drainage chamber Articles

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • Predicting combined sewer overflows chamber depth using artificial neural networks with rainfall radar data

    Combined sewer overflows (CSOs) represent a common feature in combined urban drainage systems and are used to discharge excess water to the environment during heavy storms. To better understand the performance of CSOs, the UK water industry has installed a large number of monitoring systems that provide data for these assets. This paper presents research into the prediction of the hydraulic ...


    By IWA Publishing

  • 10 Flags in Valve Chambers that Should Make You Question What Else is Wrong

    I have reached the conclusion, as a lot of you may relate too, that I may be considered one of those “cranky old men”. It shows itself in the little things. Sentences starting with the phrase “when I was your age” or ...


    By Singer Valve Inc.

  • Environmental incident response, North-East England

    Project The Remediation Strategies Response Team were called-out to a manufacturing facility to assist with a potential pollution incident arising from contamination of the site’s surface water drainage system.  During weekend work, a concrete cutting contractor had disposed of a large volume of concrete cutting slurry into the site’s surface water drainage system.  ...


    By Remediation Strategies Ltd.

  • WaStop Access protects residents in Lewiston NY, USA - Case Study

    Location: Lewiston New York, USA Client: City of Lewiston Problem: The effect of combined sewers (combined wastewater and storm water) and an area prone to flooding from the Niagara River, a section of Upper Mountain Rd in Lewiston New York have experienced repeated flooded basements. On a visit with Jeffery Ritter of the City of Lewiston, Bob ...


    By Wapro AB

  • Fabrication of Silty Sand Specimens for Large- and Small-Scale Tests

    In the course of research concerning the relation of cone penetration results and liquefaction resistance, it was necessary to develop a reliable method for preparation of silty sand specimens for laboratory triaxial testing (3.6 by 7.1 cm in diameter) and for a large-scale calibration chamber (1.5 by 1.5 m in diameter). The objective was to simulate the in situ soil fabric and to allow for ...


    By ASTM International

  • THE BACTAERATOR™ - The Natural Sump Solution

    Cleveland Biotech Ltd, market leaders in environmental biotechnology, have developed a solution-focused product to banish the common problems of sumps and pumping stations called The Bactaerator®.  Many businesses from pubs to supermarkets, drainage contractors to water companies suffer with maintenance and management issues stemming from the problems caused by sumps, ...


    By Cleveland Biotech Ltd.

  • THE BACTAERATOR™ - for odour and blockage free pumping stations

    Cleveland Biotech Ltd, market leaders in the field of applied environmental biotechnology, have developed another market leading application system - The Bactaerator™. Sumps, wet wells and pumping stations provide continual problems to all those responsible with managing and maintaining them, from pubs and supermarkets to drainage ...


    By Cleveland Biotech Ltd.

  • The Bactaerator - the natural sump solution case study

    Cleveland Biotech Ltd, market leaders in the field of applied environmental biotechnology, have developed another market leading application system – The Bactaerator. Sumps, wet wells and pumping stations provide continual problems to all those responsible with managing and maintaining them, from pubs and supermarkets to drainage contractors and water companies. The problem most commonly ...


    By Cleveland Biotech Ltd.

  • Optimise inlet condition and design parameters of a new sewer overflow screening device using numerical model

    After heavy rainfall, sewer overflow spills to receiving water bodies cause serious concern for the environment, aesthetics and public health. To overcome these problems this study investigated a new self-cleansing sewer overflow screening device. The device has a sewer overflow chamber, a rectangular tank and a slotted ogee weir to capture the gross pollutants. To design an efficient screening ...


    By IWA Publishing

  • Shoreline property upgrade saved by Lightweight stormwater solution case study

    Renovating a residential property may be commonplace, however upgrades adjacent to the sensitive Bayou Texar estuary in Pensacola, FL, is a bit more difficult. The estuary is an ecologically sensitive area protected by the Florida Department of Environmental Protection. The consulting engineer and contractor had a problem; with limited space, how do they keep stormwater on site with the addition ...

  • Emergency response and clean-up of a diesel leak: manufacturing facility

    Project: Emergency response and clean-up of a diesel leak Client: Confidential manufacturing company Services: Emergency response planning, environmental assessment, regulator liaison, remediation design Summary: Through rapid site characterisation and expert decision making ESI minimised the environmental damage ...

  • How to drain 37 million of liters of water in just 14 hours

    Trollhätte canal, located in the Southwest part of Sweden, has a difference in altitude of 44 meters, handled by six locks. One single lockage demands 8000-12000 m3 of water. In May 2009, the lock system was closed down for maintenance and repair; this required four of the locks to be drained and kept dry for four days. Grindex pumps in the sizes Matador and Maxi were rented for the task. ...


    By Grindex Pumps

  • Kijlstra helps save time and space

    A pre-fabricated Combined Sewer Overflow (CSO) chamber from leading precast drainage manufacturer Kijlstra has helped contractor Clancy Docwra cut installation times and minimise disruption during a flood alleviation project for Scottish Water Solutions. The scheme involved upsizing the surface water drainage system and installing a CSO to protect homes in Kingsknowe Road North, located in the ...


    By Kijlstra LTD.

  • Oil Water Separator - Klargester has a specialist team who provide technical assistance in selecting the appropriate Separator for your application

    Klargester Separators - EN858 compliant, with full Environment Agency Approval (PPG3) To specify a nominal size Klargester Bypass Separator, the following information is needed:- The calculated flow rate (NS) or the drainage area served. Our designs are based on the assumption that any interconnecting pipework fitted elsewhere on site does not impede flow into or out of the separator ...


    By Kingspan Environmental Ltd

  • Cost effective solutions from Kijlstra

    Kijlstra, one of Europe’s biggest manufactures of off-site precast drainage products, is helping to provide significant cost reductions on a major water infrastructure project in the regency town of Royal Leamington Spa. Kijlstra is supplying CSO structures and river outfalls together with large valve chamber’s to framework sewerage contractor NMCNomenca, who are constructing a ...


    By Kijlstra LTD.

  • Model 8 oil grabber® removes small amounts of oil from plant drain water

    Problem: Worldwide, Reichhold Chemical Corp. produces some 5600 products. At St. Helens, Ore., they produce three -urea, ammonium nitrate and ammonia. Plant drain water is discharged into the Columbia River, and although oily residues are minuscule because of a concerted program to keep oil off the floors, some is present - drippage from ammonia compressors, vehicles and machine maintenance ...


    By Abanaki Corporation

  • Pumping Stations, Your Options

    There are many things to consider when thinking about pumping systems in developments, our Pumping Stations Manager talks through the options. Along with budgets, there are many factors to consider when choosing the right pumping station for a development, such as; Technical specifications – how much effluent is the pumping station going to need to remove? ...


    By T-T Pumps Ltd.

  • pipe fitting mold, irrigation piping system, irrigate fitting mould

    China pipe fitting mold, pipe fitting mould, mould, mold, moulds, molds, tool, plastic mould, plastic mold, injection mould, injection mold, pipe mould, pipe mold, fitting mould, fitting mold, PVC mold, PVC mould, PVC pipe mold, PVC pipe mould, PVC fitting mould, PVC fitting mold, PVC pipe fitting mold, PVC pipe fitting mould, PVC collapsible core, PVC ...


    By Focare Mould Co.,Ltd.

  • Diamond is the clear choice for redclyffe yacht club case study

    Located in a particularly beautiful location on the River Frome, surrounded by water meadows and local footpaths, the Redclyffe Yacht club provides a haven for both members and visitors. There are many pleasant walks and tourist attractions within easy distance of the club, including the local town of Wareham. The facilities at the clubhouse include showers and toilets. Over the years the club ...


    By WPL Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you