disk recycler Articles

  • Industrial container recycling simplified by oil skimmer

    Barrel Reconditioning Industries (BRI) of Cottage Grove, MN builds recycling systems for both metal and plastic containers, including lubricating fluid drums and barrels. A typical BRI system consists of several integrated machines or stations, including a solvent preflush and a high pressure water wash. The water wash presents two distinct problems. First, oil and grease contaminated wash water ...


    By Abanaki Corporation

  • Energy from waste: the recycling of limed fleshings

    Leather products have been around a long while - there are those who claim that it is the second oldest business in the world. Going back a few millennia, when our earliest ancestors decided that sitting on hard rock was not a soft option, they turned to other materials in order to create more comfortable seating, as well as warmer bedding and improved clothing. Animal skins became the fabric ...


    By Flottweg SE

  • Waste Minimisation and Recycling: Fletcher Construction Australia

    A test project involving simple, practical waste minimisation and recycling measures, has helped Fletcher Construction cut its waste removal cost by more than half. The measures did not involve any capital cost, but they have resulted in substantial savings to both the company and the environment: savings of 55% were achieved on waste removal costs through recycling and input reduction, which ...


  • Why Rare Earth Recycling is Rare (and What can We Do About it)

    Earbuds, touch screens, CFLs with a warm glow, rechargeable batteries and power windows: Most of us take these things for granted. When we do, we also take for granted a group of elements called rare earth metals, whose special electronic and magnetic properties make them a key component of many 21st century technologies. These 17 elements are actually plentiful enough — you probably have ...


    By Ensia

  • (Let) electronic data media be shredded - Case Study

    When disposing of digital data media, it is advisable to take care, as untold amounts of confidential data are stored on our computers, USB sticks, CDs and DVDs etc. and represent a security risk, above all for trading companies. But what happens to these storage media at the end of their life? The Federal Office for Data Security makes an unequivocal recommendation that the rule for hard disks ...


    By HSM GmbH + Co. KG

  • Choosing an Oil Skimmer for the Machine Shop

    Advantages of Using an Oil Skimmer: The use of an oil skimmer in the machine shop setting holds many benefits. Removing the oil from a machine coolant tank will initiate some esthetic benefits such as cutting down on the amount of smoke generated from the cutting tool coming into contact with oil laden coolant. When a machine is shut down for the weekend, oil has a chance to come to the ...


    By Abanaki Corporation

  • Compact fragmentising machines for user-orientated solutions

    MERCODOR GmbH Sondermaschinenbau KG has been manufacturing custom-made fragmentising machines for volume reduction and recycling for 30 years. In particular, the compact design of the fragmentisers allows decentralised use under difficult local conditions. Besides traditional areas of use, such as fragmenting production residues and waste in the form of wood, paper, glass, metal chips, food ...

  • Pin Mill helps cosmetics producer meet quality standards

    With seven manufacturing and distribution facilities, totaling more than 2.5 million sq ft (232,225 sq m), Cosmetic Essence, Inc. (CEI, Holmdel, NJ) claims to be the leading global provider of services to the personal care industry. While the bulk of its business is contract production and packaging of products for the world's brand name cosmetics companies, CEI also does research and development ...

  • Innovative Dryer and Emission Control System at a Particleboard Installation

    In 1989, Bohemia Corporation installed a new primary drying system and also air pollution control equipment at their particleboard plant in Eugene, Oregon. The drying system was composed of a Westec America triple-pass rotary drum dryer fired by a Coen sanderdust burner. The primary and secondary particulate collectors installed were also of a Westec America design. The tertiary air pollution ...

  • SMS alerts with AEMS on Cory Envrionmental landfill site case study

    Application Landfill gas monitoring Equipment AEMS Location United Kingdom Customer Cory Environmental Requirement The customer was looking for a ‘smart’ gas monitoring system to continuously monitor landfill gas concentrations and pressure and ...


    By Geotech

  • Corrosion Control in data Center

    CORROSIVE GASES: Small concentrations, serious consequences EU standard 2002/95/EC, or RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), which was implemented in July 2006, restricts the use of hazardous substances in the manufacture of electrical and/or electronic equipment. One of the banned substances is lead (Pb), which is used for soldering ...


    By Bioconservacion SA

  • Ontario launches new e-waste initiative

    The Ontario Electronic Stewardship (OES) has launched an ambitious program that over the next five years will divert 160,000 tonnes of waste electronics such as computers and televisions away from landfill and into reuse and recycling solutions. The industry-developed and operated Waste Electrical and Electronic Equipment (WEEE) program is setting up a network of collection sites where consumers ...


    By GLOBE Foundation

  • Skimming Oily Wastewater

    As large generators of oily wastewater tighten effluent controls, the U.S. Environmental Protection Agency (EPA) is targeting smaller generators. Some of the firms receiving their attention are smaller manufacturing plants, automotive garages, mobile equipment service shops and truck farms. Many of these firms do not have access to a sanitary sewer system that will accept oily wastewater. Because ...


    By Abanaki Corporation

  • Abanaki`s versatile high-temp poly belt well-suited for Fracking wastewater oil removal

    Abanaki Corporation has been successfully providing oil skimming technology to wastewater treatment plants in the removal of oil from fracking wastewater. Due to the variety of contaminants found in fracking wastewater, the suitable oil skimmer belt for this particular application is ...


    By Abanaki Corporation

  • Research Projects Add Value to MSW Composting Facility

    Untitled Document By combining upfront separation for recyclables with intensive composting of MSW and biosolids, Florida's Sumter County ...


    By BioCycle Magazine

  • Pulp and Paper Mills Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Toxins Found in E-Waste

    One of the worst effects of a skyrocketing, global e-waste crisis is the risk of toxic contamination for the environment and communities. In fact, delving into the many chemical and heavy metal materials that make up most electronic devices, it seems that toxins and electronics go hand in hand. Though many manufacturers of electronic devices are finding innovative ways to work around toxins found ...

  • Can mountains of animal bones boost food security in Ethiopia?

    By turning a wasted resource into fertilizer, researchers aim to help a hungry nation replenish depleted soils As unemployed young men pick through trash heaps near Jimma University in southwestern Ethiopia to find treasures to sell, they search for one of the hottest resources in demand at the moment: discarded animal bones. ...


    By Ensia

  • Creative Service Solutions - Case Study

    A paper mill in Finland suffered the complete failure of a large four-stage vacuum blower. Creative problem solving resulted in a repair time of only seven days. The maintenance team built a functional blower by using parts from three outdated machines. The combined efforts of Sulzer and of the paper mill’s own engineers made it possible. The paper industry has to cope with a ...


    By Sulzer

  • Achieving

    Introduction The leak repair requirements, under Title VI Section 608 of the Clean Air Act Amendments of 1990, require that when an owner or operator of an appliance that normally contains a refrigerant charge of more than 50 pounds discovers that refrigerant is leaking at a rate that would exceed the applicable trigger rate during a 12-month period, the owner or operator must take corrective ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you