drainage plate Articles

  • Tideflex Valves - No Problem Solving Difficult Scenarios

    Square openings, existing fixings, angled walls, difficult access? Tideflex can engineer solutions for problematic retrofit and flap valve replacements every time. MeasurIT have been providing solutions to drainage outfall valve problems for almost 20 years. It doesn't matter if you need to retrofit a valve to a square opening, align it with existing fixings or drilled holes, or fix ...


    By MeasurIT Technologies Ltd.

  • Construction of a surface respository in the Ukraine case study

    As part of the shutting down of the nuclear power station in Chernobyl, a surface respository for weak to medium radio-active waste is being constructed around 30 km away from the power plant premises. The total building project JCSRM-Industrial Complexe for Solid Rodwaster Management) is sponsored by the EU and RWE Nukem GmbH, general contractors for these measures, commissioned NAUE GmbH & ...


    By NAUE GmbH & Co.KG

  • Investigation and Forecast Earthquake Damage for Sewage Systems

    ABSTRACTJapan is known as one of the areas where earthquake occurs most to be located in border of oceanic plate and continental plate. On this account, earthquake countermeasures are pushed forward triggered by the great Hanshin earthquake (1995), but measures for existing facilities are not yet enough. In such situation, the mid Niigata prefecture earthquake of October 23, 2004 attacked ...

  • Relining with corrugated steel pipe, Mississauga, ON

    Owner: Ministry of Transportation, Ontario Consultant: Morrison Hershfield Contractor: Underground Services Limited Location: Mississauga, Ontario With over 320,000 vehicles per day the intersection of Highways 401, 403 and 410 in Mississauga, Ontario, is one of the busiest in North America. At the same location can be ...


    By Armtec

  • Summary of the performance analysis of venturi orifice steam traps

    Over the last century steam traps have developed with various automatic valve arrangements using buckets, floats, thermostatic and thermodynamic valve arrangements. These traps all have moving parts which, in time, fail either, Closed - causing water-logging, corrosion and in some cases water hammer, or Open - leaking live steam and energy. Additionally when such traps fail open ...

  • Solving waste oil management and removal problems in power generating plants

    If your plant is like most, it is doing a good job of preventing oily water waste and waste oils from escaping into the environment. But at what cost? As labor resources dwindle, operating and maintaining drainage systems, oil separators, and sometimes inadequate oil removal equipment is expensive. Paying higher than needed costs for waste oil disposal, filtration and water treatment due to these ...


    By Oil Skimmers, Inc.

  • E.On on-site sewage treatment plant (Ratcliffe-on-Soar) case study

    Located in Nottinghamshire, E.On's Ratcliffe-on-Soar facility is one of the most efficient coal fired power stations in the UK. With a total generation capacity of 2,000MW it produces enough electricity to meet the needs of approximately 2 million people. In March 2008 WPL were contacted by E.On to enquire about a replacement sewage treatment ...


    By WPL Ltd

  • E.On on-site sewage treatment plant (Ratcliffe-on-Soar)

    Located in Nottinghamshire, E.On's Ratcliffe-on-Soar facility is one of the most efficient coal fired power stations in the UK. With a total generation capacity of 2,000MW it produces enough electricity to meet the needs of approximately 2 million people. In March 2008 WPL were contacted by E.On to enquire about a replacement sewage treatment solution to serve personnel located at the site's ...


    By WPL Ltd

  • Control water – control mold

    There is no single universal way to eliminate all mold growth. But the single most effective method of controlling mold is to eliminate their source of moisture. Moisture doesn’t just mean actual water; it can also be high humidity. Few molds grow when the humidity is under 70%. If they do, it is very slowly. It is safe to say that you cannot stop mold growth until you stop the moisture. ...

  • DFW direct bury of storm sewer case study

    Airport Solutions North Texas Contracting has placed the first HOBAS pipe at DFW International Airport in the Dallas/Fort Worth mid-cities. That first installation was a repair to an 84-inch corrugated steel culvert that had failed and created a sink hole approximately 30 feet deep and almost 20 feet in diameter after a series of heavy rains in 2007. North Texas Contracting of Keller, Texas ...


    By Hobas Pipe USA

  • 16 Oxiperm Pro disinfection systems with flushing capacity for Messe München

    The exhibition organisers need to provide different amounts of domestic water for different kinds of exhibitors. For example, an IT industry exhibition needs a different amount of water to a watersports exhibition. This means that the domestic water pipes need to be designed on basis of the shows which need largest volumes of drinking water. With all sorts of different occupants in the Munich ...


  • Processing Wastewater Sludge Using Dewatering Containers

    The relative cost of dewatering equipment varies widely and is directly related to the processing rate. For smaller utilities that need to dewater sludge in batches, dewatering containers are an alternative that can be relatively inexpensive and simple when compared to other technologies on the market. The most common type of dewatering container is based on a roll-off box design, although any ...


    By Flo Trend® Systems, Inc.

  • Flush Mounted Valve Exposed

    The “Other Guys'” answer to standing water??  The flush mounted valve. The “Other Guys'” answer to standing water is the Flush Mounted Valve.  This is a second valve that is installed adjacent to the primary valve and flush with the bottom of the insert allowing for complete drainage. As seen ...

  • Sick-building syndrome and building-related illness

    Significant health problems linked to very poor indoor air qualityIndoor Air Quality (IAQ) deals with the content of interior air that could affect health and comfort of building occupants. The IAQ may be compromised by microbial contaminants (mold, bacteria), chemicals (such as carbon monoxide, radon), allergens, or any mass or energy stressor are more prevalent than anyone could have predicted. ...

  • Assessment of Environmental ‘Hot Spots’ in Iraq

    Untitled Document Executive summary Introduction In July 2004, the United Nations Environment Programme (UNEP) was awarded a ...


  • Pump it up

    Aligning itself with a major equipment supplier and dealer helps the company access the tools and expertise it needs without risking too much capital. Aquatech is the distributor for Godwin Pumps of America in Ontario, Nunavut, Newfoundland and Eastern Labrador, all resource-rich territories. A recent purchase of Godwin by ITT Corporation has expanded the lineup of mine sector pumps. The company ...


    By Aquatech Dewatering Company

  • Mechanical Steam Trap Failure

    Condensate traps are commonly employed to remove condensed water from steam utilising plant and equipment.  In this context they are normally referred to as steam traps. There are many different designs of steam traps to suit a variety of circumstances. The majority of traps involve a self-actuating mechanism which detects the presence of condensate in the ...


    By EBE Engineering Ltd.

  • Enhanced Aerobic Bioremediation of Petroleum UST Releases in Puerto Rico.

    Abstract: Releases of petroleum compounds from underground storage tanks (USTs) containing diesel fuel and gasoline are a serious and increasingly prevalent problem in Puerto Rico. Remediation of groundwater impacted by these releases utilizing common methodologies can be quite costly and require long periods of time to implement. Oxygen is often the limiting factor retarding optimal ...


    By REGENESIS

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you