative. As PCP is toxic and is present in significant quantities in the environment, there is considerable interest in elimination of PCP from waters. One of the promising methods is the application of ferrate. Ferrate is an oxidant and coagulant. It can be applied as a multi-purpose ...


    By IWA Publishing

  • Report: Recycling of flame-retarded plastics from waste electric and electronic equipment (WEEE)

    Shredder residues produced in plants processing waste electric and electronic equipment are excluded from material recycling due to a variety of polymeric materials and the presence of brominated flame retardants (BFR), which might contain banned polybrominated diphenyl ethers or toxic polybrominated dioxins and furans (PBDD/F). Herein we present a technological approach to transfer a significant ...


    By SAGE Publications

  • A Citizen`s Guide to Chemical Dehalogenation

    What is chemical dehalogenation? Chemical dehalogenation is a chemical process to remove halogens (usually chlorine) from a chemical contaminant, rendering it less hazardous. Halogens are a class of chemical elements that include chlorine, bromine, iodine, and fluorine. Polychlorinated biphenyls are halogenated compounds that once were used in high voltage electrical transformers because they ...

  • Flux force condensation scrubbing

    Flux force condensation scrubbing technology is used to capture fine (submicron) particulate at extremely high efficiency. It is a preferred method when using wet scrubbing to collect and control dioxins from combustion sources. As an added benefit, through the use of condensation, the water vapor plume commonly associated with a wet scrubbing system can be effectively eliminated. The overall ...


    By Bionomic Industries Inc.

  • Dosing and mixing of powdered activated carbon for flue gas applications

    Subject: Powdered activated carbon (PAC) is dosed in dry powder form into flue gas for the removal of dioxins, furanes, mercury and other heavy metals from flue gases. Gericke supplies complete solutions for the handling of bulk solids. These complete installations are characterized by their clean, accurate, trouble- and dustfree operation. Application: Furnaces, incinerators, sinter ...


    By Gericke

  • Superfund Remediation: The Key to Land Reuse Case Study

    The technology is ready and, with state and federal tax credits waiting, the economics look better than ever: New Jersey, one of the first states to be industrialized, finds itself plagued with the contaminated aftermath of pre-EPA industries: soil contamination. From superfund sites to the gas station whose underground storage tank has been oozing for the last 20 years, every ...


    By CR Clean Air Group, LLC

  • Incineration

    Introduction: High temperatures, 870 to 1,200 °C (1,400 to 2,200 °F), are used to volatilize and combust (in the presence of oxygen) halogenated and other refractory organics in hazardous wastes. Often auxiliary fuels are employed to initiate and sustain combustion. The destruction and removal efficiency (DRE) for properly operated incinerators exceeds the 99.99% requirement for hazardous waste ...

  • Solid waste gasification pollution abatement - Case study

    Catalytic Products International has partnered with a Gasification System Designer in the design and supply of a unique thermal oxidizer for use with a closed loop batch pyrolysis gasification system. The gasifier is engineered to create a clean combustible syngas from a broad spectrum of dissimilar carbonbased solids, liquids, and other feedstocks. The QUADRANT NR – SEVERE DUTY Thermal ...

  • Minergy GFT Permitting Feasibility Report

    A 39-mile stretch of the Fox River and portions of Green Bay in northeastern Wisconsin (the Fox River site) are contaminated with polychlorinated biphenyl (PCB) laden sediment. The contamination was caused by historical effluent discharges from paper mills manufacturing and/or recycling carbonless paper that utilized dyes dissolved in PCBs. PCBs are the primary contaminant of concern; however ...


    By Minergy Corporation Limited

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you