dissolved metals analyzer Articles

  • Boiler Dissolved Oxygen Control

    DISSOLVED OXYGEN CHEMISTRY Dissolved Oxygen (DO) is a measure of the amount of oxygen, usually thought of as a gas, that is dissolved in a liquid such as water. Oxygen is essential to life and is also the most common element found taking part in corrosion reactions. DO can be thought of as the fuel needed for the corrosion process to proceed. It is the corrosion reactions that necessitate ...


    By IC Controls Ltd.

  • Application of generalized linear mixed model to analyze mixture toxicity: Survival of brown trout affected by copper and zinc

    Increased concerns about the toxicity of chemical mixtures have led to greater emphasis on analyzing the interactions among the mixture components based on observed effects. The authors applied a generalized linear mixed model (GLMM) to analyze survival of brown trout (Salmo trutta) acutely exposed to metal mixtures that contained copper and zinc. Compared to dominant conventional approaches ...


    By John Wiley & Sons, Ltd.

  • Sedimentation & Centrifugation World Markets Report

    Provides analyses & forecasts for centrifuges, clarifiers and thickeners, hydrocyclones and dissolved air flotation. Company analysis & segmented industry forecasts are included. Details are provided for municipal, chemical, pulp & paper, food, metals and other industries. One volume is exclusively devoted to individual company analyses. Rapidly growing segments, such as centrifuges ...


    By The McIlvaine Company

  • Stormwater retention basin efficiency regarding micropollutant loads and ecotoxicity

    Retention basin efficiency in micropollutant removal has not been very well studied, in particular for pollutants highlighted by the European Water Framework Directive of 2000 such as pesticides, polybrominated diphenyl ethers (PBDEs) and alkylphenols. This study is based on in situ experiments carried out on a stormwater retention basin with the aim of estimating the basin efficiency in ...


    By IWA Publishing

  • Chloride ions promoted the catalytic wet peroxide oxidation of phenol over clay-based catalysts

    Catalytic wet peroxide oxidation (CWPO) of phenol over clay-based catalysts in the presence and absence of NaCl was investigated. Changes in the H2O2, Cl−, and dissolved metal ion concentration, as well as solution pH during phenol oxidation, were also studied. Additionally, the intermediates formed during phenol oxidation were detected by liquid chromatography-mass ...


    By IWA Publishing

  • Continuous Modeling of Wet Weather Strategies Annual Water Quality Results Support a Municipality’s Decision-Making Process

    ABSTRACTAn extensive water quality modeling effort for the City of Columbus Long Term Control Plan (LTCP) was performed in order to evaluate future scenarios to abate combined sewer overflows. This modeling effort was supported by a massive data collection program and employed three different models to analyze the receiving streams. Once the models were selected and calibrated, continuous annual ...

  • Qualitative analysis and classification of surface water in Bukit Merah Reservoir in Malaysia

    An attempt was made to analyze and classify water quality at the Bukit Merah Reservoir (BMR) in Malaysia to determine the degree of pollution and ascertain the required treatment level before usage. Parameters determined included; pH, dissolved oxygen (DO), biochemical oxygen demand (BOD), chemical oxygen demand (COD), ammoniacal nitrogen (NH3-N), suspended solids (SS), total nitrogen (TN) and ...


    By IWA Publishing

  • Assessment of rainwater harvesting systems at a university in Taipei

    Rainwater harvesting systems (RWHSs), a pilot-scale one (PSR) and a full-scale one (FSR), at a university campus in Taipei were assessed. Characteristics of harvested rainwater were analyzed, including pH, electrical conductivity (EC), turbidity, alkalinity, dissolved organic carbon (DOC), total coliform (TC), concentration of 14 metals (Al, Ca, K, Mg, Na, Cu, Fe, Mn, V, Zn, Cd, Cr, Pb and Ni) ...


    By IWA Publishing

  • Struvite and Vivianite Screw Presses and Heat Exchanger Removal case study

    A regional wastewater treatment plant in Sonoma County was experiencing problems with struvite on their screw presses and vivianite on their heat exchangers. The design plant flow rate is 7.9 mg/day. They were using 7 mg/L to 10 mg/L (dry basis) of ferric chloride to control hydrogen sulfide and improve solids removal in the primary clarifier. The plant maintenance staff was forced to shut down ...


    By Struvite Removal

  • Effects of soil solution`s constituents on proton NMR relaxometry of soil samples

    Proton nuclear magnetic resonance (1H NMR) relaxometry has been used to analyze pore size distributions of wet porous samples. To make this method applicable to soil samples, knowledge about contribution from the soil solution to the total proton relaxation is needed. We extracted soil solutions from nine soil samples and determined transverse proton relaxation rates, the concentration of Fe, Mn, ...

  • REX Evaluation Guide

    REXTM (Real-timeElementalX-ray Fluorescence System) is the only instrument capable of unattended real-time elemental analysis of dissolved metallic contents in fluids using X-ray fluorescence with low parts-per-billion (ppb) sensitivity. Important applications exist for the following industries, among others: Municipal drinking water supply Chemical processing industry Mining ...

  • Moisture in Oils: The Three-Headed Beast

    Abstract Moisture contamination in in-service lube oils is perhaps one of the most destructive forms of engine corrosion second only to particle contamination.  Water contamination in oil can be categorized into three forms of water; Free, emulsified, and dissolved.  All forms of water have direct consequences to the oil and gears of the engine, but indirect consequences as ...


    By Arizona Instrument LLC

  • Why buy a Colorimeter

    Cyanide in your Juice? Mercury in your chicken soup? Your well water seems a little brown? Your wine causes you to pucker? There is a way to test for unknowns in solutions, waters and fluids. A colorimeter used to interpret the absorbance and/or transmittance of light entering a fluid, may be the way. ...


    By Geotechnical Services, Inc

  • Case study – military

    Introduction In 2009, a West Coast Military Air Base contacted CWT to bid on a plane washing wastewater treatment facility. The military needed to upgrade and replace their antiquated dissolved air flotation (DAF) unit to meet more stringent discharge requirements and attain higher contaminant reductions. Being a Federal Base, it was imperative for the military to have the best wastewater ...


    By Clean Water Technology, Inc.

  • Water Quality Models

    ' In order to determine the impacts of a particular discharge on ambient water quality, it is usually necessary to model the diffusion and dispersion of the discharge in the relevant water body. The approach applies both to new discharges and to upgrading of existing sources. This note provides guidance on models that may be applicable in the context of typical Bank projects.' Introduction ...


    By The World Bank

  • Success of Onlin Leads to Closing for Wastewater 2 Process Control of Consent Order Treatment Plant

    In 2003, Plant City, a small Florida city of 30,000 residents, faced a very big problem. The Florida Department of Environmental Protection (FDF.P) determined that the city's wastewater treatment plant was not consistently operating within its permit limits, and placed it under a consent order. Plant City is a highly industrialized area. "Our industrial loading is very diverse and includes metal ...

  • Ivey-sol technology has potential to increase oil recovery of oil-sands waste by 15-25 percent

    Alberta’s oil sands are comprised of one of the world's largest sources of bitumen, containing an estimated 1.6 trillion barrels. About two tonnes of oil sands must be dug up and processed to produce one barrel of oil. Oil sands recovery processes include extraction and separation systems to remove bitumen from sand and water. Separating the oil from the sand is difficult and costly, and getting ...


    By Ivey International Inc.

  • What are the treatment options for landfill leachate?

    New contributor to Water/Waste Processing aims to answer readers’ most pressing questions It’s said the United States has 1,654 landfills, handling more than 250-million tons of trash each year. One Washington landfill covers a 2,545-acre area, has a 120-million-ton capacity and a 40-year expected trash-receiving life. The facility, the Republic ...

  • Wastewater-Primary Treatment

    Primary Treatment is defined as a wastewater treatment process that takes place in a rectangular or circular tank and allows those substances in wastewater that readily settle or float to be separated from the water being treated. This process achieves solids separation. The solids readily available to settle to achieve sedimentation will do so in a settling tank referred as a clarifier. On the ...

  • Common Boiler Feed Water Treatment Issues and How to Avoid Them

    When treating boiler feed water (the combination of boiler makeup and condensate return water), several issues can arise that cause boiler scaling, corrosion, fouling, and system failure. Below, we break down the most common boiler feed water issues and how to avoid them to help ensure system efficiency and operational safety. While treating boiler feed water is extremely ...


    By SAMCO Technologies, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you